CONSTRUCTION
Accessory components are driven by a serpentine belt consisting of a single V-ribbed belt. It reduces the overall engine length, weight and number of engine parts.
An automatic tensioner eliminates the need for tension adjustment.
A crankshaft damper sub-assembly with built-in isolation rubber is used. Rotation fluctuations from the crankshaft assembly are absorbed by the isolation rubber and transmitted to the pulley, reducing the tension applied to the V-ribbed belt.*
*: Models with M/T
| *A | Models with A/T | *B | Models with M/T |
| *1 | V-ribbed Belt Tensioner Assembly | *2 | Water Pump Pulley |
| *3 | Crankshaft Pulley | *4 | Crankshaft Damper Sub-assembly |
| *5 | Compressor Pulley | *6 | Alternator Pulley |
| *7 | Power Steering Pump Pulley | - | - |
| *a | Rotation Fluctuations are Absorbed | *b | Large Rotation Fluctuations |
| *c | Isolation Rubber | *d | Small Rotation Fluctuations |