Home › Vehicle Interior › MIRROR (INT) › DIGITAL REAR-VIEW MIRROR SYSTEM
NM35X0E _58 Vehicle Interior _078532 MIRROR (INT) _0390214 DIGITAL REAR-VIEW MIRROR SYSTEM GE GENERAL F

MIRROR (INT)  DIGITAL REAR-VIEW MIRROR SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Digital Rear-view Mirror System

i.

The digital rear-view mirror system is a driving assist device that displays video from the inner mirror camera assembly on the display in the inner mirror.


ii.

By operating the switching lever, optical mirror mode is changed to digital mirror mode.


iii.

The digital rear-view mirror system enables the driver to check the rear without the headrest, luggage, etc. obstructing the view. In addition, the privacy of rear seats passengers is protected by not displaying a view of the rear seats.

V123507C01
4.031,2.688 3.563,2.031 true 4.063,2.698 4.375,2.896 0.313,0.198 10 false *1 3.479,3.365 3.792,3.563 0.313,0.198 10 false *a 3.5,4.854 3.813,5.052 0.313,0.198 10 false *b 1.677,5.5 1.875,5.698 0.198,0.198 10 false *c 5.313,5.49 5.51,5.677 0.198,0.188 10 false *d
*1 Switching Lever - -
*a Switching Lever Pulled Forward *b Switching Lever Pushed Backward
*c Optical Mirror Mode *d Digital Mirror Mode




b.

Camera Cleaner System

i.

A camera cleaner system is used.


ii.

The camera cleaner system uses a nozzle installed on top of the inner mirror camera to spray washer fluid onto the surface of the camera lens, cleaning off foreign matter that is attached to it (such as water, mud, snow and snow-melting agents) and improving the visibility of the camera image.




PRECAUTION


a.

Digital Rear-view Mirror System

i.

Knowledge

1.

The digital rear-view mirror may generate heat, but this is not a malfunction.

2.

If a passenger stares at the digital rear-view mirror screen, he/she may feel the effects of car sickness (dizziness).

3.

Do not touch or cover the sensors as it may cause the sensors to operate incorrectly.

4.

The image color may differ from the actual color in dark locations (at night, etc.), but this is not a malfunction.

5.

Depending on the age and health condition of the user, it may take a while until he/she can focus on the digital rear-view mirror screen. If it is difficult to focus on the screen, change to mirror surface mode or stop the vehicle in a safe location to adjust the digital rear-view mirror.

6.

If the digital rear-view mirror screen is too bright, your eyes may get tired. Adjust the brightness to a moderate level.

7.

If you experience discomfort due to flickering lights from vehicles to the rear, change to mirror surface mode.



ii.

Cautions

1.

Check around the vehicle with your own eyes while driving.

2.

Before driving for the first time or when changing driver, always park the vehicle in a safe place to adjust the digital rear-view mirror and do not adjust it while driving. If the vehicle is driven without first adjusting the mirror, double images may occur. In addition, if the display is difficult to see due to external light reflections caused by a vehicle with a sunroof, etc., close the shade.

3.

The actual size of vehicles and obstacles displayed on the digital rear-view mirror screen may differ from the actual size. When driving in reverse, always directly confirm the surroundings of the vehicle (particularly the area to the rear).

4.

If a vehicle to the rear approaches the vehicle while in a dark location (at night, etc.), the image of the surrounding area may be displayed darker than it actually is. Check around the vehicle with your own eyes.

5.

The image range displayed on the digital rear-view mirror screen and the one displayed on the digital rear-view mirror on optical mirror mode differs, so confirm the difference beforehand.



iii.

Troubleshooting

1.

If it is difficult to see the digital rear-view mirror screen due to the exhaust gas interfering with the image, change to optical mirror mode.

2.

If the images on the digital rear-view mirror screen are misaligned because the back door is not completely closed, close it.

3.

If it is difficult to see the digital rear-view mirror screen due to interference by a strong light source (such as the sun, the light from the headlights, etc.) reflected on the screen, change to optical mirror mode. (If light from the moon roof is reflected, close the sun shade.)

4.

If it is difficult to see the digital rear-view mirror screen because water, snow, mud, etc. is stuck to the back door glass, change to optical mirror mode.

5.

If it is difficult to see the digital rear-view mirror screen because the screen is used under lighting conditions such as halogen, sodium and mercury light sources, etc., change to optical mirror mode.



iv.

Handling Guide

1.

When wiping the camera lens, wipe dirt on the lens with a wet soft cloth.



v.

Notice

1.

Do not subject the camera to strong impacts by hitting it, throwing objects at it, etc. The installation position and angle of the camera may become misaligned.

2.

Do not remove, disassemble or modify the camera.

3.

Do not strongly rub the camera lens. Otherwise, the lens may get damaged and the camera may not be able to capture clear images.

4.

Do not remove, disassemble or modify the mirror.

5.

When applying colored film (including transparent film) to the rear window glass, do not apply it to the area in front of the camera. If film is applied to the area in front of the camera, the image from the camera may not display properly.




b.

Camera Cleaner System

i.

Knowledge

1.

If there is a sufficient amount of washer fluid but it does not spray out, check the nozzle for blockages.

2.

The camera cleaner system cleans off foreign matter that is attached to the surface of the camera lens. Therefore, it cannot clean off ice, snow, or other foreign matter that is displayed in the camera image if the foreign matter is attached to surfaces near the camera.

3.

Do not subject the camera to sudden temperature changes such as by pouring hot water into the camera under cold weather.

4.

The washer tank is shared with the windshield washer, so if the camera cleaner system is frequently used, the washer fluid will need to be replaced more often.



ii.

Cautions

1.

During camera cleaner system operation, the sprayed washer fluid may make it difficult to see the camera image. Drive carefully while confirming the safety of your surroundings.

2.

If washer fluid remains on the surface of the camera lens after the camera cleaner system operates, the image may become difficult to see at night depending on the headlight height and angle of vehicles to the rear.



iii.

Handling Guide

1.

Depending on the type of foreign matter attached to the surface of the camera lens, the camera cleaner system may not completely clean the camera lens. If this occurs, wash the camera lens with a large amount of water and wipe the lens with a wet soft cloth.



iv.

Notice

1.

If washer fluid does not spray out, do not continue to operate the camera cleaner switch*1 or rear washer switch*2. Doing so may damage the pump.

2.

In order to prevent the washer fluid from freezing, use a washer fluid that is appropriate for the outside air temperature.

3.

Do not allow water to directly contact the nozzle when washing the vehicle with a high pressure washer. The inner mirror camera assembly may stop operating normally if subject to impact from high pressure water. Also, water may enter the nozzle injection opening and freeze, causing the washer fluid to not spray properly.


*1: Models without rear washer system

*2: Models with rear washer system