Home › Vehicle Interior › INTERIOR PANELS / TRIM › INTERIOR › 2019.02–2019.06
NM35X0E _58 Vehicle Interior _078980 INTERIOR PANELS / TRIM _0391537 INTERIOR GE GENERAL F

INTERIOR PANELS / TRIM  INTERIOR  GENERAL  GENERAL  


OUTLINE


a.

Design Theme

i.

Pro-TECH COMFORT (Comfortable spaces for both the driver and passengers)

·

Aim to create a friendly and comfortable interior

-

Provide an "interior area" for passengers that is comfortable and roomy

-

Provide a "pro work area" for the driver that boosts their professional morale

-

Provide a "welcome area" that comfortably welcomes passengers

Design Theme (The illustration shown is an image only.)
V123144C01
0.5,3.583 0.583,3.583 0.583,3.583 1.833,2.333 true 2.417,4.75 2.5,4.75 2.5,4.75 3.083,4.167 true 5.583,2.167 6.417,1.333 6.417,1.333 6.5,1.333 true 6.552,1.25 6.865,1.406 0.313,0.156 10 false *a 2.26,4.667 2.573,4.823 0.313,0.156 10 false *b 0.354,3.49 0.667,3.646 0.313,0.156 10 false *c
*a Area Near Instrument Panel *b Sliding Door Opening
*c Passenger Area - -






b.

Comfortable and Open Mobile Space

i.

While taking into consideration dirt-disguising functionality, the colors, patterns and shapes from the ceiling to the trim, seat and floor areas are coordinated to create an open and mobile space.

Comfortable and Open Mobile Space (The illustration shown is an example only.)
V123145



c.

Bright Atmosphere Design Elements

i.

The starting edge of the dark color is lowered to increase the area covered by the light beige color of the trim upper, brightening the interior (interior color: Fromage).

Bright Atmosphere Design Elements (The illustration shown is an example only.)
V123146



d.

Open Atmosphere Design Elements

i.

The areas around the windows are chamfered, expressing a sense of roominess and modernity.

Open Atmosphere Design Elements (The illustration shown is an example only.)
V123147



e.

Comfortable Passenger Area Design Elements

i.

Depending on the model, utility elements are provided within reach of each seat while supporting the charging of various types of IT devices.

Comfortable Passenger Area Design Elements (The illustration shown is an example only.)
V123148C01
3,0.708 3.417,0.292 3.417,0.292 3.25,0.75 true 5.406,2.333 6.823,0.917 6.823,0.917 6.906,0.917 true 3.375,0.125 3.688,0.281 0.313,0.156 10 false *1 6.948,0.823 7.115,1 0.167,0.177 10 false *2
*1 Reading Light *2 Pocket and USB Jack




f.

Scratch-and-dirt-disguising Design Elements

i.

Depending on the model, a dark color is used near the feet of passengers in consideration of dirt-disguising performance. Also, scratch-disguising relief shapes are provided for the deck side trim, etc.

Scratch-and-dirt-disguising Design Elements (The illustration shown is an example only.)
V123149C01
1.854,2.76 2.167,2.917 0.313,0.156 10 false *a 5.271,2.75 5.583,2.906 0.313,0.156 10 false *b 1.854,5.5 2.167,5.656 0.313,0.156 10 false *c 5.354,5.51 5.667,5.667 0.313,0.156 10 false *d
*a Dark Floor Color *b Lower Trim Relief Shapes
*c Floor Carpet Print Pattern *d Entrance/Exit Step Relief Shapes




g.

Passenger Seats with A Sense of Unity

i.

For models with the "Fromage" interior color, the same light beige as the ceiling and trim is used for the center parts of the seats, expressing horizontal spaciousness.

Passenger Seats with A Sense of Unity (The illustration shown is an example only.)
V123150



h.

High-quality Design Elements / Dirt-disguising Design Elements

i.

A combination of artificial leather and fabric is used for the seat to express a difference in texture, and stitching is also provided to express a high degree of craftsmanship.


ii.

A dark color is used for parts of the seats frequently contacted by passengers in consideration of dirt-disguising performance.

High-quality Design Elements / Dirt-disguising Design Elements (The illustration shown is an example only.)
V123151C01
0.667,0.75 0.25,0.333 0.25,0.333 0.167,0.333 true 4.917,2.333 4.25,1.667 4.25,1.667 4.167,1.667 true 6.063,0.906 6.479,0.49 6.479,0.49 6.563,0.49 true 5.167,2.667 5.917,3.417 5.917,3.417 6,3.417 true 4.5,2.5 3.833,3.167 3.833,3.167 3.75,3.167 true 0.021,0.26 0.333,0.417 0.313,0.156 10 false *1 6.604,0.406 6.917,0.563 0.313,0.156 10 false *2 4.01,1.583 4.323,1.74 0.313,0.156 10 false *a 3.594,3.073 3.906,3.229 0.313,0.156 10 false *b 6.042,3.323 6.354,3.479 0.313,0.156 10 false *c
*1 Rear Seat *2 Front Seat
*a Fabric *b Artificial Leather
*c Stitch - -




i.

Comfortable Passenger Area Design Elements (Utility)

i.

Utility elements are provided within reach of each seat.*

HINT:

*: Availability differs depending on the grade.


Comfortable Passenger Area Design Elements (Utility) (The illustration shown is an example only.)
V123152C01
2.25,1.083 1.667,0.5 1.667,0.5 1.583,0.5 true 2.5,1.25 1.75,2 1.75,2 1.667,2 true 2.5,1.583 1.75,2.333 1.75,2.333 1.667,2.333 true 2.583,1.917 1.75,2.75 1.75,2.75 1.667,2.75 true 4.833,2.833 4.833,0.583 4.833,0.583 3.583,1.833 true 4.667,3.083 5.083,3.5 5.083,3.5 5.167,3.5 true 1.448,0.417 1.76,0.573 0.313,0.156 10 false *1 1.51,2.25 1.823,2.406 0.313,0.156 10 false *2 1.521,2.667 1.833,2.823 0.313,0.156 10 false *3 5.208,3.417 5.521,3.573 0.313,0.156 10 false *4 1.51,1.896 1.823,2.052 0.313,0.156 10 false *a 4.802,0.385 5.115,0.542 0.313,0.156 10 false *b
*1 Assist Grip Sub-assembly *2 Bottle Holder
*3 Net Pocket *4 Rear Seat Side Pocket
*a Drink *b Magazines, etc.




j.

Design Elements Inviting Passengers to Ride

i.

The linear shape of the sliding door opening (A in illustration) expresses an opening that is larger than its dimensions. Depending on the model, an entering/exiting step illumination (step light/sliding door scuff illumination) is used and a bright light is used for the entering/exiting grip (pillar assist grip assembly) (B in illustration) in consideration of visibility, creating areas that make passengers "reflexively want to enter the vehicle".

Design Elements Inviting Passengers to Ride (The illustration shown is an example only.)
V123153C01
3.333,4 3.417,4 3.417,4 3.833,3.583 true 5.583,3.167 5.667,3.167 5.667,3.167 5.917,3.417 true 0.188,2.938 0.417,3.083 0.229,0.146 10 true *1 5.292,2.844 5.5,3 0.208,0.156 10 true *2 5.458,3.094 5.573,3.26 0.115,0.167 10 true B 3.198,3.927 3.313,4.094 0.115,0.167 10 true A
*1 Slide Door Scuff Illumination Light (or Slide Door Step Light) *2 Pillar Assist Grip Assembly




k.

Easy Cabin Movement Design Elements

i.

Design elements, such as the shape of the seat shoulder grip (rear seat shoulder belt hole cover), which is shaped in consideration of grip feeling, the interior color usage and color scheme, and patterns, are used along the line of movement to the rear passenger area in consideration of smooth passenger movement.

Easy Cabin Movement Design Elements (The illustration shown is an example only.)
V123154C01
3.99,3.75 4.302,3.906 0.313,0.156 10 false *1 1.042,3.708 1.24,3.896 0.198,0.188 10 true *a
*1 Rear Seat Shoulder Belt Hole Cover - -
*a Floor Pattern - -




l.

Open and Easy-to-use Cockpit

i.

The instrument panel is designed to fuse the driver and passenger areas.

Open and Easy-to-use Cockpit (The illustration shown is an example only.)
V123155C01
2.292,0.948 2.5,1.135 0.208,0.188 10 true *a 5.417,2.604 5.604,2.76 0.188,0.156 10 true *b
*a Driver Area *b Passenger Area




m.

Openness Design Elements

i.

The belt line is lowered and the usage of the bright interior color is expanded (top illustration), achieving a sloped shape with a sense of roominess for the passenger side (bottom illustration).

Openness Design Elements (The illustration shown is an example only.)
V123156

Openness Design Elements (The illustration shown is an example only.)
V123157



n.

Ease-of-use Design Elements

i.

Functions are concentrated near the driver seat in consideration of how far the driver reaches when performing switch operations.

Ease-of-use Design Elements (The illustration shown is an example only.)
V123158




MAIN FEATURES


a.

Distinctive External Appearance / Tactile Sensation

i.

A two-tone color scheme is used for the interior.

GRAY (The illustration shown is an example only.)
V123159C01
5,1.167 4.25,0.417 4.25,0.417 4.167,0.417 true 5.083,1.667 4.083,0.667 4.083,0.667 4,0.667 true 3.854,0.573 4.167,0.729 0.313,0.156 10 false *a 4.021,0.333 4.333,0.49 0.313,0.156 10 false *b
*a Light Gray *b Black


FROMAGE (The illustration shown is an example only.)
V123160C01
5,1.167 4.25,0.417 4.25,0.417 4.167,0.417 true 5.083,1.667 4.083,0.667 4.083,0.667 4,0.667 true 3.854,0.573 4.167,0.729 0.313,0.156 10 false *a 4.021,0.333 4.333,0.49 0.313,0.156 10 false *b
*a Fromage *b Orchid Brown



ii.

Item List

·

Standard Roof Models / Van / DX Grade

-

Wood-based panels are used in the interior to ensure space and prioritize cleanliness. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat.

Standard Roof Models / Van / DX Grade (The illustration shown is an example only.)
V123607C01
1.917,4.083 1.917,2.75 true 2.25,4.083 2.25,2.75 true 3,4.083 3,2.833 true 4.417,4.083 4.417,2.75 true 6,4.083 6,2.833 true 4.167,1.667 4.167,0.417 true 2.292,2.167 2.292,0.417 true 1.938,1.75 1.938,0.417 true 1.5,1.75 1.5,0.667 true 1.333,1.583 1.333,0.417 true 0.417,2 1.417,2 true 0.417,2.25 1,2.25 true 0.417,2.5 1.583,2.5 true 1.854,4.094 2.167,4.25 0.313,0.156 10 false *1 2.188,4.094 2.5,4.25 0.313,0.156 10 false *2 2.938,4.094 3.25,4.25 0.313,0.156 10 false *3 4.354,4.083 4.667,4.24 0.313,0.156 10 false *4 5.938,4.094 6.25,4.25 0.313,0.156 10 false *5 4.104,0.25 4.417,0.406 0.313,0.156 10 false *6 2.26,0.25 2.573,0.406 0.313,0.156 10 false *7 1.896,0.25 2.208,0.406 0.313,0.156 10 false *8 1.438,0.5 1.75,0.656 0.313,0.156 10 false *9 1.229,0.24 1.448,0.406 0.219,0.167 10 false *10 0.167,1.917 0.385,2.073 0.219,0.156 10 false *11 0.167,2.167 0.469,2.333 0.302,0.167 10 false *12 0.167,2.417 0.469,2.583 0.302,0.167 10 false *13

No. Parts Materials
*1 Front Door Trim Board Sub-assembly RH Resin
*2 Center Pillar Garnish Lower RH Resin
*3 Rear Door Trim Board Sub-assembly RH Wood Material
*4 Quarter Trim Set Wood Material
*5 Back Door Trim Board Wood Material
*6 Roof Headlining Assembly Rear Non-woven Fabric
*7 Center Pillar Garnish RH Resin
*8 Roof Inner Rack Board Front Resin
*9 RH Visor Assembly Resin + Skin (PVC)
*10 Map Light Sub-assembly Resin
*11 Pillar Assist Grip Assembly Resin (TPO)
*12 Front Pillar Garnish RH Resin
*13 Front Armrest Base Panel Upper RH Resin



·

Standard Roof Models / Van / DX Grade (Half Panel Van)

-

Wood-based panels are used in the interior to ensure space and prioritize cleanliness. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat. An assist grip assembly is also provided for the first row of rear seats in consideration of passenger posture support.

