Home › Engine / Hybrid System › 1GD-FTV (ENGINE MECHANICAL) › ENGINE UNIT › 2019.02–2019.06
NM35X0E _51 Engine / Hybrid System _080140 1GD-FTV ENGINE MECHANICAL _0389534 ENGINE UNIT GE GENERAL F

1GD-FTV ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 1GD-FTV TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is an in-line 4-cylinder, 2.8-liter, 16-valve DOHC, turbocharged diesel engine. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibrations.


b.

An intercooler is provided. This lowers the intake air temperature and improves power output.



SPECIFICATION


Engine Type 1GD-FTV
w/ Variable Nozzle Vane Type Turbocharger
w/ Solenoid Type Injector

*1: Except models for Philippines (Gross Vehicle Mass (GVM): 3.5 t or less)

*2: Except models for Philippines (GVM: exceeds 3.5 t)

*3: Models for Philippines

*4: Models with manual transmission (M/T)

*5: Models with automatic transmission (A/T) and Exhaust Gas Recirculation (EGR) system (with EGR cooler)

*6: Models with A/T and EGR system (without EGR cooler) or models with A/T without EGR system

*7: Models with EGR system (with EGR pre-cooler)

*8: Models with EGR system (without EGR pre-cooler) or models without EGR system

*9: Varies depending on the vehicle specification.

*10: The figure shown is the weight of the part without coolant and oil.

*11: The figure shown is a representative example.

*12: Models with A/T and UREA SCR system

*13: Models with M/T and UREA SCR system

No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
Combustion Chamber Direct Injection Type
Manifolds Cross-flow
Fuel System Common-rail Type
Displacement cm3 (cu. in.) 2755 (168.1)
Bore x Stroke mm (in.) 92.0 x 103.6 (3.62 x 4.08)
Compression Ratio 15.6 : 1
Max. Output (EEC)*1 kW@rpm 130@3400*4*5
115@3600*6
Max. Output (EEC)*2 kW@rpm 120@3600*7
115@3600*8
Max. Output (EEC)*3 kW@rpm 130@3400
Max. Torque (EEC)*1 N*m@rpm 420@1400 to 2600*4
450@1600 to 2400*5
420@1600 to 2200*6
Max. Torque (EEC)*2 N*m@rpm 420@1600 to 2200
Max. Torque (EEC)*3 N*m@rpm 420@1400 to 2600
Valve Timing Intake Open 6°BTDC
Closed 29°ABDC
Exhaust Open 40°BBDC
Closed 10°ATDC
Firing Order 1 - 3 - 4 - 2
Fuel Cetane Number 48 or higher
Emission Regulation*9 -
EURO 1
EURO 2
EURO 3
EURO 4
EURO 5
EURO 6
Engine Service Mass (Reference)*10*11 kg (lb) 285 (628.3)*12
313 (690.0)*13


MAIN FEATURES


a.

This engine is able to achieve the following through the use of the items listed below:

(1) High performance and fuel economy

(2) Low noise and vibration

(3) Lightweight and compact design

(4) Good serviceability

(5) Clean emissions


Item (1) (2) (3) (4) (5)

*1: Models without EGR pre-cooler

*2: Models with EGR pre-cooler

*3: Models with EGR system

*4: Models with EGR system (with No. 2 EGR valve assembly)

*5: Models with catalyst support control

*6: Models with UREA SCR system

A cylinder head cover sub-assembly made of plastic is used. - ○ ○ - -
An oil mist separator is used on the cylinder head cover sub-assembly. - - - - ○
A cylinder head sub-assembly made of aluminum alloy is used. - - ○ - -
A tangential port and a helical port are used on the intake port. ○ - - - ○
A piston provided with a combustion chamber is used. ○ ○ - - ○
Connecting rod sub-assemblies made of high tension material. ○ ○ ○ - -
A timing chain and a chain tensioner are used. - ○ - ○ -
Valve lash adjuster assemblies are used. - ○ - ○ -
Valve rocker arm sub-assemblies are used. ○ ○ ○ ○ -
Toyota Genuine Super Long Life Coolant (SLLC) is used. - - - ○ -
A serpentine belt drive system is used. - - ○ ○ -
A diesel throttle valve is used. ○ ○ - - ○
A variable nozzle vane type turbocharger sub-assembly is used.*1 ○ - - - ○
A variable nozzle vane type turbocharger sub-assembly is used. (Water-cooling structure)*2 ○ - - ○ ○
An intercooler assembly is used. ○ - - - ○
A supply pump assembly is used. ○ ○ ○ - ○
A common-rail type fuel injection system is used. ○ ○ - - ○
An injector assembly is provided in the bore center. ○ ○ - - ○
Compensation values and Quick Response (QR) codes are used. ○ - - ○ ○
A mass air flow meter sub-assembly is used. ○ - - - ○
A pilot injection control system is used. - ○ - - ○
An EGR system is used.*3 - - - - ○
An EGR cooler with bypass is used.*4 - - - - ○
An oxidation catalyst is used.*4 - - - - ○
A DPF is used.*5 - - - - ○
An UREA SCR system is used.*6 - - - - ○
An SCR catalyst is used.*6 - - - - ○