CONSTRUCTION
A hollow type stabilizer bar is used.
The installation position is optimized, improving roll rigidity. As a result, rolling is suppressed during turning, achieving a stable turning posture.
A ball joint type stabilizer link is used, improving driving stability.
A saddle type stabilizer bush, which is secured with a bracket, is used to ensure excellent fastening performance.
| *1 | Front Stabilizer Bar | *2 | Front Stabilizer Link Assembly |
| *3 | Front Stabilizer Bar Bush | *4 | Front Stabilizer Bracket |
| *a | A - A Cross Section | *b | Outer Side |
| *c | Inner Side | - | - |