Standard Roof Models / Van / DX Grade (Half Panel Van) (The illustration shown is an example only.)
V123608C01
1.917,4.083 1.917,2.75 true 2.25,4.083 2.25,2.75 true 3,4.083 3,2.833 true 4.417,4.083 4.417,2.75 true 4.167,1.667 4.167,0.417 true 2.292,2.167 2.292,0.417 true 1.938,1.75 1.938,0.417 true 1.5,1.75 1.5,0.667 true 1.333,1.583 1.333,0.417 true 0.417,2 1.333,2 true 0.417,2.25 1,2.25 true 0.417,2.479 1.667,2.479 true 1.854,4.094 2.167,4.25 0.313,0.156 10 false *1 2.188,4.094 2.5,4.25 0.313,0.156 10 false *2 2.938,4.094 3.25,4.25 0.313,0.156 10 false *3 4.354,4.083 4.667,4.24 0.313,0.156 10 false *4 4.104,0.25 4.417,0.406 0.313,0.156 10 false *5 2.26,0.25 2.573,0.406 0.313,0.156 10 false *6 1.896,0.25 2.208,0.406 0.313,0.156 10 false *7 1.438,0.5 1.75,0.656 0.313,0.156 10 false *8 1.26,0.24 1.479,0.406 0.219,0.167 10 false *9 0.167,1.917 0.385,2.073 0.219,0.156 10 false *10 0.167,2.167 0.469,2.333 0.302,0.167 10 false *11 0.167,2.417 0.469,2.583 0.302,0.167 10 false *12

No. Parts Materials
*1 Front Door Trim Board Sub-assembly RH Resin
*2 Center Pillar Garnish Lower RH Resin
*3 Rear Door Trim Board Sub-assembly RH Wood Material
*4 Quarter Trim Set Non-woven Fabric
*5 Roof Headlining Assembly Rear Non-woven Fabric
*6 Center Pillar Garnish RH Resin
*7 Roof Inner Rack Board Front Resin
*8 RH Visor Assembly Resin + Skin (PVC)
*9 Map Light Sub-assembly Resin
*10 Pillar Assist Grip Assembly Resin (TPO)
*11 Front Pillar Garnish RH Resin
*12 Front Armrest Base Panel Upper RH Resin



·

Standard Roof Models / Commuter / DX Grade

-

Non-woven fabric is provided for the side surfaces of the interior in consideration of tactile sensation. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat. The parts of the roof headlining that pass over passengers are designed to ensure sufficient head clearance for passengers.

Standard Roof Models / Commuter / DX Grade (The illustration shown is an example only.)
V123609C02
1.917,4.083 1.917,2.75 true 2.25,4.083 2.25,2.75 true 2.448,4.083 2.448,2.5 true 3,4.083 3,2.75 true 4.333,4.083 4.333,2.667 true 3.25,1.5 3.25,0.417 true 2.292,2.167 2.292,0.417 true 1.938,1.75 1.938,0.417 true 1.5,1.75 1.5,0.667 true 1.333,1.583 1.333,0.417 true 0.417,2 1.333,2 true 0.417,2.25 1,2.25 true 0.417,2.5 1.667,2.5 true 1.854,4.094 2.167,4.25 0.313,0.156 10 false *1 2.188,4.094 2.5,4.25 0.313,0.156 10 false *2 2.396,4.094 2.708,4.25 0.313,0.156 10 false *3 2.938,4.094 3.25,4.25 0.313,0.156 10 false *4 4.271,4.094 4.583,4.25 0.313,0.156 10 false *5 3.167,0.25 3.479,0.406 0.313,0.156 10 false *6 2.26,0.25 2.573,0.406 0.313,0.156 10 false *7 1.896,0.25 2.208,0.406 0.313,0.156 10 false *8 1.438,0.5 1.75,0.656 0.313,0.156 10 false *9 1.229,0.24 1.448,0.406 0.219,0.167 10 false *10 0.167,1.917 0.385,2.073 0.219,0.156 10 false *11 0.167,2.167 0.469,2.333 0.302,0.167 10 false *12 0.167,2.417 0.469,2.583 0.302,0.167 10 false *13

No. Parts Materials
*1 Front Door Trim Board Sub-assembly RH Resin
*2 Center Pillar Garnish Lower RH Resin
*3 Pillar Assist Grip Assembly (Slide Door) Resin (TPO)
*4 Rear Door Trim Board Sub-assembly RH Wood Material
*5 Quarter Trim Set Non-woven Fabric
*6 Roof Headlining Assembly Rear Non-woven Fabric
*7 Center Pillar Garnish RH Resin
*8 Assist Grip Assembly Resin
*9 RH Visor Assembly Resin + Skin (PVC)
*10 Map Light Sub-assembly Resin
*11 Pillar Assist Grip Assembly (Front Door) Resin (TPO)
*12 Front Pillar Garnish RH Resin
*13 Front Armrest Base Panel Upper RH Resin



·

Standard Roof Models / Commuter / GL Grade

-

Window frames, which are designed based on high-speed rail trains, and ornamentation molding are used, providing a high-quality and relaxing atmosphere.

Standard Roof Models / Commuter / GL Grade (The illustration shown is an example only.)
V123610C01
1.75,3.854 1.75,2.854 true 2.667,3.833 2.667,2.75 true 4.292,3.885 4.292,3.052 true 1.583,1.75 1.583,0.75 true 1.344,1.615 1.344,0.448 true 0.75,2 1.417,2 true 0.333,2.25 1.083,2.25 true 0.667,2.469 1.333,2.469 true 2.083,2.417 2.083,2.25 true 1.917,4.135 1.917,2.969 true 1.917,2.563 1.917,2.313 true 3.406,2.448 3.406,2.115 true 3.198,3.875 3.198,2.958 true 3.115,2.51 3.115,2.323 true 2.75,2.083 2.583,2.083 true 4.615,2.448 4.615,2.146 true 4.229,2.51 4.229,2.344 true 3.948,3.948 3.948,2.781 true 1.667,2.479 1.667,2.313 true 3.24,1.563 3.24,0.313 true 4.813,1.573 4.813,0.323 true 2,1.729 2,0.479 true 2.458,2.333 2.458,0.667 true 2,2.094 2.313,2.25 0.313,0.156 10 false *1 1.688,3.885 2,4.042 0.313,0.156 10 false *2 1.854,4.167 2.167,4.323 0.313,0.156 10 false *3 1.854,2.167 2.167,2.323 0.313,0.156 10 false *4 0.51,2.396 0.677,2.552 0.167,0.156 10 false *5 3.333,1.969 3.5,2.115 0.167,0.146 10 false *6 3.146,3.896 3.458,4.052 0.313,0.156 10 false *7 2.604,3.844 2.917,4 0.313,0.156 10 false *8 3.031,2.167 3.219,2.323 0.188,0.156 10 false *9 2.771,2.01 3.021,2.167 0.25,0.156 10 false *10 4.521,2 4.74,2.167 0.219,0.167 10 false *11 4.219,3.906 4.469,4.063 0.25,0.156 10 false *12 4.125,2.177 4.344,2.333 0.219,0.156 10 false *13 3.865,3.969 4.115,4.125 0.25,0.156 10 false *14 1.563,2.167 1.813,2.323 0.25,0.156 10 false *15 0.094,2.177 0.344,2.333 0.25,0.156 10 false *16 3.146,0.167 3.396,0.323 0.25,0.156 10 false *18 4.719,0.177 4.969,0.333 0.25,0.156 10 false *17 1.906,0.323 2.156,0.479 0.25,0.156 10 false *23 1.479,0.594 1.729,0.75 0.25,0.156 10 false *19 0.531,1.917 0.781,2.073 0.25,0.156 10 false *21 1.26,0.281 1.51,0.438 0.25,0.156 10 false *20 2.365,0.5 2.615,0.656 0.25,0.156 10 false *22

No. Parts Materials
*1 Front Door Trim Board Sub-assembly RH Upper Board Resin
*2 Lower Board Resin
*3 Pocket Resin
*4 Pull Handle Resin
*5 Upper Garnish Resin
*6 Roof Headlining Assembly Rear Upper Board Resin
*7 Lower Board Resin
*8 Pocket Resin
*9 Decorative Molding Film (Silver)
*10 Slide Door Trim Cover UPR LH Garnish Resin
*11 Quarter Trim Panel Assembly RH Upper Board Resin
*12 Lower Board Resin
*13 Decorative Molding Film (Silver)
*14 Pocket Resin
*15 Front Armrest Base Panel Upper RH Paint (Black)
*16 Front Pillar Garnish RH Resin
*17 Roof Headlining Assembly Rear Non-woven Fabric
*18 Roof No. 1 Headlining Non-woven Fabric
*19 RH Visor Assembly Resin + Skin (PVC)
*20 Map Light Sub-assembly Resin
*21 Pillar Assist Grip Assembly (Front Door) Resin
*22 Pillar Assist Grip Assembly (Slide Door) Resin
*23 Assist Grip Assembly Resin



·

High Roof Models / Van / DX Grade

-

Wood-based panels are used in the interior to ensure space and prioritize cleanliness. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat. An overhead tray (roof inner rack board front) is provided to ensure storage performance while integrating an assist grip. As a result, the number of separate parts is reduced and a sleek appearance is achieved.

