OUTLINE
The cooling system uses a pressurized forced circulation system with a pressurized reserve tank.
The pressurized reserve tank is used to prevent the engine coolant from deteriorating upon contact with external air.
A thermostat with a bypass valve is located on the water inlet housing to maintain suitable temperature distribution in the cooling system.
An aluminum radiator core is used for weight reduction.
A water-cooled type engine oil cooler is used.
A mesh type radiator protector is positioned in front of the radiator assembly to maintain radiator assembly cooling performance while ensuring reliability.*
A 3-stage linear temperature-controlled fluid coupling assembly is used.
Toyota Genuine Super Long Life Coolant (SLLC) is used.
*: Models without air conditioning system
| *A | Models without Air Conditioning System | - | - |
| *1 | Radiator Reserve Tank Assembly | *2 | Radiator Assembly |
| *3 | Radiator Protector | *4 | Water Inlet |
| *5 | Thermostat | *6 | Oil Cooler Assembly |
| *7 | Water Outlet | *8 | Turbo Water Pipe Sub-assembly |
| *9 | Turbocharger Sub-assembly | - | - |
| *A | Models without Air Conditioning System | *B | Models with Cold Area |
| *C | Models with EGR Pre-cooler | - | - |
| *1 | Radiator Reserve Tank Assembly | *2 | Radiator Assembly |
| *3 | Radiator Protector | *4 | Water Inlet |
| *5 | Thermostat | *6 | Oil Cooler Assembly |
| *7 | Diesel Throttle Body Assembly | *8 | EGR Valve Adapter |
| *9 | EGR Pipe with Cooler Sub-assembly | *10 | Electric EGR Control Valve Assembly |
| *11 | Water Outlet | *12 | Turbo Water Pipe Sub-assembly |
| *13 | Turbocharger Sub-assembly | *14 | Compressor Inlet Elbow |
| *A | Models without Air Conditioning System | - | - |
| *1 | Radiator Reserve Tank Assembly | *2 | Radiator Assembly |
| *3 | Radiator Protector | *4 | Water Inlet |
| *5 | Thermostat | *6 | Oil Cooler Assembly |
| *7 | No. 1 EGR Cooler | *8 | No. 2 EGR Valve Assembly |
| *9 | Electric EGR Control Valve Assembly | *10 | Water Outlet |
| *11 | Turbo Water Pipe Sub-assembly | *12 | Turbocharger Sub-assembly |
| *A | Models without Air Conditioning System | *B | Models with Cold Area |
| *C | Models with EGR Pre-cooler | - | - |
| *1 | Radiator Reserve Tank Assembly | *2 | Radiator Assembly |
| *3 | Radiator Protector | *4 | Water Inlet |
| *5 | Thermostat | *6 | Oil Cooler Assembly |
| *7 | No. 1 EGR Cooler | *8 | Diesel Throttle Body Assembly |
| *9 | No. 2 EGR Valve Assembly | *10 | EGR Pipe with Cooler Sub-assembly |
| *11 | Electric EGR Control Valve Assembly | *12 | Water Outlet |
| *13 | No. 1 Injector Holder | *14 | Turbo Water Pipe Sub-assembly |
| *15 | Turbocharger Sub-assembly | *16 | Compressor Inlet Elbow |
| *a | The illustration is a representative example. | - | - |
SPECIFICATION
Engine Coolant
| Engine Coolant Type | Toyota Genuine Super Long Life Coolant (SLLC) or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids). Do not use plain water alone. | |
| Maintenance Intervals | First Time | 160000 km (100000 miles) |
| Subsequent | Every 80000 km (50000 miles) | |
| Color | Pink | |
SLLC is pre-mixed (50% coolant and 50% deionized water). Therefore, no dilution is needed when SLLC in the vehicle is added or replaced.
Thermostat
| Thermostat Opening Temperature | 80°C to 84°C (176°F to 183°F) |