CONSTRUCTION
A paper type air cleaner filter element sub-assembly is used.
Non-woven fabric is used for the No. 1 air cleaner inlet. As a result, resonance sound is suppressed, reducing engine noise.
A metal mesh is used for the air cleaner filter element sub-assembly. As a result, element deformation is suppressed, which makes it possible to increase its size, improving cleaning efficiency and reducing pressure loss.
An intake air resonator is used, decreasing muffled sounds inside the vehicle.
2 types of resonators are used in the air cleaner hose with resonator assembly. The intake air resonator is a 3-part integrated type resonator, and the No. 2 intake air resonator is a side branch type resonator. As a result, muffed sounds inside the vehicle are decreased and engine noise is reduced.
| *1 | Air Cleaner Cap Sub-assembly | *2 | Air Cleaner Filter Element Sub-assembly (Paper Type) |
| *3 | Air Cleaner Case Sub-assembly | *4 | No. 1 Air Cleaner Inlet |
| *5 | Intake Air Resonator | *6 | Air Cleaner Hose with Resonator Assembly |
| *7 | Intake Air Resonator | *8 | No. 2 Intake Air Resonator |
| *9 | No. 1 Air Cleaner Hose | *10 | Mass Air Flow Meter Sub-assembly |
| *a | Non-woven Fabric | - | - |