High Roof Models / Van / DX Grade (The illustration shown is an example only.)
V123161C01
1.917,4.083 1.917,3.083 true 2.25,4.083 2.25,3.083 true 3,4.083 3,3.083 true 4.583,4.083 4.583,2.917 true 6.083,4.083 6.083,3.083 true 4.167,1.667 4.167,0.417 true 2.333,2.5 2.333,0.417 true 1.75,2 1.75,0.417 true 1.5,2.083 1.5,0.417 true 1.25,2 1.25,0.417 true 0.417,2.333 1.417,2.333 true 0.417,2.5 1.167,2.5 true 0.417,2.75 1.75,2.75 true 2.667,1.583 2.667,0.833 true 1.854,4.094 2.167,4.25 0.313,0.156 10 false *1 2.188,4.094 2.5,4.25 0.313,0.156 10 false *2 2.938,4.094 3.25,4.25 0.313,0.156 10 false *3 4.521,4.094 4.833,4.25 0.313,0.156 10 false *4 6.021,4.094 6.333,4.25 0.313,0.156 10 false *5 4.104,0.25 4.417,0.406 0.313,0.156 10 false *6 2.25,0.25 2.563,0.406 0.313,0.156 10 false *7 1.688,0.25 2,0.406 0.313,0.156 10 false *8 1.417,0.25 1.729,0.406 0.313,0.156 10 false *9 1.115,0.25 1.583,0.406 0.469,0.156 10 false *10 0.198,2.26 0.667,2.417 0.469,0.156 10 false *11 0.198,2.427 0.667,2.583 0.469,0.156 10 false *12 0.198,2.667 0.667,2.823 0.469,0.156 10 false *13 2.573,0.688 2.875,0.844 0.302,0.156 10 false *14

No. Parts Materials
*1 Front Door Trim Board Sub-assembly RH Resin
*2 Center Pillar Garnish Lower RH Resin
*3 Rear Door Trim Board Sub-assembly RH Wood Material
*4 Quarter Trim Set Wood Material
*5 Back Door Trim Board Wood Material
*6 Roof Headlining Assembly Rear Non-woven Fabric
*7 Center Pillar Garnish RH Resin
*8 Roof Inner Rack Board Front Resin
*9 RH Visor Assembly Resin + Skin (PVC)
*10 Map Light Sub-assembly Resin
*11 Pillar Assist Grip Assembly Resin (TPO)
*12 Front Pillar Garnish RH Resin
*13 Front Armrest Base Panel Upper RH Resin
*14 Roof No. 1 Headlining Non-woven Fabric



·

High Roof Models / Commuter / DX Grade

-

Non-woven fabric is provided for the side surfaces of the interior in consideration of tactile sensation. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat. An overhead tray (roof inner rack board front) is provided to ensure storage performance while integrating an assist grip. As a result, the number of separate parts is reduced and a sleek appearance is achieved.

High Roof Models / Commuter / DX Grade (The illustration shown is an example only.)
V123611C01
1.917,4.083 1.917,3.083 true 2.25,4.083 2.25,3.083 true 3,4.083 3,3.083 true 4.583,4.083 4.583,2.917 true 4.167,1.667 4.167,0.417 true 2.333,2.5 2.333,0.417 true 1.75,2 1.75,0.417 true 1.5,2.083 1.5,0.417 true 1.25,2 1.25,0.417 true 0.417,2.333 1.417,2.333 true 0.417,2.5 1.167,2.5 true 0.417,2.75 1.75,2.75 true 1.854,4.094 2.167,4.25 0.313,0.156 10 false *1 2.188,4.094 2.5,4.25 0.313,0.156 10 false *2 2.938,4.094 3.25,4.25 0.313,0.156 10 false *3 4.521,4.094 4.833,4.25 0.313,0.156 10 false *4 4.104,0.25 4.417,0.406 0.313,0.156 10 false *5 2.25,0.25 2.563,0.406 0.313,0.156 10 false *6 1.688,0.25 2,0.406 0.313,0.156 10 false *7 1.417,0.25 1.729,0.406 0.313,0.156 10 false *8 1.177,0.25 1.344,0.406 0.167,0.156 10 false *9 0.198,2.26 0.667,2.417 0.469,0.156 10 false *10 0.198,2.427 0.667,2.583 0.469,0.156 10 false *11 0.198,2.667 0.667,2.823 0.469,0.156 10 false *12

No. Parts Materials
*1 Front Door Trim Board Sub-assembly RH Resin
*2 Center Pillar Garnish Lower RH Resin
*3 Rear Door Trim Board Sub-assembly RH Non-woven Fabric
*4 Quarter Trim Set Non-woven Fabric
*5 Roof Headlining Assembly Rear Non-woven Fabric
*6 Center Pillar Garnish RH Resin
*7 Roof Inner Rack Board Front Resin
*8 RH Visor Assembly Resin + Skin (PVC)
*9 Map Light Sub-assembly Resin
*10 Pillar Assist Grip Assembly Resin
*11 Front Pillar Garnish RH Resin
*12 Front Armrest Base Panel Upper RH Resin



·

High Roof Models / Commuter / GL Grade

-

Window frames, which are designed based on high-speed rail trains, and ornamentation molding are used, providing a high-quality and relaxing atmosphere.

Distinctive External Appearance (The illustration shown is an example only.)
V123162C01
1.75,4.083 1.75,3.083 true 2.583,4.083 2.583,3 true 4.583,4.083 4.583,3.25 true 6.083,4.083 6.083,3.083 true 3.833,1.667 3.833,0.417 true 2.417,2.667 2.417,0.833 true 1.75,2 1.75,0.417 true 1.5,2.083 1.5,0.417 true 1.25,2 1.25,0.417 true 0.75,2.333 1.417,2.333 true 0.417,2.5 1.167,2.5 true 0.75,2.75 1.417,2.75 true 2.083,2.75 2.083,2.583 true 1.917,4.333 1.917,3.167 true 1.917,2.833 1.917,2.583 true 3.333,2.917 3.333,2.583 true 3.333,4.083 3.333,3.167 true 3.083,2.771 3.083,2.583 true 2.75,2.354 2.75,2.167 true 4.583,2.885 4.583,2.583 true 4.333,2.75 4.333,2.583 true 5,4.083 5,2.917 true 1.667,2.75 1.667,2.583 true 3.427,2.073 3.427,0.823 true 4.198,2.083 4.198,0.833 true 2.583,1.667 2.583,0.417 true 3.667,4.083 3.667,2.75 true 2,2.417 2.313,2.573 0.313,0.156 10 false *1 1.688,4.094 2,4.25 0.313,0.156 10 false *2 1.854,4.344 2.167,4.5 0.313,0.156 10 false *3 1.833,2.427 2.146,2.583 0.313,0.156 10 false *4 0.604,2.677 0.833,2.844 0.229,0.167 10 false *5 3.271,2.427 3.583,2.583 0.313,0.156 10 false *6 3.271,4.094 3.583,4.25 0.313,0.156 10 false *7 2.521,4.094 2.833,4.25 0.313,0.156 10 false *8 3.021,2.417 3.333,2.573 0.313,0.156 10 false *9 2.667,2.365 2.917,2.521 0.25,0.156 10 false *10 4.448,2.417 4.667,2.583 0.219,0.167 10 false *11 4.5,4.083 4.75,4.24 0.25,0.156 10 false *12 4.198,2.417 4.417,2.573 0.219,0.156 10 false *13 4.917,4.083 5.167,4.24 0.25,0.156 10 false *14 1.552,2.427 1.802,2.583 0.25,0.156 10 false *15 0.188,2.427 0.438,2.583 0.25,0.156 10 false *16 3.333,0.677 3.583,0.833 0.25,0.156 10 false *17 0.531,2.26 0.781,2.417 0.25,0.156 10 false *18 4.083,0.677 4.333,0.833 0.25,0.156 10 false *17 6,4.094 6.25,4.25 0.25,0.156 10 false *26 3.75,0.25 4,0.406 0.25,0.156 10 false *23 2.5,0.25 2.75,0.406 0.25,0.156 10 false *22 2.333,0.667 2.583,0.823 0.25,0.156 10 false *19 1.667,0.25 1.917,0.406 0.25,0.156 10 false *21 1.417,0.25 1.667,0.406 0.25,0.156 10 false *24 1.167,0.25 1.417,0.406 0.25,0.156 10 false *25 3.583,4.104 3.833,4.26 0.25,0.156 10 false *20

No. Parts Materials
*1 Front Door Trim Board Sub-assembly RH Upper Board Resin
*2 Lower Board Resin
*3 Pocket Resin
*4 Pull Handle Resin
*5 Upper Garnish Resin
*6 Roof Headlining Assembly Rear Upper Board Resin
*7 Lower Board Resin
*8 Pocket Resin
*9 Decorative Molding Film (Silver)
*10 Slide Door Trim Cover UPR LH Garnish Resin
*11 Quarter Trim Panel Assembly RH Upper Board Resin
*12 Lower Board Resin
*13 Decorative Molding Film (Silver)
*14 Pocket Resin
*15 Front Armrest Base Panel Upper RH Paint (Black)
*16 Front Pillar Garnish RH Resin
*17 Room Light Assembly No. 1 Resin
*18 Pillar Assist Grip Assembly (Front Door) Resin
*19 Pillar Assist Grip Assembly (Slide Door) Resin
*20 Pillar Assist Grip Assembly (Quarter Pillar Garnish) Resin
*21 Roof Inner Rack Board Front Resin
*22 Roof No. 1 Headlining Non-woven Fabric
*23 Roof Headlining Assembly Rear Non-woven Fabric
*24 RH Visor Assembly Resin + Skin (PVC)
*25 Map Light Sub-assembly Resin
*26 Back Door Trim Board Polyethylene Terephthalate (PET), Polypropylene (PP)





b.

Instrument Panel

i.

The following types of instrument panels are provided depending on the model.

Models without Console (The illustration shown is an example only.)
V123163

Models with Console Tray (The illustration shown is an example only.)
V123612

Models with Console Box (The illustration shown is an example only.)
V123164


ii.

The center of the instrument panel is specially designed in consideration of the center passenger's legs and feet for models with a 3-person front seat.

Specially-designed Instrument Panel Center (The illustration shown is an example only.)
V123165C01
4.25,3.917 4.667,4.333 4.667,4.333 4.75,4.333 true 3.5,1.667 3.917,1.25 3.917,1.25 4,1.25 true 4.031,1.156 4.344,1.313 0.313,0.156 10 false *a 4.792,4.25 5.104,4.406 0.313,0.156 10 false *b
*a Specially-designed Instrument Panel Center *b Center Passenger




c.

Steering

i.

A 3-spoke steering wheel is used.

Steering (The illustration shown is an example only.)
V123166



d.

Shift Lever Knob Sub-assembly

i.

The following types of ornamentation are provided for the shift knob depending on the model.

Models with Manual Transmission (The illustration shown is an example only.)
V123167C01
4.75,1.5 5.167,1.917 5.167,1.917 5.25,1.917 true 4.417,1.667 4.833,2.083 4.833,2.083 4.917,2.083 true 4.667,1.167 5.083,0.75 5.083,0.75 5.167,0.75 true 5.208,0.667 5.521,0.823 0.313,0.156 10 false *a 5.292,1.823 5.604,1.979 0.313,0.156 10 false *b 4.958,2 5.271,2.156 0.313,0.156 10 false *c

No. Parts DX GL
*a Top Black (PVC) Silver Paint (ABS)
*b Panel Black (PVC) Satin Plating
*c Side Black (PVC) Orchid Brown (PVC)

Models with Automatic Transmission (The illustration shown is an example only.)
V123613C01
4.177,0.948 4.594,1.365 4.594,1.365 4.677,1.365 true 4.135,0.594 4.552,0.177 4.552,0.177 4.635,0.177 true 2.917,0.833 3,0.833 3,0.833 3.417,1.25 true 3,0.25 3.083,0.25 3.083,0.25 3.5,0.667 true 4.667,0.094 4.979,0.25 0.313,0.156 10 false *a 4.719,1.271 5.031,1.427 0.313,0.156 10 false *b 2.854,0.156 3.01,0.313 0.156,0.156 10 false *c 2.76,0.75 2.917,0.906 0.156,0.156 10 false *d

No. Parts DX GL
*a Top Black (PVC) Orchid Brown (PVC)
*b Panel Black (PVC) Satin Plating
*c Side Black (ABS) Black (ABS)
*d Shift Lever Knob Cover No. 1 Black (ABS) Satin Plating



e.

Door Area

i.

A pillar assist grip assembly is used for the front pillar garnish assembly, achieving superior accessibility from the front door.

