CONSTRUCTION
Sound Absorption and Insulation Structure
Various types of silencers are positioned around the floor panel and engine compartment to greatly suppress vibration and noise that are transmitted into the interior from parts such as the engine and tires, achieving superior quietness. Also, materials such as foamed materials, sound insulation sealant and damping materials are optimally positioned to achieve superior NVH* performance.
*: An abbreviation created by taking the first letter of Noise (unpleasant sounds and loud sounds), Vibration (vibrations from the engine and tires) and Harshness (vibrations felt through the steering wheel, seats and floor according to height changes in the road surface, etc.). NVH is used to describe the level of riding comfort and sound quality actually experienced by passengers.
Floor Silencer
To reduce interior noise (road noise / engine noise), asphalt sheets are used. The position, material and thickness vary depending on the model, achieving optimal NVH performance and weight reduction for each model.
| *a | Asphalt Seat | *b | Except Van Type |
| *a | Asphalt Seat | *b | Except Van Type |
| *a | Asphalt Seat | - | - |
| *a | Asphalt Seat | - | - |
| *a | Asphalt Seat | - | - |
| *a | Asphalt Seat | - | - |
| *a | Asphalt Seat | - | - |
| *a | Asphalt Seat | - | - |
Sealing Material
Foamed materials, NV covers and sponge sealant are optimally placed in the side member opening and front header to suppress wind noise and road noise which enter the cabin.
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | C - C Cross Section | *d | D - D Cross Section |
| *e | E - E Cross Section | *f | F - F Cross Section |
| *g | G - G Cross Section | *h | H - H Cross Section |
| *i | I - I Cross Section | *j | J - J Cross Section |
| *k | K - K Cross Section | *l | L - L Cross Section |
| *m | M - M Cross Section | *n | N - N Cross Section |
| *o | O - O Cross Section | *p | P - P Cross Section |
| *q | Q - Q Cross Section | *r | GL Grade, High Spec Van Only |
| *s | GL Grade Only | *t | All Specification |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | C - C Cross Section | *d | D - D Cross Section |
| *e | E - E Cross Section | *f | F - F Cross Section |
| *g | G - G Cross Section | *h | H - H Cross Section |
| *i | I - I Cross Section | *j | J - J Cross Section |
| *k | K - K Cross Section | *l | L - L Cross Section |
| *m | M - M Cross Section | *n | N - N Cross Section |
| *o | O - O Cross Section | *p | GL Grade, High Spec Van Only |
| *q | GL Grade Only | *r | All Specification |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | C - C Cross Section | *d | D - D Cross Section |
| *e | E - E Cross Section | *f | F - F Cross Section |
| *g | G - G Cross Section | *h | H - H Cross Section |
| *i | I - I Cross Section | *j | J - J Cross Section |
| *k | K - K Cross Section | *l | L - L Cross Section |
| *m | M - M Cross Section | *n | N - N Cross Section |
| *o | O - O Cross Section | *p | P - P Cross Section |
| *q | GL Grade, High Spec Van Only | *r | GL Grade Only |
| *s | All Specification | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | C - C Cross Section | *d | D - D Cross Section |
| *e | E - E Cross Section | *f | F - F Cross Section |
| *g | G - G Cross Section | *h | H - H Cross Section |
| *i | I - I Cross Section | *j | J - J Cross Section |
| *k | K - K Cross Section | *l | L - L Cross Section |
| *m | M - M Cross Section | *n | GL Grade, High Spec Van Only |
| *o | GL Grade Only | *p | All Specification |
Urethane foam is used to seal pillar cross sections, reducing the amount of noise that penetrates into the cabin.
| *A | Side with Rear Slide Door | *B | Side without Rear Slide Door |
| *1 | Quarter Vent Silencer | *2 | Quarter Wheel House Pad Inner Front RH |
| *3 | Quarter Wheel House Pad Inner Rear RH | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | C - C Cross Section | *d | D - D Cross Section |
| *e | E - E Cross Section | - | - |
| *A | Side with Rear Slide Door | *B | Side without Rear Slide Door |
| *1 | Quarter Vent Silencer | *2 | Quarter Wheel House Pad Inner Front RH |
| *3 | Quarter Wheel House Pad Inner Rear RH | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | C - C Cross Section | *d | D - D Cross Section |
| *e | E - E Cross Section | *f | F - F Cross Section |
Damping sheets are provided near the quarter panel, reducing interior noise (operational noise / muffled sounds).
| *A | Side with Rear Slide Door | *B | Side without Rear Slide Door |
| *1 | Quarter Panel Silencer Sheet | - | - |
| *1 | Quarter Panel Silencer Sheet | - | - |
| *A | Side without Rear Slide Door | *B | Side with Rear Slide Door |
| *1 | Quarter Panel Silencer Sheet | - | - |
| *1 | Quarter Panel Silencer Sheet | - | - |
Sound Absorption and Insulation Structure around Engine Compartment
A hood insulator (*2 in illustration) is provided below the hood sub-assembly (*1 in illustration) and the cowl top insulator sheet (*5 in illustration) is provided below the cowl top panel sub-assembly outer (*6 in illustration) to suppress engine drive noise which penetrates the cabin and provide excellent quietness.
| *1 | Hood Sub-assembly | *2 | Hood Insulator |
| *3 | Cowl Top Ventilator Louver Sub-assembly | *4 | Cowl Assembly |
| *5 | Cowl Top Insulator Sheet | *6 | Cowl Top Panel Sub-assembly Outer |
| *a | A - A Cross Section | - | - |
Damping sheets (cowl top insulator sheet No. 2) are provided for the cowl top panel sub-assembly outer, reducing interior noise (operational noise / muffled sounds).*
*: GL grade
| *1 | Cowl Top Panel Sub-assembly Outer | *2 | Cowl Top Insulator Sheet No. 2 |
Steel sandwich panel filler damping materials (dash panel insulator plate No. 1) are provided in the dash panel sub-assembly. As a result, steel sandwich panel filler damping materials reduce road and engine noise which enters the cabin.
