Home › Engine / Hybrid System › 7GR-FKS (EMISSION CONTROL) › EMISSION CONTROL SYSTEM
NM35X0E _51 Engine / Hybrid System _079948 7GR-FKS EMISSION CONTROL _0389302 EMISSION CONTROL SYSTEM GE GENERAL F

7GR-FKS EMISSION CONTROL  EMISSION CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Exhaust Emission Control System

i.

Three-Way Catalytic converters (TWCs) are used in order to reduce exhaust emissions.


ii.

The ECM controls fuel injection volume based on the signals from the air fuel ratio sensor and heated oxygen sensor, optimizing the exhaust emissions.


iii.

An secondary air injection system is used.*

*: Models with secondary air injection system




b.

Evaporative Emission Control System

i.

The evaporative emission control system prevents the fuel vapor that is created in the fuel tank assembly from being released directly into the atmosphere.


ii.

The canister stores the fuel vapor that has been created in the fuel tank assembly.


iii.

This system consists of a purge VSV, canister and ECM.


iv.

The ECM controls the purge VSV in accordance with the driving conditions in order to direct the fuel vapor into the engine, where it is burned.