Pillar Assist Grip Assembly (The illustration shown is an example only.)
V123169C01
2.083,2.5 0.917,1.333 0.917,1.333 0.833,1.333 true 3.417,1.667 2,0.25 2,0.25 1.917,0.25 true 1.771,0.156 2.083,0.313 0.313,0.156 10 false *1 0.677,1.25 0.99,1.406 0.313,0.156 10 false *2
*1 Pillar Assist Grip Assembly *2 Front Pillar Garnish RH



ii.

Depending on the model, a pillar assist grip assembly is used for the center pillar garnish lower at the front of the sliding door opening, achieving superior accessibility from the sliding door.

Pillar Assist Grip Assembly (The illustration shown is an example only.)
V123170C01
3.75,1.833 4.75,0.833 4.75,0.833 4.833,0.833 true 3.583,2.583 4.25,3.25 4.25,3.25 4.333,3.25 true 4.875,0.74 5.188,0.896 0.313,0.156 10 false *1 4.385,3.177 4.698,3.333 0.313,0.156 10 false *2
*1 Pillar Assist Grip Assembly *2 Center Pillar Garnish Lower RH



iii.

Depending on the model, a pillar assist grip assembly is used, achieving superior accessibility from the sliding door.

V123171C01
3.063,1.76 2.646,1.344 2.646,1.344 2.563,1.344 true 3.917,2.083 5.333,3.417 5.333,3.417 5.417,3.417 true 2.417,1.271 2.729,1.427 0.313,0.156 10 false *1 5.469,3.333 5.781,3.49 0.313,0.156 10 false *2
*1 Pillar Assist Grip Assembly *2 Quarter Pillar Garnish RH



iv.

Depending on the model, a hand grip frame sub-assembly No. 1 is used, achieving superior accessibility from the sliding door.

V123614C01
2.833,1.417 2.417,1 2.417,1 2.333,1 true 2.177,0.927 2.344,1.094 0.167,0.167 10 false *1
*1 Hand Grip Frame Sub-assembly No. 1 - -



v.

An easy-to-grip cross sectional shape is used on the pull handle portion of the front door trim board sub-assembly to achieve a soft grip feeling.

Pull Handle (The illustration shown is an example only.)
V123172C01
2.167,1.333 2.667,0.833 2.667,0.833 2.75,0.833 true 4.917,1.667 4.5,1.25 4.5,1.25 4.417,1.25 true 2.771,0.76 3.083,0.917 0.313,0.156 10 false *1 1.896,0.938 2.052,1.094 0.156,0.156 10 false A 5.188,3.469 5.5,3.625 0.313,0.156 10 false *a 4.26,1.177 4.573,1.333 0.313,0.156 10 false *b 1.896,2.49 2.052,2.646 0.156,0.156 10 false A
*1 Front Door Trim Board Sub-assembly RH - -
*a A - A Cross Section *b Pull Handle




f.

Rear Trim Area

i.

Depending on the model, ornaments covered with a film that looks like satin silver plating are used as interior accents to express a unified sense of luxury from the front to the rear. Also, the ends of the ornaments are positioned so that they enter the ornament trim (*c in illustration), achieving a design that makes them appear to naturally disappear into the trim.

Ornament (The illustration shown is an example only.)
V123173C01
2.25,1.75 2.667,1.333 2.667,1.333 2.75,1.333 true 5.083,1.75 5.5,1.333 5.5,1.333 5.583,1.333 true 1.083,4.333 0.667,4.75 0.667,4.75 0.583,4.75 true 5.75,4.5 6.167,4.917 6.167,4.917 6.333,4.917 true 3.615,4.979 4.031,5.396 4.031,5.396 4.198,5.396 true 2.781,1.25 3.094,1.406 0.313,0.156 10 false *1 5.625,1.25 5.938,1.406 0.313,0.156 10 false *3 1.854,1.708 2.01,1.865 0.156,0.156 10 false A 1.854,2.042 2.01,2.198 0.156,0.156 10 false A 4.229,5.313 4.542,5.469 0.313,0.156 10 false *2 6.354,4.823 6.667,4.979 0.313,0.156 10 false *2 2.927,1.76 3.083,1.917 0.156,0.156 10 false B 3.667,1.75 3.823,1.906 0.156,0.156 10 false B 4.604,1.708 4.76,1.865 0.156,0.156 10 false A 4.604,2.042 4.76,2.198 0.156,0.156 10 false A 6.052,2.01 6.208,2.167 0.156,0.156 10 false C 6.615,1.469 6.771,1.625 0.156,0.156 10 false C 0.438,4.667 0.75,4.823 0.313,0.156 10 false *2 1.021,5.26 1.333,5.417 0.313,0.156 10 false *a 3.5,5.5 3.813,5.656 0.313,0.156 10 false *b 5.771,5.26 6.083,5.417 0.313,0.156 10 false *c
*1 Slide Door Trim Board Assembly RH *2 Ornament
*3 Quarter Trim Board Assembly RR - -
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section - -



ii.

On the standard roof model, the body pillar trim and window frame are designed to resemble those of an airplane or high-speed rail train. Also, the amount of interior space occupied by the roof headlining is decreased, ensuring sufficient interior space.

Sufficient Interior Space (The illustration shown is an example only.)
V123174C01
2,5.083 2.083,5.083 2.083,5.083 3,4.167 true 3.396,5.438 3.708,5.594 0.313,0.156 10 false *a 1.844,5 2.156,5.156 0.313,0.156 10 false *b 4.958,0.604 5.094,0.771 0.135,0.167 10 false A 4.948,1.188 5.083,1.354 0.135,0.167 10 false A
*a A - A Cross Section *b Extend Area




g.

Illumination

i.

For the DX grade, bulbs are used for all interior illumination (except for some models). For the GL grade, LEDs are used for all interior illumination to express a sense of luxury.

Standard Roof Models / Van /DX Grade (DX Grade (Half Panel Van)) (Bulb Type) (The illustration shown is an example only.)
V123615C01
1.885,1.625 2.552,0.958 2.552,0.958 2.635,0.958 true 5.344,1.521 6.01,0.854 6.01,0.854 6.094,0.854 true 1.646,4.281 1.729,4.281 1.729,4.281 2.396,3.615 true 3.833,1.49 4.5,0.823 4.5,0.823 4.583,0.823 true 2.677,0.875 2.99,1.031 0.313,0.156 10 false *1 4.625,0.74 4.938,0.896 0.313,0.156 10 false *2 6.125,0.771 6.438,0.927 0.313,0.156 10 false *2 1.49,4.198 1.667,4.354 0.177,0.156 10 false *3
*1 Map Light Sub-assembly *2 No. 1 Room Light Assembly
*3 Slide Door Step Light (Half Panel Van Only) - -


Standard Roof Models / Commuter / DX Grade (Bulb Type) (The illustration shown is an example only.)
V123616C01
1.917,1.604 2.583,0.938 2.583,0.938 2.667,0.938 true 5.344,1.521 6.01,0.854 6.01,0.854 6.094,0.854 true 1.646,4.281 1.729,4.281 1.729,4.281 2.396,3.615 true 3.833,1.51 4.5,0.844 4.5,0.844 4.583,0.844 true 2.708,0.854 3.021,1.01 0.313,0.156 10 false *1 4.625,0.76 4.938,0.917 0.313,0.156 10 false *2 6.125,0.771 6.438,0.927 0.313,0.156 10 false *2 1.49,4.198 1.667,4.354 0.177,0.156 10 false *3
*1 Map Light Sub-assembly *2 No. 1 Room Light Assembly
*3 Slide Door Step Light - -


Standard Roof Models / Commuter / GL Grade (LED Type) (The illustration shown is an example only.)
V123617C01
1.917,1.604 2.583,0.938 2.583,0.938 2.667,0.938 true 5.344,1.521 6.01,0.854 6.01,0.854 6.094,0.854 true 2.354,4.146 2.438,4.146 2.438,4.146 3.104,3.479 true 3.833,1.51 4.5,0.844 4.5,0.844 4.583,0.844 true 2.708,0.854 3.021,1.01 0.313,0.156 10 false *1 4.625,0.76 4.938,0.917 0.313,0.156 10 false *2 6.125,0.771 6.438,0.927 0.313,0.156 10 false *2 2.208,4.063 2.385,4.219 0.177,0.156 10 false *3
*1 Map Light Sub-assembly *2 No. 1 Room Light Assembly
*3 Slide Door Scuff Illumination Light - -


High Roof Models / Van / DX Grade (Bulb Type) (The illustration shown is an example only.)
V123175C01
2.865,1.333 3.531,0.667 3.531,0.667 3.615,0.667 true 4.708,1.344 5.375,0.677 5.375,0.677 5.458,0.677 true 0.5,2.5 0.583,2.5 0.583,2.5 1.25,1.833 true 0.344,2.406 0.656,2.563 0.313,0.156 10 false *1 3.656,0.583 3.969,0.74 0.313,0.156 10 false *2 5.5,0.594 5.813,0.75 0.313,0.156 10 false *2
*1 Map Light Sub-assembly *2 No. 1 Room Light Assembly


High Roof Models / Commuter / DX Grade (Bulb Type) (The illustration shown is an example only.)
V123618C01
1.688,1.854 2.771,0.771 2.771,0.771 2.854,0.771 true 4.948,1.479 5.615,0.813 5.615,0.813 5.698,0.813 true 1.365,4.271 1.448,4.271 1.448,4.271 2.115,3.604 true 3.188,1.458 3.854,0.792 3.854,0.792 3.938,0.792 true 2.896,0.688 3.208,0.844 0.313,0.156 10 false *1 3.979,0.708 4.292,0.865 0.313,0.156 10 false *2 5.75,0.729 6.063,0.885 0.313,0.156 10 false *2 1.208,4.177 1.385,4.333 0.177,0.156 10 false *3
*1 Map Light Sub-assembly *2 No. 1 Room Light Assembly
*3 Slide Door Step Light - -


High Roof Models / Commuter / GL Grade (LED Type) (The illustration shown is an example only.)
V123176C01
3.167,1.417 3.833,0.75 3.833,0.75 3.917,0.75 true 4,1.417 4.667,0.75 4.667,0.75 4.75,0.75 true 4.938,1.417 5.604,0.75 5.604,0.75 5.688,0.75 true 0.833,2.5 0.917,2.5 0.917,2.5 1.583,1.833 true 2.167,4.167 2.25,4.167 2.25,4.167 2.917,3.5 true 3.354,2.188 3.438,2.188 3.438,2.188 3.688,1.938 true 4.792,2.188 4.708,2.188 4.708,2.188 4.458,1.938 true 0.688,2.427 1,2.583 0.313,0.156 10 false *1 3.208,2.115 3.521,2.271 0.313,0.156 10 false *3 4.833,2.104 5.146,2.26 0.313,0.156 10 false *3 5.719,0.677 6.031,0.833 0.313,0.156 10 false *2 4.792,0.667 5.104,0.823 0.313,0.156 10 false *2 3.948,0.656 4.26,0.813 0.313,0.156 10 false *2 2.01,4.094 2.323,4.25 0.313,0.156 10 false *4
*1 Map Light Sub-assembly *2 No. 1 Room Light Assembly
*3 Spot Light Assembly *4 Slide Door Scuff Illumination Light


Map Light Sub-assembly (Bulb Type) (The illustration shown is an example only.)
V123177

Map Light Sub-assembly (LED Type) (The illustration shown is an example only.)
V123178

No. 1 Room Light Assembly (Bulb Type) (The illustration shown is an example only.)
V123179

No. 1 Room Light Assembly (LED Type) (The illustration shown is an example only.)
V123180

Step Light (Bulb Type) (The illustration shown is an example only.)
V123181C01
4.667,1.083 5.5,0.25 5.5,0.25 5.583,0.25 true 3.833,1.5 5,2.667 5,2.667 5.083,2.667 true 5.125,2.604 5.438,2.76 0.313,0.156 10 false *1 5.625,0.188 5.938,0.344 0.313,0.156 10 false *2
*1 Rear Door Scuff Plate RH *2 Slide Door Step Light (No. 2 Room Light Assembly)


Sliding Door Scuff Illumination (LED Type) (The illustration shown is an example only.)
V123182C01
3.656,1.188 4.74,0.104 4.74,0.104 4.823,0.104 true 3.833,1.521 5,2.688 5,2.688 5.083,2.688 true 5.125,2.604 5.438,2.76 0.313,0.156 10 false *1 4.854,0.021 5.167,0.177 0.313,0.156 10 false *2
*1 Rear Door Scuff Plate RH *2 Slide Door Scuff Illumination Light (No. 1 Interior Illumination Light Assembly)



ii.

