CONSTRUCTION
A manual transmission case sub-assembly, rear transmission case, transmission intermediate plate and extension housing sub-assembly made of aluminum are used, thereby achieving light weight. In addition, the ribs have been optimally placed to reduce noise.
A ring-shaped rib is provided on the inside of the transmission intermediate plate to reduce gear noise.
Manual transmission oil separator sub-assemblies made of aluminum alloy are provided at the bottom of the manual transmission case sub-assembly and rear transmission case. This construction prevents the oil in the sump from being directly mixed by the counter shaft.
| *1 | Front Bearing Retainer Sub-assembly | *2 | Manual Transmission Oil Separator Sub-assembly |
| *3 | Extension Housing Sub-assembly | *4 | Rear Transmission Case |
| *5 | Transmission Intermediate Plate | *6 | Manual Transmission Case Sub-assembly |
| *a | Ring-shaped Rib | - | - |