CONSTRUCTION
The slide door lock remote control assembly consists mainly of various control levers and various switches.
When the slide door is fully opened or fully closed, the control lever in the slide door lock remote control assembly is operated to disengage the latch in the slide door front lock assembly and the power slide door lock assembly in the slide door via the cable.
The status of each control lever is detected via an inside handle switch (open), outside handle switch (open) and handle switch (close).
| *1 | Handle Switch | *2 | Inside Handle Switch |
| *3 | Outside Handle Switch | *4 | Slide Door Lock Remote Control Assembly |
| *a | To Outside Handle | *b | To Inside Handle (Open) |
| *c | To Inside Handle (Close) | *d | To Slide Door Full Open Stop Lock Assembly |
| *e | To Power Slide Door Lock Assembly | *f | To Power Slide Door Lock Assembly |
| *g | To Slide Door Front Lock Assembly | - | - |
| *1 | Slide Door Lock Control Lever Sub-assembly LH | *2 | Inside Handle Switch |
| *a | Inside Handle Open Operation | *b | Slide Door Lockins Open Cable Assembly Operation Direction |
| *1 | No. 3 Slide Door Lock Control Lever LH | *2 | Outside Handle Switch |
| *a | Outside Handle Open Operation | *b | Outside Handle Link Operation Direction |
| *1 | No. 4 Slide Door Lock Control Lever LH | *2 | Handle Switch |
| *3 | No. 3 Slide Door Lock Control Lever LH | - | - |
| *a | Inside Handle Close Operation | *b | Outside Handle Close Operation |
| *c | Slide Door Lock Inside Locking Close Cable Assembly Operation Direction | *d | Outside Handle Link Operation Direction |
| Handle Operation | Inside Handle Switch | Outside Handle Switch | Handle Switch |
|---|---|---|---|
| Open | Open | Close | |
| Not Operation | Off | Off | Off |
| Inside Handle Open Operation | On | Off | Off |
| Outside Handle Open Operation | Off | On | Off |
| Inside/Outside Handle Close Operation | Off | Off | On |
OPERATION
Open Operation (Slide Door Front Lock Assembly and Power Slide Door Lock Assembly Locks Released) by Operation of Slide Door Inside Handle
The slide door lockins open cable assembly (*1 in illustration) connected to the slide door inside handle moves in the direction indicated by the arrow in the illustration (*a) according to the operation of the slide door inside handle.
The slide door lock control lever sub-assembly (*2 in illustration) connected to the slide door lockins open cable assembly (*1 in illustration) pulls in the direction indicated by the arrow in the illustration (*b) and turns the inside handle switch is on (*3 in illustration).
The slide door lock control lever sub-assembly (*2 in illustration) rotates the No. 1 slide door lock control lever (*4 in illustration) through the slide door remote control pin (*5 in illustration) in the direction of the arrow in the illustration (*c), then the No. 1 slide door lock control lever (*4 in illustration) rotates the No. 2 slide door lock control lever (*6 in illustration) through the slide door remote control pin (*7 in illustration) in the direction of the arrow in the illustration (*d).
At the same time, the rotation of the No. 2 slide door lock control lever (*6 in illustration) as indicated by the arrow in the illustration (*d) pulls the slide door control cable assembly (*8 in illustration) and slide door closer open cable assembly (*9 in illustration), and releases the locks of the slide door front lock assembly and power slide door lock assembly.
| *1 | Slide Door Lockins Open Cable Assembly | *2 | Slide Door Lock Control Lever Sub-assembly |
| *3 | Inside Handle Switch | *4 | No. 1 Slide Door Lock Control Lever |
| *5 | Slide Door Remote Control Pin | *6 | No. 2 Slide Door Lock Control Lever |
| *7 | Slide Door Remote Control Pin | *8 | Slide Door Control Cable Assembly |
| *9 | Slide Door Closer Open Cable Assembly | - | - |
| *a | Slide Door Lockins Open Cable Assembly Operation Direction | *b | Slide Door Lock Control Lever Sub-assembly Operation Direction |
| *c | No. 1 Slide Door Lock Control Lever Rotation Direction | *d | No. 2 Slide Door Lock Control Lever Rotation Direction |
Close Operation (Slide Door Full Open Stop Lock Assembly Lock Released) by Operation of Slide Door Inside Handle
The slide door lock inside locking close cable assembly (*1 in illustration) connected to the slide door inside handle moves in the direction indicated by the arrow in the illustration (*a) according to the operation of the slide door inside handle.