Reading Light (High Roof Models / GL Grade)

·

Nighttime illumination is provided for the symbol mark of the switch knob, achieving superior visibility at night and in dark environments. A high intensity LED is used as a light source.

Reading Light (The illustration shown is an example only.)
V123183C01
3,0.781 3.25,0.25 3.25,0.25 3.167,0.813 true 3.948,0.844 4.083,0.333 4.083,0.333 4.083,0.865 true 4.667,0.938 4.76,0.365 4.76,0.365 4.781,0.948 true 5.083,2.917 5.833,2.167 5.833,2.167 5.917,2.167 true 5.417,3.75 5.5,3.75 5.5,3.75 6.083,3.167 true 2.281,3.625 1.333,3 1.333,3 1.333,3.667 true 3.188,0.104 3.5,0.26 0.313,0.156 10 false *1 5.948,2.094 6.125,2.26 0.177,0.167 10 true *2 5.25,3.667 5.406,3.823 0.156,0.156 10 true *3 4.021,0.167 4.333,0.323 0.313,0.156 10 false *1 4.688,0.188 5,0.344 0.313,0.156 10 false *1 1.229,2.833 1.542,2.99 0.313,0.156 10 false *1
*1 Spot Light Assembly *2 Clear Lens (Spot Light Lens)
*3 Spot Light Switch (with Nighttime Illumination) - -





h.

Storage

i.

Overhead Tray

·

On high roof models, an overhead tray (roof inner rack board front), which can accommodate A4-sized documents and long objects, is provided above the front seats.

Overhead Tray (The illustration shown is an example only.)
V123195C01
5.25,1.833 6.083,2.667 6.083,2.667 6.167,2.667 true 3.083,4.417 3.917,5.25 3.917,5.25 4,5.25 true 1.583,4.75 2.417,5.583 2.417,5.583 2.5,5.583 true 4.667,6.333 5.5,7.167 5.5,7.167 5.583,7.167 true 6.208,2.583 6.521,2.74 0.313,0.156 10 false *1 2.531,5.49 2.844,5.646 0.313,0.156 10 false *a 5.625,7.073 5.938,7.229 0.313,0.156 10 false *b 4.042,5.146 4.354,5.302 0.313,0.156 10 false *a
*1 Roof Inner Rack Board Front - -
*a A4 File, A4 Map, Binder, etc. (One side can store up to 2 kg) *b Long Object




ii.

Accessories Case (Overhead Console)

·

A small storage space for the overhead console (map light sub-assembly) that can store small objects such as cards and keys is provided at the front edge of the roof.

Accessories Case (The illustration shown is an example only.)
V123196C01
4.167,1.417 4.917,0.667 4.917,0.667 5,0.667 true 4.083,2.5 4.5,2.917 4.5,2.917 4.583,2.917 true 5.042,0.573 5.354,0.729 0.313,0.156 10 false *1 4.625,2.833 4.938,2.99 0.313,0.156 10 false *a
*1 Map Light Sub-assembly - -
*a Accessories Case - -




iii.

Ticket Holder (Driver Side Visor Assembly)

·

A convenient ticket holder that can store tickets, etc., is provided for the driver side visor assembly.

Ticket Holder (The illustration shown is an example only.)
V123197C01
4.917,1.667 6.167,0.417 6.167,0.417 6.25,0.417 true 3.25,2.417 3.333,2.417 3.333,2.417 4,1.75 true 6.302,0.333 6.615,0.49 0.313,0.156 10 false *1 3.094,2.313 3.406,2.469 0.313,0.156 10 false *a
*1 Visor Assembly - -
*a Ticket Holder - -




iv.

Glove Box

·

The open lever (glove compartment door lock sub-assembly) of the instrument panel assembly lower No. 2 is designed to open to the side, ensuring driver operability.

·

The instrument panel assembly lower No. 2 is designed with a low bottom, making it possible to store items such as notebook computers*.

HINT:

*: Certain items may not be able to be stored depending on its size and shape.


Glove Box (The illustration shown is an example only.)
V123184C01
1,0.75 1.417,0.333 1.417,0.333 1.5,0.333 true 3.25,0.906 3.667,0.49 3.667,0.49 3.75,0.49 true 2.083,2.917 3,3.833 3,3.833 3.083,3.833 true 1.781,5.021 2.198,4.604 2.198,4.604 2.281,4.604 true 1.677,4.792 2.094,4.375 2.094,4.375 2.177,4.375 true 3.125,3.76 3.438,3.917 0.313,0.156 10 false *1 1.521,0.25 1.667,0.417 0.146,0.167 10 true *2 1.771,6.594 2.083,6.75 0.313,0.156 10 false *a 5.167,6.583 5.479,6.74 0.313,0.156 10 false *b 2.313,4.51 2.625,4.667 0.313,0.156 10 false *c 2.208,4.281 2.521,4.438 0.313,0.156 10 false *d 3.792,0.406 3.938,0.563 0.146,0.156 10 true *e 2.115,0.833 2.427,0.99 0.313,0.156 10 false *f 3.458,2.99 3.771,3.146 0.313,0.156 10 false *f 1.479,2.281 1.604,2.458 0.125,0.177 10 false A 1.479,3.542 1.604,3.719 0.125,0.177 10 false A 5.073,2.292 5.198,2.469 0.125,0.177 10 false B 5.073,3.542 5.198,3.719 0.125,0.177 10 false B
*1 Instrument Panel Assembly Lower No. 2 *2 Glove Compartment Door Lock Sub-assembly
*a A - A Cross Section *b B - B Cross Section
*c Owner's Manual *d Notebook Computer
*e Pull Lever to Unlock *f Open




v.

Glove Box Card Holder

·

A card holder is provided on the backside of the glove box door (instrument panel assembly lower No. 2).

Glove Box Card Holder (The illustration shown is an example only.)
V123188C01
4.5,2.25 5.167,2.917 5.167,2.917 5.25,2.917 true 3.583,2.667 4.25,3.333 4.25,3.333 4.333,3.333 true 4.385,3.24 4.698,3.396 0.313,0.156 10 false *1 5.281,2.813 5.594,2.969 0.313,0.156 10 false *a
*1 Instrument Panel Assembly Lower No. 2 - -
*a Card Holder - -




vi.

Driver Seat and Passenger Seat Cup Holders

·

The driver seat and passenger seat cup holders are designed with square bottoms so that they can also be used to easily store objects other than cups.

Driver Seat and Passenger Seat Cup Holders (The illustration shown is an example only.)
V123185C01
1.563,4.573 0.646,5.49 0.646,5.49 0.563,5.49 true 5.583,4.5 6.583,5.5 6.583,5.5 6.667,5.5 true 1.417,1.75 0.333,2.833 0.333,2.833 0.25,2.833 true 6.083,1.583 6.833,2.333 6.833,2.333 6.917,2.333 true 0.104,2.75 0.417,2.906 0.313,0.156 10 false *1 6.958,2.25 7.104,2.406 0.146,0.156 10 false *2 1.688,5.5 2,5.656 0.313,0.156 10 false *a 5.521,5.51 5.833,5.667 0.313,0.156 10 false *b 0.396,5.396 0.708,5.552 0.313,0.156 10 false *c 1.292,0.26 1.448,0.417 0.156,0.156 10 false A 6.021,0.26 6.177,0.417 0.156,0.156 10 false B 6.719,5.396 7.031,5.552 0.313,0.156 10 false *c
*1 Driver Seat Cup Holder (Instrument Panel Garnish Sub-assembly No. 1) *2 Passenger Seat Cup Holder (Instrument Panel Garnish Sub-assembly No. 2)
*a A View *b B View
*c Square Bottom - -




vii.

Center Seat Cup Holder

·

The center seat cup holder is designed so that it can also be used as a small storage space.

Center Seat Cup Holder (The illustration shown is an example only.)
V123186C01
4,2.583 6,0.583 6,0.583 6.083,0.583 true 3.167,1.219 4.25,0.135 4.25,0.135 4.333,0.135 true 4.385,0.073 4.698,0.229 0.313,0.156 10 false *1 6.125,0.51 6.438,0.667 0.313,0.156 10 false *2
*1 Accessory Socket *2 Center Seat Cup Holder (Instrument Panel Cup Holder Assembly)




viii.

Instrument Panel Center Small Storage Space

·

A small storage space is provided in the center of the instrument panel within reach of the driver in consideration of usability.

DX Grade (The illustration shown is an example only.)
V123187C01
3.583,2.167 5.083,3.667 5.083,3.667 5.167,3.667 true 5.208,3.583 5.521,3.74 0.313,0.156 10 false *1
*1 Instrument Panel Center Small Storage Space (Spare Switch Hole Cover) - -


GL Grade (The illustration shown is an example only.)
V123189C01
2.083,1.75 3.25,0.583 3.25,0.583 3.333,0.583 true 1.854,2.521 2.771,3.438 2.771,3.438 2.854,3.438 true 5.667,2.333 6.75,3.417 6.75,3.417 6.833,3.417 true 3.365,0.5 3.677,0.656 0.313,0.156 10 false *1 1.917,3.5 2.229,3.656 0.313,0.156 10 false *a 5.438,3.51 5.75,3.667 0.313,0.156 10 false *b 2.885,3.344 3.198,3.5 0.313,0.156 10 false *c 6.854,3.323 7.031,3.49 0.177,0.167 10 false *d
*1 Instrument Panel Center Small Storage Space (Instrument Panel Box Sub-assembly Center) - -
*a Closed *b Open
*c Push *d Open Automatically




ix.

Card Holder

·

Depending on the model, a card holder is provided in the center of the instrument panel within reach of the driver in consideration of usability.

Card Holder (The illustration shown is an example only.)
V123625C01
3.615,2.094 5.115,3.594 5.115,3.594 5.198,3.594 true 5.25,3.5 5.563,3.656 0.313,0.156 10 false *1
*1 Card Holder (Instrument Panel Under Cover No. 3) - -




x.

Console Box Assembly (Models with Console Tray )

·

A detachable divider (console box plate) is provided for the console box assembly. The divider (console box plate) can be removed or installed depending on the stored object, increasing the functionality of the tray.

·

A small tray is provided at the rear of the console box assembly. Small items that may spread throughout the main tray can be stored in the small tray.

