CONSTRUCTION
The shock absorber is installed so that it angles forward from the rear side of the leaf spring, ensuring driving stability and a comfortable ride.
A bush with an inter-ring is used for the upper and lower parts of the shock absorber assembly. As a result, rigidity is optimized and driving stability is ensured while reducing vibration and noise.
The shape of the piston valve is optimized, achieving linear responsiveness when switching between expansion and contraction.
| *1 | Rear Shock Absorber Assembly | *2 | Rear Shock Absorber Bush |
| *3 | Oil Seal | *4 | Rebound Stopper |
| *5 | Piston Valve | - | - |
|
Low-pressure (N2) Gas | - | - |