The No. 4 slide door lock control lever (*2 in illustration) connected to the slide door lock inside locking close cable assembly (*1 in illustration) pulls in the direction indicated by the arrow in the illustration (*b) and turns the handle switch (*3 in illustration) is on.
The No. 4 slide door lock control lever (*2 in illustration) rotates No. 5 slide door lock control lever (*4 in illustration) in the direction of arrow in the illustration (*c).
At the same time, the rotation of the No. 5 door lock control lever (*4 in illustration) as indicated by the arrow in the illustration (*c) pulls the slide door lock control cable assembly (*5 in illustration), and releases the lock of the slide door full open stop lock assembly.
| *1 | Slide Door Lock Inside Locking Close Cable Assembly | *2 | No. 4 Slide Door Lock Control Lever |
| *3 | Handle Switch | *4 | No. 5 Slide Door Lock Control Lever |
| *5 | Slide Door Lock Control Cable Assembly | - | - |
| *a | Slide Door Lock Inside Locking Close Cable Assembly Operation Direction | *b | No. 4 Slide Door Lock Control Lever Rotation Direction |
| *c | Slide Door Lock Control Cable Assembly Pulling Direction | - | - |
Open Operation (Slide Door Front Lock Assembly and Power Slide Door Lock Assembly Locks Released) by Operation of Slide Door Outside Handle
The outside handle link (*1 in illustration) connected to the slide door outside handle moves in the direction indicated by the arrow in the illustration (*a) according to the operation of the slide door outside handle.
The No. 3 slide door lock control lever (*2 in illustration) connected to the outside handle link (*1 in illustration) pulls in the direction indicated by the arrow in the illustration (*b) and turns the outside handle switch (*3 in illustration) is on).
The No. 3 slide door lock control lever (*2 in illustration) rotates the No. 2 slide door lock control lever (*4 in illustration) through the slide door remote control pin (*5 in illustration) in the direction of the arrow in the illustration (*c).
At the same time, the rotation of the No. 2 door lock control lever (*4 in illustration) as indicated by the arrow in the illustration (*c) pulls the slide door control cable assembly (*6 in illustration) and slide door closer open cable assembly (*7 in illustration), and releases the locks of the slide door front lock assembly and power slide door lock assembly.
| *1 | Outside Handle Link | *2 | No. 3 Slide Door Lock Control Lever |
| *3 | Outside Handle Switch | *4 | No. 2 Slide Door Lock Control Lever |
| *5 | Slide Door Remote Control Pin | *6 | Slide Door Control Cable Assembly |
| *7 | Slide Door Closer Open Cable Assembly | - | - |
| *a | Outside Handle Link Operation Direction | *b | No. 3 Slide Door Lock Control Lever Rotation Direction |
| *c | No. 2 Slide Door Lock Control Lever Rotation Direction | - | - |
Close Operation (Slide Door Full Open Stop Lock Assembly Lock Released) by Operation of Slide Door Outside Handle
The outside handle link (*1 in illustration) connected to the slide door outside handle moves in the direction indicated by the arrow in the illustration (*a) according to the operation of the slide door outside handle.
The No. 3 slide door lock control lever (*2 in illustration) connected to the outside handle link (*1 in illustration) pushes in the direction indicated by the arrow in the illustration (*b).
The No. 3 slide door lock control lever (*2 in illustration) rotates the No. 4 slide door lock control lever (*3 in illustration) in the direction of the arrow in the illustration (*c) and turns the handle switch is on (*4 in illustration).
At the same time, the rotation of the No. 5 door lock control lever (*5 in illustration) as indicated by the arrow in the illustration (*d) pulls the slide door lock control cable assembly (*6 in illustration), and releases the lock of the slide door full open stop lock assembly.
| *1 | Outside Handle Link | *2 | No. 3 Slide Door Lock Control Lever |
| *3 | No. 4 Slide Door Lock Control Lever | *4 | Handle Switch |
| *5 | No. 5 Slide Door Lock Control Lever | *6 | Slide Door Lock Control Cable Assembly |
| *a | Outside Handle Link Operation Direction | *b | No. 3 Slide Door Lock Control Lever Rotation Direction |
| *c | No. 4 Slide Door Lock Control Lever Rotation Direction | *d | No. 5 Slide Door Lock Control Lever Rotation Direction |
| *e | Slide Door Lock Control Cable Assembly Pulling Direction | - | - |