Console Box Assembly (The illustration shown is an example only.)
V123190C01
4.25,0.75 4.667,0.333 4.667,0.333 4.75,0.333 true 3.75,1.583 4.167,1.167 4.167,1.167 4.25,1.167 true 4.667,2.25 5.083,1.833 5.083,1.833 5.167,1.833 true 1.75,3.167 1.833,3.167 1.833,3.167 3.167,1.833 true 2.75,4 2.833,4 2.833,4 4.167,2.667 true 5.25,2.75 6.083,1.917 6.083,1.917 6.167,1.917 true 5.198,1.75 5.51,1.906 0.313,0.156 10 false *1 4.771,0.25 5.083,0.406 0.313,0.156 10 false *2 4.281,1.073 4.594,1.229 0.313,0.156 10 false *a 2.573,3.917 2.719,4.063 0.146,0.146 10 false *b 6.198,1.823 6.51,1.979 0.313,0.156 10 false *c 1.583,3.083 1.729,3.229 0.146,0.146 10 false *b
*1 Console Box Assembly *2 Console Box Plate
*a Pull Up and Out *b Main Tray
*c Rear Tray - -




xi.

Console Compartment Box Assembly (Models with Console Box)

·

A console compartment box assembly with a rotating door is provided. A tray, upon which objects such as tablets or binders can be placed, is provided on top of the door in consideration of usability.

·

Opening operation: Pull the lever. Once the door automatically pops up, manually open the console compartment box assembly.

Console Compartment Box Assembly (The illustration shown is an example only.)
V123191C01
1.5,0.75 1.083,0.333 1.083,0.333 1,0.333 false 1.75,1.083 0.917,1.917 0.917,1.917 0.833,1.917 true 4.25,1.448 4,1.198 4,1.198 3.917,1.198 true 2.146,3.667 1.729,3.25 1.729,3.25 1.646,3.25 true 1.76,4.354 1.344,3.938 1.344,3.938 1.26,3.938 true 1.667,6.667 1.25,6.25 1.25,6.25 1.167,6.25 true 5.198,7.427 4.531,6.76 4.531,6.76 4.448,6.76 true 0.854,0.24 1.042,0.396 0.188,0.156 10 false *1 0.688,1.823 0.865,1.99 0.177,0.167 10 false *2 1.719,8.604 2.031,8.76 0.313,0.156 10 false *a 5.188,8.573 5.5,8.729 0.313,0.156 10 false *b 1.115,3.844 1.281,4.021 0.167,0.177 10 false *c 1.5,3.167 1.667,3.333 0.167,0.167 10 false *d 1.021,6.146 1.177,6.313 0.156,0.167 10 false *e 4.333,6.677 4.479,6.833 0.146,0.156 10 false *f 3.771,1.104 3.948,1.271 0.177,0.167 10 false *2
*1 Console Compartment Box Assembly *2 Lever
*a Closed *b Open
*c Pop-up (Automatic Open) *d Manual Open
*e Tablet Computer *f 600 mL Plastic Bottle Storage Example



·

A divider (instrument panel cup holder support No. 1) is provided for the small storage space at the rear of the console box. The divider can be removed and repositioned, making it possible to store more types of objects. The divider is repositioned by aligning one of the grooves on the divider with the protrusion in the console box rear small storage space. Also, by removing the divider, devices such as tablets can be propped up.

Console Box Rear Small Storage Space (The illustration shown is an example only.)
V123192C01
1.667,1.333 1.958,1 true 2.104,1.052 1.667,1.333 1.667,1.333 1.792,0.99 true 3.5,1.333 3.25,1.083 true 3.417,1 3.5,1.333 3.5,1.333 3.042,1.156 true 5.677,2.719 6,1.75 6,1.75 5.823,2.625 true 1.25,1.917 0.833,1.5 0.833,1.5 0.75,1.5 true 3.417,3.5 3.333,3.5 3.333,3.5 2.667,2.833 true 5.333,6.083 5.25,6.083 5.25,6.083 4.75,6.583 true 0.583,1.417 0.896,1.573 0.313,0.156 10 false *1 1.521,0.177 1.833,0.333 0.313,0.156 10 false *2 2.771,2.063 3.083,2.219 0.313,0.156 10 false *a 1.552,1.313 1.865,1.469 0.313,0.156 10 false *b 5.969,1.594 6.281,1.75 0.313,0.156 10 false *c 1.167,5.51 1.479,5.667 0.313,0.156 10 false *d 3.438,5.5 3.75,5.656 0.313,0.156 10 false *e 5.833,5.51 6.146,5.667 0.313,0.156 10 false *f 5.365,5.958 5.594,6.167 0.229,0.208 10 false *g 3.438,3.417 3.75,3.573 0.313,0.156 10 false *h 3.521,1.313 3.833,1.469 0.313,0.156 10 false *b
*1 Console Compartment Box Assembly *2 Instrument Panel Cup Holder Support No. 1
*a Pull Up and Out *b Groove
*c Protrusion *d Right Position
*e Center Position *f Left Position
*g Tablet Computer *h Console Box Rear Small Storage Space



·

A convenient removable tray (console box pocket), which can store small objects such as smartphones, is provided in the console compartment box assembly. The tray can be aligned with the protrusions inside the box and slid along the rail to change its position.

Removable Tray (The illustration shown is an example only.)
V123193C01
1.417,2.417 1,2 1,2 0.917,2 true 1.667,2.115 1.25,1.698 1.25,1.698 1.167,1.698 true 1.979,1.323 1.563,0.906 1.563,0.906 1.479,0.906 true 5.333,1.667 4.917,1.25 4.917,1.25 4.833,1.25 true 1.333,0.813 1.625,0.979 0.292,0.167 10 false *1 4.688,1.156 5,1.313 0.313,0.156 10 false *2 0.771,1.906 1.083,2.063 0.313,0.156 10 false *a 1.01,1.604 1.323,1.76 0.313,0.156 10 false *b
*1 Console Compartment Box Assembly *2 Console Box Pocket
*a Rail *b Protrusion



·

A binder rack (trash box retainer support No. 1 and console box hole cover) is provided in front of the console compartment box assembly. Objects such as binders and tablets can be inserted and stored.

Binder Rack (The illustration shown is an example only.)
V123194C01
1.75,2.25 1.833,2.25 1.833,2.25 2.417,1.667 true 1.854,3.51 1.938,3.51 1.938,3.51 2.938,2.51 true 5.167,0.917 5.75,0.333 5.75,0.333 5.833,0.333 true 1.49,3.427 1.896,3.615 0.406,0.188 10 false *1, *2 5.865,0.25 6.177,0.406 0.313,0.156 10 false *3 1.583,2.156 1.896,2.313 0.313,0.156 10 false *a
*1 Trash Box Retainer Support No. 1 *2 Console Box Hole Cover
*3 Console Compartment Box Assembly - -
*a Binder, etc. - -




xii.

Bottle Holder and Pocket (Front Door)

·

A space for storing A4-sized documents is provided in the door pocket in consideration of usability.*

·

The bottle holder can store large plastic bottles in consideration of usability.*

HINT:

*: Certain items may not be able to be stored depending on its size and shape.


Bottle Holder and Pocket (The illustration shown is an example only.)
V123198C01
2.25,2.667 2.667,3.083 2.667,3.083 2.75,3.083 true 3.5,1.167 3.583,1.167 3.583,1.167 4,1.583 true 3.49,3.25 3.573,3.25 3.573,3.25 3.99,2.833 true 5.396,1.5 5.479,1.5 5.479,1.5 5.896,1.917 true 5.323,3.5 5.406,3.5 5.406,3.5 5.823,3.083 true 2.781,2.99 3.094,3.146 0.313,0.156 10 false *1 1.656,1.885 1.771,2.042 0.115,0.156 10 false A 4.5,3.615 4.813,3.771 0.313,0.156 10 false *a 6.156,3.5 6.469,3.656 0.313,0.156 10 false *b 3.354,3.156 3.667,3.313 0.313,0.156 10 false *c 5.167,3.406 5.479,3.563 0.313,0.156 10 false *d 3.344,1.083 3.656,1.24 0.313,0.156 10 false *e 5.271,1.417 5.583,1.573 0.313,0.156 10 false *f 1.656,2.781 1.771,2.938 0.115,0.156 10 false A 2.063,1.917 2.177,2.073 0.115,0.156 10 false B 2.073,2.792 2.188,2.948 0.115,0.156 10 false B
*1 Front Door Trim Board Sub-assembly RH - -
*a A- A Cross Section *b B- B Cross Section
*c Bottle Holder *d Door Pocket
*e Plastic Bottle, etc. *f A4-sized File, etc.




xiii.

Bottle Holder (Rear Slide Door) (GL Grade)

·

The bottle holder can store plastic bottles in consideration of usability.*

HINT:

*: Certain items may not be able to be stored depending on its size and shape.


Bottle Holder (The illustration shown is an example only.)
V123199C01
3,2.583 3.75,1.833 3.75,1.833 3.833,1.833 true 5.083,1.417 4.667,1 4.667,1 4.583,1 true 5.083,2.75 4.667,3.167 4.667,3.167 4.583,3.167 true 3.875,1.75 4.188,1.906 0.313,0.156 10 false *1 1.323,1.833 1.448,2.01 0.125,0.177 10 false A 5.49,3.563 5.802,3.719 0.313,0.156 10 false *a 4.438,3.073 4.75,3.229 0.313,0.156 10 false *b 4.438,0.906 4.75,1.063 0.313,0.156 10 false *c 1.344,2.74 1.469,2.917 0.125,0.177 10 false A
*1 Slide Door Trim Board Assembly RH - -
*a A- A Cross Section *b Bottle Holder
*c Plastic Bottle, etc. - -




xiv.

Bottle Holder and Pocket (Side and Quarter Trim Board) (GL Grade)

·

A bottle holder and pocket, which can store plastic bottles and various types of items, are provided for the quarter trim board and side quarter trim board in consideration of usability.

HINT:

*: Certain items may not be able to be stored depending on its size and shape.


Bottle Holder and Pocket (The illustration shown is an example only.)
V123200C01
2.792,1.583 2.792,0.333 true 1.531,1.5 1.531,0.333 true 4.167,1.583 4.167,0.333 true 5.5,1.583 5.5,0.333 true 1.75,4 2.333,3.417 2.333,3.417 2.417,3.417 true 3.667,4.167 4.417,3.417 4.417,3.417 4.5,3.417 true 5.583,4.333 6.5,3.417 6.5,3.417 6.583,3.417 true 1.667,6.5 2.417,5.75 2.417,5.75 2.5,5.75 true 3.833,6.5 4.583,5.75 4.583,5.75 4.667,5.75 true 0.583,5.167 0.667,5.167 0.667,5.167 1.333,4.5 true 2.583,5.167 2.667,5.167 2.667,5.167 3.333,4.5 true 4.667,5.167 4.75,5.167 4.75,5.167 5.417,4.5 true 0.5,7.583 0.583,7.583 0.583,7.583 1.25,6.917 true 2.833,7.583 2.917,7.583 2.917,7.583 3.583,6.917 true 2.417,2.333 2.833,2.75 2.833,2.75 2.917,2.75 true 3.75,2.333 4.167,2.75 4.167,2.75 4.25,2.75 true 5.417,2.333 5.833,2.75 5.833,2.75 5.917,2.75 true 2.948,2.667 3.26,2.823 0.313,0.156 10 false *1 4.281,2.667 4.594,2.823 0.313,0.156 10 false *2 5.948,2.667 6.26,2.823 0.313,0.156 10 false *3 1.448,0.135 1.635,0.333 0.188,0.198 10 false (1) 0.427,5.073 0.604,5.25 0.177,0.177 10 false *a 2.448,3.333 2.76,3.49 0.313,0.156 10 false *b 4.531,3.323 4.844,3.479 0.313,0.156 10 false *c 2.729,0.135 2.917,0.333 0.188,0.198 10 false (2) 4.094,0.135 4.281,0.333 0.188,0.198 10 false (3) 5.427,0.135 5.615,0.333 0.188,0.198 10 false (4) 1.427,5.135 1.615,5.333 0.188,0.198 10 false (1) 3.479,5.135 3.667,5.333 0.188,0.198 10 false (2) 5.625,5.135 5.813,5.333 0.188,0.198 10 false (3) 1.438,7.552 1.625,7.75 0.188,0.198 10 false (4) 3.563,7.552 3.75,7.75 0.188,0.198 10 false (4) 6.615,3.323 6.927,3.479 0.313,0.156 10 false *c 2.427,5.073 2.604,5.25 0.177,0.177 10 false *a 4.521,5.073 4.698,5.25 0.177,0.177 10 false *a 2.688,7.49 2.865,7.667 0.177,0.177 10 false *a 0.354,7.479 0.531,7.656 0.177,0.177 10 false *a 2.531,5.667 2.844,5.823 0.313,0.156 10 false *b 4.698,5.677 5.01,5.833 0.313,0.156 10 false *c
*1 Quarter Trim Panel Assembly RH *2 Side Trim Board Assembly
*3 Quarter Trim Board Assembly RR - -
*a Bottle Holder and Pocket *b Plastic Bottle
*c File, Tablet Computer etc. - -





i.

