CONSTRUCTION
A stainless steel exhaust pipe is used for weight reduction and improved rust resistance.
| *1 | Front Exhaust Pipe Assembly | *2 | Center Exhaust Pipe Assembly |
| *3 | Tail Exhaust Pipe Assembly | - | - |
| *a | SCR Catalyst | *b | Main Muffler |
| *1 | Front Exhaust Pipe Assembly | *2 | Center Exhaust Pipe Assembly |
| *3 | Tail Exhaust Pipe Assembly | - | - |
| *a | Main Muffler | *b | The illustration is a representative example. |
| *1 | Front Exhaust Pipe Assembly | *2 | Center Exhaust Pipe Assembly |
| *3 | Tail Exhaust Pipe Assembly | - | - |
| *a | Sub Muffler | *b | Main Muffler |
| *c | The illustration is a representative example. | - | - |
A ball joint mechanism consists of a flange with a round surface, 2 bolts that support the gasket seal, and a spring. Compared to a flexible pipe, a more compact structure can be achieved, enabling the ball joints to be mounted at the optimized position to dampen vibrations.
Vibrations caused by the engine and resonant frequency vibrations of the exhaust pipe are absorbed by the ball joints (flanges and rounded parts of the gasket), reducing vibrations and noise.
| *1 | Flange Bolt | *2 | Compression Spring |
| *3 | Flange | - | - |
| *a | Swing | - | - |
|
Exhaust Flow | - | - |