Home › Engine / Hybrid System › 7GR-FKS (FUEL) › FUEL SYSTEM
NM35X0E _51 Engine / Hybrid System _079947 7GR-FKS FUEL _0389301 FUEL SYSTEM GE GENERAL F

7GR-FKS FUEL  FUEL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The 7GR-FKS engine uses a Direct injection 4-stroke gasoline engine Superior version (D-4S) system, which has both direct and port type fuel injection.


b.

This system optimally controls the direct fuel injector assembly and port fuel injector assembly in accordance with engine load. The system achieves improved engine performance, fuel economy, and clean emissions.


c.

Fuel cut control is used to stop the fuel pump assembly (for low pressure) if any SRS airbag is deployed.


d.

Direct fuel injector assemblies with 1-hole type high pressure slit nozzles are used.


e.

The Direct injection 4-stroke gasoline engine Superior version (D-4S) system is based on 2 types of fuel injection systems: the direct injection system and the port injection system. Fuel sent from the fuel tank assembly is delivered to the low-pressure and high-pressure fuel systems. The fuel delivered to the low-pressure fuel system is injected from the port fuel injector assembly to the intake port. The fuel delivered to the high-pressure fuel system is pressurized by the fuel pump assembly (for high pressure side) and injected from the direct fuel injector assembly to the combustion chamber.


f.

The direct injection system mainly consists of the fuel pump assembly (for high pressure), fuel delivery pipe assembly (for direct injection) and direct fuel injector assembly. In this system, the ECM controls the fuel pump assembly (for high pressure) and direct fuel injector assembly based on signals from various sensors, optimally controlling fuel pressure, injection volume, and injection timing.


g.

The port injection system mainly consists of the fuel pump assembly (for low pressure), fuel delivery pipe with sensor assembly (for port injection), and port fuel injector assembly. In this system, the ECM controls the fuel injector assembly (for port injection) based on signals from various sensors, optimally controlling injection volume and timing.