Functional Items / Equipment

i.

Accessory Socket

·

An accessory socket (power outlet socket assembly No. 1) is positioned in the instrument panel under cover No. 3 in consideration of driver accessibility.

Accessory Socket (The illustration shown is an example only.)
V123201C01
1.167,0.583 1.25,0.583 1.25,0.583 2.667,2 true 1.833,3.667 1.917,3.667 1.917,3.667 3.417,2 true 1.021,0.5 1.333,0.656 0.313,0.156 10 false *1 1.688,3.573 2,3.729 0.313,0.156 10 false *2
*1 Instrument Panel Under Cover No. 3 *2 Power Outlet Socket Assembly No. 1


·

An accessory socket is positioned on the side of the center seat cup holder (instrument panel cup holder assembly).

Center Seat Cup Holder (The illustration shown is an example only.)
V123202C01
3.448,1.323 4.448,0.323 4.448,0.323 4.531,0.323 true 3.75,1.667 5.167,0.25 5.167,0.25 5.25,0.25 true 3.75,2.75 4.667,3.667 4.667,3.667 4.75,3.667 true 5.281,0.167 5.594,0.323 0.313,0.156 10 false *1 4.563,0.25 4.875,0.406 0.313,0.156 10 false *2 4.792,3.573 5.104,3.729 0.313,0.156 10 false *a
*1 Center Seat Cup Holder (Instrument Panel Cup Holder Assembly) *2 Accessory Socket
*a Portable Music Player, Smartphone, etc. - -




ii.

USB Jack (GL Grade)

·

A USB jack (USB charger socket) is provided in each bottle holder of the quarter trim board and side quarter trim board, making it possible to charge cellular phones from the rear seat. Also, the USB jack is positioned so that it can be used even while a drink is being stored.

USB Jack (The illustration shown is an example only.)
V123203C01
1,2.917 1.083,2.917 1.083,2.917 2,2 true 5.333,2.917 5.25,2.917 5.25,2.917 4.333,2 true 6.75,2.917 6.667,2.917 6.667,2.917 5.75,2 true 2.552,1.833 2.552,0.333 true 3.969,1.833 3.969,0.333 true 5.365,1.833 5.365,0.333 true 3.5,5.417 3.5,4.5 true 0.865,2.823 1.177,2.979 0.313,0.156 10 false *1 5.365,2.833 5.677,2.99 0.313,0.156 10 false *2 6.781,2.844 7.094,3 0.313,0.156 10 false *3 3.438,5.448 3.75,5.604 0.313,0.156 10 false *4 3.906,0.167 4.219,0.323 0.313,0.156 10 false *4 2.479,0.156 2.792,0.313 0.313,0.156 10 false *4 5.302,0.177 5.615,0.333 0.313,0.156 10 false *4
*1 Quarter Trim Board Assembly RR LH *2 Quarter Side Trim Board Assembly LH
*3 Quarter Trim Board Assembly FR LH *4 USB Jack (USB Charger Socket)





j.

Sound absorbing and Vibration Damping Material

i.

Instrument Panel

·

Noise absorption material and noise insulation material are positioned in various parts of the instrument panel to prevent engine noise and air conditioning noise from entering the cabin for quietness.*

HINT:

*: Sound insulation materials differ depending on the model.


Instrument Panel (This illustration is an example only.)
V123522C01
2.417,2.083 1.333,1 1.333,1 1.25,1 true 3.25,1.583 2.167,0.5 2.167,0.5 2.083,0.5 true 6.333,2.75 6.25,2.75 6.25,2.75 5.167,1.667 true 6.083,3.75 6,3.75 6,3.75 4.917,2.667 true 1.938,0.417 2.25,0.573 0.313,0.156 10 false *1 1.115,0.917 1.427,1.073 0.313,0.156 10 false *2 6.125,3.667 6.438,3.823 0.313,0.156 10 false *3 6.365,2.667 6.677,2.823 0.313,0.156 10 false *4
*1 Instrument Panel Cushion No. 1 *2 Instrument Panel Cushion No. 2
*3 Instrument Panel Under Silencer Pad No. 1 *4 Instrument Panel Cushion No. 3




ii.

Instrument Panel Reinforcement Assembly

·

A collar and bracket are provided for the instrument panel reinforcement assembly, blocking holes in the dash silencer and helping suppress engine noise penetration.

Instrument Panel Reinforcement Assembly (This illustration is an example only.)
V123523C01
0.438,1.458 0.521,1.458 0.521,1.458 0.771,1.708 true 0.448,2.083 0.531,2.083 0.531,2.083 0.781,1.833 true 3.417,4 3.333,4 3.333,4 2.75,3.417 true 6.469,1.885 6.385,1.885 6.385,1.885 5.969,2.302 true 6.583,2.469 6.5,2.469 6.5,2.469 6.083,2.885 true 5.083,2.958 5.167,2.958 5.167,2.958 5.583,3.375 true 6.083,3.083 6.5,3.5 6.5,3.5 6.583,3.5 true 6.615,3.396 6.781,3.573 0.167,0.177 10 false *1 0.313,2 0.469,2.156 0.156,0.156 10 false *2 0.292,1.375 0.458,1.531 0.167,0.156 10 false *3 6.5,1.802 6.656,1.958 0.156,0.156 10 false *4 5.917,4.604 6.094,4.781 0.177,0.177 10 false *a 2.042,1.083 2.198,1.24 0.156,0.156 10 false A 1.25,2.083 1.406,2.24 0.156,0.156 10 false A 6.615,2.385 6.781,2.542 0.167,0.156 10 false *3 4.948,2.865 5.104,3.021 0.156,0.156 10 false *2 3.448,3.906 3.615,4.083 0.167,0.177 10 false *1
*1 Instrument Panel Reinforcement Assembly *2 Collar
*3 Bracket *4 Dash Panel Silencer Assembly
*a A - A Cross Section - -




iii.

Roof Headlining / Body / Floor Mat

·

Sound insulation materials are optimally positioned over a wide area that includes the floor board, floor mat, door trim and ceiling, achieving a quiet interior atmosphere.*

HINT:

*: Sound insulation materials differ depending on the model.


Roof Headlining (This illustration is an example only.)
V123204C01
1.5,2.583 1.583,2.583 1.583,2.583 2,2.167 false 3.333,3.083 3.417,3.083 3.417,3.083 3.833,2.667 false 0.417,0.917 0.5,0.917 0.5,0.917 0.917,1.333 true 1.094,0.521 1.177,0.521 1.177,0.521 1.594,0.938 true 3.156,0.438 3.073,0.438 3.073,0.438 2.656,0.854 true 3.583,0.521 3.5,0.521 3.5,0.521 3.083,0.938 true 4.021,0.646 3.938,0.646 3.938,0.646 3.521,1.063 true 4.646,0.781 4.563,0.781 4.563,0.781 4.146,1.198 true 5.156,0.938 5.073,0.938 5.073,0.938 4.656,1.354 true 5.667,1.083 5.583,1.083 5.583,1.083 5.167,1.5 true 6.646,1.365 6.563,1.365 6.563,1.365 6.146,1.781 true 1.333,2.5 1.5,2.656 0.167,0.156 10 false *1 3.167,3 3.333,3.167 0.167,0.167 10 false *2 0.271,0.823 0.448,0.99 0.177,0.167 10 false *a 0.938,0.427 1.115,0.594 0.177,0.167 10 false *a 3.177,0.344 3.354,0.51 0.177,0.167 10 false *a 3.604,0.427 3.781,0.594 0.177,0.167 10 false *a 4.042,0.552 4.219,0.719 0.177,0.167 10 false *a 4.656,0.688 4.833,0.854 0.177,0.167 10 false *a 5.177,0.833 5.354,1 0.177,0.167 10 false *a 5.688,0.99 5.865,1.156 0.177,0.167 10 false *a 6.667,1.271 6.844,1.438 0.177,0.167 10 false *a
*1 Roof No. 1 Headlining *2 Roof Headlining Assembly Rear
*a Noise Absorbing Felt (Polyethylene Terephthalate (PET)) - -


