CONSTRUCTION
Aero Parts
Aerodynamic parts are provided on various parts of the vehicle and the Cd level* is reduced to achieve improved fuel efficiency.
*: The Cd level refers to the air resistance coefficient. Cd stands for Constant drag. The lower the level is, the lesser the air resistance is. This improves fuel efficiency.
Front Spats (Front Wheel Opening Extension Pad)
A front wheel opening extension pad is used to reduce the volume of air hitting against the rotating body of the tire. As a result, turbulence generated by the rotation of the front tire which disturbs the surrounding airflow has been suppressed, thus reducing air resistance and achieving a high level of straight-line stability at high speed.
| *1 | Front Wheel Opening Extension Pad LH | *2 | Front Tire |
|
Airflow | - | - |
Fender Liner (Front Fender Liner)
A groove is provided in the front fender liner. As a result, airflow in the wheel housing is introduced to smoothly flow parallel to the tires to make it flow in the wheel housing smoothly, thus providing superior maneuver stability.
| *1 | Front Fender Liner LH | *2 | Front Tire |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | View from C | *d | View from D |
| *e | Groove Structure | - | - |
Rear Spats (Rear Wheel House Plate Front)
A rear wheel house plate front is used to reduce the volume of air hitting against the rotating body of the tire. As a result, turbulence generated by the rotation of the rear tire which disturbs the surrounding airflow has been suppressed, thus reducing air resistance and providing a high level of straight-line stability at high speed.
| *1 | Rear Wheel House Plate Front LH | *2 | Rear Tire |
|
Airflow | - | - |
Aero Stabilizing Fin
An aero stabilizing fin is provided on the rear combination light assembly and a type of aerodynamic technology known as a vortex generator is used for the fin. Small vortexes are purposely generated in airflow to push the vehicle from the left and right sides, thus providing excellent operation stability.
| *1 | Rear Combination Light Assembly LH | - | - |
| *a | Aero Stabilizing Fin | - | - |
|
Airflow | - | - |
Under Cover
Engine under covers and floor under covers* are provided to reduce the Cd value (Cd: Constant drag, the air resistance coefficient), improving fuel economy.
*: Engine under covers and floor under covers are provided depending on the model.
| *1 | Front Fender Liner LH | *2 | Front Bumper Absorber Lower |
| *3 | Front Fender Liner RH | *4 | Engine Under Cover Sub-assembly No. 1 |
| *5 | Engine Under Cover No. 4 Center | *6 | Engine Under Cover Sub-assembly No. 2 |
| *7 | Step Plate Cover LH | *8 | Engine Under Cover Sub-assembly No. 3 |
| *9 | Step Plate Cover RH | *10 | Rear Floor Step Cover No. 2 |
| *11 | Step Plate Cover Sub-assembly RH | *12 | Body Lower Back Cover LH |
| *13 | Floor Under Cover No. 2 | - | - |
| *a | Aero Stabilizing Fin | - | - |
| *1 | Front Fender Liner LH | *2 | Front Bumper Absorber Lower |
| *3 | Front Fender Liner RH | *4 | Engine Under Cover Sub-assembly No. 1 |
| *5 | Engine Under Cover No. 4 Center | *6 | Engine Under Cover Sub-assembly No. 2 |
| *7 | Step Plate Cover LH | *8 | Transmission Under Cover |
| *9 | Engine Under Cover Sub-assembly No. 3 | *10 | Step Plate Cover RH |
| *11 | Rear Floor Step Cover No. 2 | *12 | Step Plate Cover Sub-assembly RH |
| *13 | Body Lower Back Cover LH | *14 | Floor Under Cover No. 2 |
| *a | Aero Stabilizing Fin | - | - |
| *1 | Front Fender Liner LH | *2 | Front Bumper Absorber Lower |
| *3 | Front Fender Liner RH | *4 | Engine Under Cover Sub-assembly No. 1 |
| *5 | Engine Under Cover No. 4 Center | *6 | Engine Under Cover Sub-assembly No. 2 |
| *7 | Step Plate Cover LH | *8 | Engine Under Cover Sub-assembly No. 3 |
| *9 | Step Plate Cover RH | *10 | Rear Floor Step Cover No. 2 |
| *11 | Step Plate Cover Sub-assembly RH | *12 | Body Lower Back Cover LH |
| *13 | Floor Under Cover No. 2 | - | - |
| *a | Aero Stabilizing Fin | - | - |
| *1 | Front Fender Liner LH | *2 | Front Bumper Absorber Lower |
| *3 | Front Fender Liner RH | *4 | Engine Under Cover Sub-assembly No. 1 |
| *5 | Engine Under Cover No. 4 Center | *6 | Engine Under Cover Sub-assembly No. 2 |
| *7 | Step Plate Cover LH | *8 | Transmission Under Cover |
| *9 | Engine Under Cover Sub-assembly RH | *10 | Step Plate Cover RH |
| *11 | Rear Floor Step Cover No. 2 | *12 | Step Plate Cover Sub-assembly RH |
| *13 | Body Lower Back Cover LH | *14 | Floor Under Cover No. 2 |
| *a | Aero Stabilizing Fin | - | - |