| *1 | Dash Panel Sub-assembly | *2 | Dash Panel Insulator Plate No. 1 |
| *1 | Dash Panel Sub-assembly | *2 | Dash Panel Insulator Plate No. 1 |
The dash outer silencer (dash panel insulator outer: *1 in illustration "Dash Panel Insulator Outer") is provided in the engine room side of the dash panel sub-assembly (*2 in illustration) and a dash panel insulator assembly (*1 in illustration "Dash Panel Insulator Outer") is provided in the cabin side. The dash panel insulator assembly (*1 in illustration "Dash Panel Insulator Assembly") wraps around the top of the cowl panel (dash panel RR: *3 in illustration "Dash Panel Insulator Assembly") and has a shape which fills in holes and gaps as much as possible. This structure absorbs and insulates mechanical noise such as engine noise and ensures excellent quietness.
| *1 | Dash Panel Insulator Outer | *2 | Dash Panel Sub-assembly |
| *a | A - A Cross Section | - | - |
| *1 | Dash Panel Silencer Assembly | *2 | Dash Panel Sub-assembly |
| *3 | Cowl Assembly | - | - |
| *a | A - A Cross Section | - | - |
| *1 | Dash Panel Insulator Outer | *2 | Dash Panel Sub-assembly |
| *a | A - A Cross Section | - | - |
| *1 | Dash Panel Silencer Assembly | *2 | Dash Panel Sub-assembly |
| *3 | Cowl Assembly | - | - |
| *a | A - A Cross Section | - | - |
The front fender side panel protector is provided to reduce the engine noise which enters the cabin.
| *1 | Front Fender Side Panel Protector LH | *2 | Front Fender Panel LH |
| *3 | Front Side Panel Outer LH | *4 | Front Door Panel Outer LH |
| *5 | Front Door Panel Inside LH | - | - |
| *a | A - A Cross Section | *b | Caulking Sponge |
|
Noise | - | - |
The fender apron mudguard seal sub-assembly and fender apron mudguard seal are used in the front fender to reduce the noise which travels through the fender toward the cabin.*
*: GL grade
| *1 | Fender Apron Mudguard Seal Sub-assembly LH | *2 | Front Fender Panel LH |
| *3 | Hood Panel | *4 | Fender Apron Mudguard Seal LH |
| *a | A - A Cross Section | - | - |
An insulator with superior sound absorption effects (sound insulation material) is used around the front fender liner to suppress the sound created by flying sand and water from the wheelhouse and road noise in order to provide excellent quietness.
| *1 | Front Fender Liner LH | - | - |
| *a | Insulator | - | - |
Window Area
An acoustic layer laminated glass*1 is used for the windshield glass (*1 in illustration), reducing noise that enters from the outside to the cabin through the doors.*2
*1: Glass including a high level of sound proofing interlayer with a laminated glass structure (Glass - Interlayer - Glass)
*2: GL grade
1-sided adhesive molding (windshield molding outside (*3 in illustration)) is used to reduce the difference in height between the windshield glass and roof panel (C in illustration), and dampen wind noise.
The difference in height between the windshield molding outside No. 2 and windshield glass (D in illustration), the width of the front body pillar (front side panel outer: E in illustration) and the corner shape of the front body pillar (front side panel outer: R in illustration) have been optimized to dampen wind noise.
| *1 | Windshield Glass | *2 | Roof Panel Front |
| *3 | Windshield Molding Outside | *4 | Front Side Panel Outer RH |
| *5 | Windshield Molding Outside No. 2 RH | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | Acoustic Layer | - | - |
A cowl vent seal (*2 in illustration) is provided behind the hood sub-assembly (*1 in illustration) to create a structure that diverts the air flow, suppressing the generation of wind noise.
| *1 | Hood Sub-assembly | *2 | Cowl Vent Seal |
| *3 | Cowl Top Panel Sub-assembly Outer | *4 | Cowl Top Ventilator Louver Sub-assembly |
| *a | A - A Cross Section | - | - |
|
Airflow | - | - |
A dynamic damper*1 (windshield header panel damper sub-assembly RH) is provided for the windshield header panel sub-assembly, reducing muffled sounds that are input from the road surface at the rear seats.*2
*1: A suppression device that uses additional mass and specific spring resonant frequencies to absorb or control excessive vibration.
*2: GL grade of standard roof models
| *1 | Windshield Header Panel Damper Sub-assembly RH | *2 | Windshield Header Panel Sub-assembly |
| *3 | Roof Panel Front | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
A floor panel side plate is provided for the fastening area of the rear seat and body side surface, reducing the amount of vibration transmitted from the body side surface.*
*: 4-door long wheel base commuter / GL grade (excluding models for Thailand)
| *1 | Floor Panel Side Plate RH | *2 | Rear Seat |
Also, a mass damper (frame weight RR) is provided for the engine rear mounting member sub-assembly, reducing transmission gear noise.*
Models with 1GD-FTV engine or models with 7GR-FKS engine and manual transmission
| *1 | Engine Rear Mounting Member Sub-assembly | *2 | Frame Weight RR |
A center bearing bracket rear is provided near the propeller shaft fastening area, reducing the amount of engine vibration.*
*: High roof models
| *1 | Center Bearing Bracket Rear | - | - |