Body (This illustration is an example only.)
V123520C01
1.875,0.469 1.875,0.302 true 2.531,0.948 2.531,0.781 true 2.281,1.271 2.531,1.271 true 2.281,2.146 2.531,2.146 true 2.26,2.271 2.51,2.271 true 4.417,1.615 4.417,1.448 true 4,1.083 4.167,1.083 true 5.313,1.125 5.313,0.99 true 5.198,1.427 5.365,1.427 true 5.615,1.625 5.781,1.625 true 5.896,1.552 6.063,1.552 true 6.604,1.875 6.771,1.875 true 3.76,2.635 4.01,2.635 true 5.604,2.281 5.771,2.281 true 5.573,2.573 5.74,2.573 true 4.708,1.917 4.875,1.917 true 4.729,2.323 4.896,2.323 true 6.698,2.802 6.948,2.802 true 5.875,2.948 5.875,2.781 true 0.51,2.823 0.51,2.656 true 1.115,3.365 1.115,3.198 true 0.979,3.938 1.229,3.938 true 2.552,3.49 2.719,3.49 true 3.042,3.302 3.042,3.167 true 3.365,3.802 3.531,3.802 true 3.625,3.667 3.792,3.667 true 3.958,3.99 4.125,3.99 true 4.25,3.865 4.417,3.865 true 4.792,3.74 4.792,3.604 true 5.156,4.302 5.323,4.302 true 0.969,4.625 1.219,4.625 true 1.542,4.563 1.792,4.563 true 1.302,4.49 1.302,4.354 true 2.938,4.385 2.938,4.219 true 3.74,4.594 3.74,4.427 true 4.813,4.896 4.813,4.729 true 3.167,4.823 3.333,4.823 true 3.896,4.99 4.063,4.99 true 4.333,5.313 4.333,5.146 true 4.844,5.344 4.844,5.177 true 5.25,5.333 5.75,5.333 true 3.042,4.667 2.25,4.833 2.25,4.833 2.635,4.573 true 3.896,4.906 3.156,5.083 3.156,5.083 3.542,4.823 true 4.396,4.948 4.396,4.531 4.396,4.531 4.76,5.052 true 5,5.146 5.771,4.729 5.771,4.729 5.375,5.229 true 3.167,4.333 3.167,4.167 true 3.885,4.542 3.885,4.375 true 4.969,4.802 4.969,4.635 true 6.417,2.615 6.969,2.385 6.969,2.385 6.813,2.688 true 5.802,2.406 6.167,2 6.167,2 6.198,2.479 true 5.427,2.76 5.313,2.375 true 6.5,2.26 6.167,2 false 1.76,0.688 1.917,0.844 0.156,0.156 10 false *1 1.854,1.969 2.031,2.135 0.177,0.167 10 false *2 2.698,1.74 2.896,1.896 0.198,0.156 10 false *3 2.552,2.344 2.719,2.51 0.167,0.167 10 false *4 3.438,0.552 3.615,0.719 0.177,0.167 10 false *5 3.438,2.063 3.604,2.219 0.167,0.156 10 false *6 4.302,0.406 4.479,0.563 0.177,0.156 10 false *7 5.198,0.708 5.354,0.865 0.156,0.156 10 false *8 6.167,0.99 6.344,1.156 0.177,0.167 10 false *9 3.885,1.333 4.135,1.5 0.25,0.167 10 false *10 5.135,1.708 5.365,1.885 0.229,0.177 10 false *11 5.75,1.844 5.99,2 0.24,0.156 10 false *12 6.677,2.146 6.906,2.313 0.229,0.167 10 false *13 4.208,2.427 4.448,2.594 0.24,0.167 10 false *14 4.115,2.833 4.375,2.99 0.26,0.156 10 false *15 5.104,2.604 5.365,2.771 0.26,0.167 10 false *16 6.063,3.01 6.313,3.167 0.25,0.156 10 false *17 0.354,3.052 0.604,3.208 0.25,0.156 10 false *18 0.49,4.313 0.74,4.49 0.25,0.177 10 false *19 1.302,3.198 1.552,3.365 0.25,0.167 10 false *20 1.26,4.76 1.5,4.927 0.24,0.167 10 false *21 3.115,2.844 3.365,3 0.25,0.156 10 false *22 4.719,3.281 4.969,3.448 0.25,0.167 10 false *23 2.344,3.688 2.573,3.854 0.229,0.167 10 false *24 3.458,4.063 3.719,4.229 0.26,0.167 10 false *25 4.083,4.229 4.333,4.385 0.25,0.156 10 false *26 5.302,4.552 5.552,4.719 0.25,0.167 10 false *27 2.74,4.885 3.01,5.042 0.271,0.156 10 false *28 3.635,5.104 3.896,5.271 0.26,0.167 10 false *29 4.781,5.521 5.052,5.667 0.271,0.146 10 false *30 1.792,0.125 1.958,0.302 0.167,0.177 10 false *a 2.458,0.604 2.635,0.76 0.177,0.156 10 false *b 2.146,2.052 2.313,2.219 0.167,0.167 10 false *c 2.135,1.167 2.302,1.344 0.167,0.177 10 false *a 2.125,2.188 2.292,2.365 0.167,0.177 10 false *a 4.344,1.281 4.521,1.438 0.177,0.156 10 false *b 4.167,1 4.344,1.156 0.177,0.156 10 false *b 5.25,1.125 5.427,1.281 0.177,0.156 10 false *b 5.385,1.344 5.563,1.5 0.177,0.156 10 false *b 5.479,1.531 5.656,1.688 0.177,0.156 10 false *b 6.063,1.458 6.24,1.615 0.177,0.156 10 false *b 6.458,1.781 6.635,1.938 0.177,0.156 10 false *b 4.927,1.833 5.094,2.01 0.167,0.177 10 false *a 3.615,2.542 3.781,2.719 0.167,0.177 10 false *a 5.448,2.177 5.615,2.354 0.167,0.177 10 false *a 5.427,2.469 5.594,2.646 0.167,0.177 10 false *a 4.896,2.229 5.063,2.406 0.167,0.177 10 false *a 6.969,2.708 7.135,2.885 0.167,0.177 10 false *a 5.792,2.938 5.958,3.115 0.167,0.177 10 false *a 0.427,2.5 0.594,2.677 0.167,0.177 10 false *a 1.042,3.042 1.219,3.198 0.177,0.156 10 false *b 0.854,3.844 1.021,4.021 0.167,0.177 10 false *a 2.979,3.302 3.156,3.458 0.177,0.156 10 false *b 2.708,3.396 2.885,3.552 0.177,0.156 10 false *b 3.219,3.708 3.396,3.865 0.177,0.156 10 false *b 3.823,3.573 4,3.729 0.177,0.156 10 false *b 3.813,3.896 3.99,4.052 0.177,0.156 10 false *b 4.427,3.76 4.604,3.917 0.177,0.156 10 false *b 4.74,3.74 4.917,3.896 0.177,0.156 10 false *b 5.021,4.219 5.198,4.375 0.177,0.156 10 false *b 0.833,4.531 1,4.708 0.167,0.177 10 false *a 1.813,4.469 1.979,4.635 0.167,0.167 10 false *c 1.229,4.198 1.396,4.365 0.167,0.167 10 false *c 2.865,4.052 3.031,4.229 0.167,0.177 10 false *a 3.656,4.271 3.823,4.448 0.167,0.177 10 false *a 4.729,4.552 4.896,4.729 0.167,0.177 10 false *a 3.344,4.719 3.51,4.896 0.167,0.177 10 false *a 4.052,4.885 4.219,5.063 0.167,0.177 10 false *a 4.271,5.281 4.438,5.458 0.167,0.177 10 false *a 4.771,5.313 4.938,5.49 0.167,0.177 10 false *a 5.771,5.229 5.938,5.406 0.167,0.177 10 false *a 2.104,4.781 2.281,4.938 0.177,0.156 10 false *b 3.042,5.052 3.219,5.208 0.177,0.156 10 false *b 4.333,4.354 4.51,4.51 0.177,0.156 10 false *b 5.781,4.594 5.958,4.75 0.177,0.156 10 false *b 3.073,4 3.25,4.156 0.177,0.156 10 false *b 3.813,4.198 3.99,4.354 0.177,0.156 10 false *b 4.906,4.458 5.083,4.615 0.177,0.156 10 false *b 6.958,2.219 7.135,2.375 0.177,0.156 10 false *b 5.396,2.781 5.573,2.938 0.177,0.156 10 false *b 6.094,1.833 6.271,1.99 0.177,0.156 10 false *b
*1 Front Pillar Garnish RH *2 Cowl Side Trim Board RH
*3 Front Door Trim Board Sub-assembly RH *4 Front Door Scuff Plate RH
*5 Center Pillar Garnish RH *6 Center Pillar Garnish Lower RH
*7 Slide Door Trim Cover Upper RH *8 Roof Side Rail Garnish Assembly Front RH
*9 Roof Side Rail Garnish Assembly Rear RH *10 Slide Door Window Garnish RH
*11 Quarter Pillar Garnish RH (1) *12 Quarter Pillar Garnish RH (2)
*13 Rear Pillar Garnish Upper RH *14 Slide Door Trim Board Assembly RH
*15 Rear Door Scuff Plate RH *16 Side Trim Board Assembly RH
*17 Quarter Trim Board Assembly RR RH *18 Front Pillar Garnish LH
*19 Cowl Side Trim Board LH *20 Front Door Trim Board Sub-assembly LH
*21 Front Door Scuff Plate LH *22 Roof Side Rail Garnish Assembly Front LH
*23 Roof Side Rail Garnish Assembly Rear LH *24 Center Pillar Garnish LH
*25 Quarter Pillar Garnish LH (1) *26 Quarter Pillar Garnish LH (2)
*27 Rear Pillar Garnish Upper LH *28 Quarter Trim Panel Assembly LH
*29 Side Trim Board Assembly LH *30 Quarter Trim Board Assembly RR LH
*a Noise Absorbing Felt *b Noise Absorbing Pad
*c Noise Absorbing Sheet - -


Floor Mat (This illustration is an example only.)
V123521C01
4.385,1 4.802,0.583 4.802,0.583 4.885,0.583 true 0.833,3.5 0.917,3.5 0.917,3.5 1.333,3.083 true 5.583,3.25 6,2.833 6,2.833 6.083,2.833 true 2.25,3.917 2.333,3.917 2.333,3.917 2.75,3.5 true 3.167,4.167 3.25,4.167 3.25,4.167 3.667,3.75 true 4.417,4.333 4.5,4.333 4.5,4.333 4.917,3.917 true 4.917,0.5 5.229,0.656 0.313,0.156 10 false *1 0.688,3.417 1,3.573 0.313,0.156 10 false *2 2.104,3.833 2.417,3.99 0.313,0.156 10 false *3 3.042,4.083 3.354,4.24 0.313,0.156 10 false *4 4.281,4.25 4.594,4.406 0.313,0.156 10 false *5 6.104,2.75 6.417,2.906 0.313,0.156 10 false *6
*1 Rear Floor Mat *2 Front Floor Mat Assembly
*3 Rear Floor Board Sub-assembly Upper No. 1 *4 Rear Floor Board Sub-assembly Upper No. 2
*5 Rear Floor Board Sub-assembly Upper No. 4 *6 Rear Floor Board Sub-assembly Upper No. 3





k.

Safety Features

i.

The end of the instrument panel has a concave design, providing sufficient distance from the windshield glass. In the event of a collision with a pedestrian, a crushable zone from the point of contact with the pedestrian's head, etc. to the end of the instrument panel is provided, helping reduce the extent of the pedestrian's injuries.


ii.

An enclosing structure is used to install the instrument panel to the cowl assembly. As a result, when a pedestrian's head, etc., impacts the vehicle, the instrument panel easily detaches from the cowl assembly, helping reduce the extent of the pedestrian's injuries.

Safety Features (The illustration shown is an example only.)
V123524C01
2.667,1.417 2.25,1 2.25,1 2.167,1 true 1.417,4.25 1,3.833 1,3.833 0.917,3.833 true 6.125,4.635 6.542,4.219 6.542,4.219 6.625,4.219 true 3.219,4.521 3.635,4.104 3.635,4.104 3.719,4.104 true 5.021,5.323 5.021,4.99 true 4.719,5 4.552,4.833 4.552,4.833 4.469,4.833 true 2.01,0.917 2.156,1.073 0.146,0.156 10 false *1 0.76,3.76 0.917,3.917 0.156,0.156 10 false *2 4.323,4.76 4.49,4.906 0.167,0.146 10 false *3 2.104,5.625 2.417,5.781 0.313,0.156 10 false *a 5.542,5.635 5.854,5.792 0.313,0.156 10 false *b 2.271,4.188 2.583,4.344 0.313,0.156 10 false *c 4.948,5.313 5.26,5.469 0.313,0.156 10 false *d 5.354,4.042 5.667,4.198 0.313,0.156 10 false *e 6.021,5.365 6.333,5.521 0.313,0.156 10 false *f 3.75,4.031 3.896,4.188 0.146,0.156 10 false *1 6.667,4.146 6.813,4.302 0.146,0.156 10 false *1 4.354,0.958 4.5,1.115 0.146,0.156 10 false A 3.292,0.625 3.438,0.781 0.146,0.156 10 false A 2.708,2.167 2.854,2.323 0.146,0.156 10 false B 1.5,1.813 1.646,1.969 0.146,0.156 10 false B
*1 Instrument Panel *2 Windshield Glass
*3 Cowl Assembly - -
*a A - A Cross Section *b B - B Cross Section
*c Crushable Zone *d Enclosing Structure
*e Impact Energy *f Drop Off