Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
NM35X0E _55 Steering _079957 POWER ASSIST SYSTEMS _0389050 POWER STEERING SYSTEM GE GENERAL F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A rack and pinion type steering gear is used.


b.

A Variable Flow Control (VFC) power steering is used on models with VFC solenoid Valve.



MAIN FEATURES


a.

Variable Flow Control (VFC) Power Steering

i.

The VFC power steering is provided with a solenoid valve, which is controlled by the power steering ECU, in the vane pump.


ii.

The solenoid valve controls the discharge flow rate of the power steering fluid in accordance with the operating conditions of the steering wheel, vehicle speed and engine speed . Thus, the solenoid valve reduces the load on the engine applied by the actuation of the vane pump, and improves fuel economy.