Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › 2019.02–2019.06
NM35X0E _59 Vehicle Exterior _078981 EXTERIOR PANELS / TRIM _0391538 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  BODY SHELL  


CONSTRUCTION


a.

Body Shell

i.

The position of the body's structural parts is optimized, optimized connection methods are used and reinforcing materials are provided, creating a lightweight body structure with high rigidity and ensuring driving stability.


ii.

Each pillar is connected to the under body frameworks and a ring-shaped framework structure is used. As a result, the body shell has a high level of connecting rigidity and superior driving stability is provided.

Ring-shaped Framework Structure (This illustration is an example only.)
V123560C01
4.583,2.333 5.583,1.333 5.583,1.333 5.667,1.333 true 3.5,1.667 4.333,0.833 4.333,0.833 4.417,0.833 true 3.25,1.583 4.25,0.583 4.25,0.583 4.333,0.583 true 2.5,1.417 3.5,0.417 3.5,0.417 3.583,0.417 true 5.719,1.25 6.031,1.406 0.313,0.156 10 false *1 3.625,0.333 3.938,0.49 0.313,0.156 10 false *3 4.448,0.76 4.781,0.927 0.333,0.167 10 false *2 4.365,0.5 4.698,0.667 0.333,0.167 10 false *2
*1 Center Body Pillar *2 Quarter Body Pillar
*3 Rear Body Pillar - -



iii.

The dash panel sub-assembly (*2 in illustration) and front suspension tower (*1 in illustration) are directly connected, creating a highly rigid front suspension tower. Furthermore, a structure that connects the cowl assembly (*3 in illustration) and front suspension tower (*1 in illustration) is used, providing superior driving stability.

Front Suspension Tower (This illustration is an example only.)
V123561C01
0.833,3.833 0.917,3.833 0.917,3.833 1.917,2.833 true 0.917,1.083 1,1.083 1,1.083 1.917,2 true 5.25,3 6.167,3.917 6.167,3.917 6.25,3.917 true 4.417,2.667 6.167,4.417 6.167,4.417 6.25,4.417 true 4.917,2.5 6.25,1.167 6.25,1.167 6.333,1.167 true 3.667,2.5 5.667,0.583 5.667,0.583 5.75,0.583 true 6.292,3.833 6.604,3.99 0.313,0.156 10 false *1 5.781,0.51 6.094,0.667 0.313,0.156 10 false *2 0.771,1 1.083,1.156 0.313,0.156 10 false *3 6.281,4.313 6.594,4.469 0.313,0.156 10 false *a 6.375,1.083 6.688,1.24 0.313,0.156 10 false *b 0.688,3.74 1,3.896 0.313,0.156 10 false *1
*1 Front Suspension Tower *2 Dash Panel Sub-assembly
*3 Cowl Assembly - -
*a Dash panel sub-assembly used as shared panel *b Cowl assembly used to increase lateral strength



iv.

Design surface variations are emphasized and rigid reinforcements are positioned, reducing design surface panel thickness and weight. Consideration has been given to thin panels that do not easily deform or bend when pressed or heated.

Lightweight and Highly Rigid Body (The illustration shown is an example only.)
V123562C01
5,2.75 3.333,1.083 3.333,1.083 3.25,1.083 true 5.833,3.75 6.667,4.583 6.667,4.583 6.75,4.583 true 5.167,4.25 6.333,5.417 6.333,5.417 6.417,5.417 true 4.833,4.417 6.083,5.667 6.083,5.667 6.167,5.667 true 3.75,4.25 2.333,5.667 2.333,5.667 2.25,5.667 true 4.25,4.5 3,5.75 3,5.75 2.917,5.75 true 3.104,1 3.417,1.156 0.313,0.156 10 false *1 2.094,5.594 2.406,5.75 0.313,0.156 10 false *2 6.198,5.583 6.51,5.74 0.313,0.156 10 false *3 6.771,4.51 7.083,4.667 0.313,0.156 10 false *4 2.771,5.677 3.083,5.833 0.313,0.156 10 false *2 6.448,5.333 6.76,5.49 0.313,0.156 10 false *3
*1 Quarter Panel Extension Reinforcement LH *2 Roof Side Reinforcement Inner Rear
*3 Quarter Lock Pillar LH *4 Quarter Panel Reinforcement LH




b.

Suspension Member

i.

Frameworks are efficiently positioned near the load points of the front suspension, improving the rigidity at the load points of the front suspension. As a result, superior driving stability, ride comfort and NVH* performance are provided.

HINT:

*: An abbreviation created by taking the first letter of Noise (unpleasant sounds and loud sounds), Vibration (vibrations from the engine and tires) and Harshness (vibrations felt through the steering wheel, seats and floor according to height changes in the road surface, etc.). NVH is used to describe the level of riding comfort and sound quality actually experienced by passengers.


·

To efficiently receive large loads input to the front suspension arm sub-assembly lower No. 1 (*2 / *4 in illustration) from the tire, the front frame assembly (*3 in illustration) is positioned directly horizontal to the front suspension arm sub-assembly lower No. 1 (*2 / *4 in illustration), creating a highly rigid structure.

Suspension Member (This illustration is an example only.)
V123563C01
0.25,4.083 0.333,4.083 0.333,4.083 0.75,3.667 true 0.75,4.75 0.833,4.75 0.833,4.75 2.083,3.5 true 1.135,3.479 0.281,1.531 0.281,1.531 1.469,3.219 true 3.083,3.771 1.917,5.417 1.917,5.417 2.49,3.031 true 5.417,5.333 5.333,5.333 5.333,5.333 3.75,3.667 true 6.833,1.833 6.75,1.833 6.75,1.833 6.25,2.333 true 6.667,1.083 6.583,1.083 6.583,1.083 5,2.667 true 0.104,4 0.417,4.156 0.313,0.156 10 false *1 0.594,4.677 0.76,4.823 0.167,0.146 10 false *2 5.448,5.26 5.76,5.417 0.313,0.156 10 false *3 6.708,1.01 6.885,1.156 0.177,0.146 10 false *4 0.156,1.354 0.469,1.51 0.313,0.156 10 false *a 1.833,5.438 2.146,5.594 0.313,0.156 10 false *b 6.854,1.75 7.031,1.927 0.177,0.177 10 false *1
*1 Front Tire *2 Front Suspension Arm Sub-assembly Lower No. 1 RH
*3 Front Frame Assembly *4 Front Suspension Arm Sub-assembly Lower No. 1 LH
*a Load input to front suspension arm sub-assembly lower No. 1 RH from front tire *b Load input to front frame assembly from front suspension arm sub-assembly lower No. 1 RH





c.

Rear Suspension Installation Areas

i.

Frameworks are efficiently positioned near the load points of the rear suspension, improving the rigidity at the load points of the rear suspension. As a result, superior driving stability, ride comfort and NVH performance are provided.

·

A structure where the rear shock absorber plate No. 1 (*2 in illustration) and rear floor No. 2 center member brace outer (*3 in illustration) are positioned on both sides of the rear side member (*4 in illustration) is used to suppress twisting deformation of the shock absorber rear (*1 in illustration) installation area in response to input from the shock absorber assembly rear (*1 in illustration), ensuring the rigidity of the load points.

Rear Suspension Installation Areas (This illustration is an example only.)
V123564C01
4.417,1.417 4.417,0.167 true 5.146,1.25 5.146,0.167 true 5.333,1.25 5.333,0.167 true 5.167,3.5 5.167,1.917 true 1.833,6.25 1.917,6.25 1.917,6.25 2.667,5.5 true 4.979,5.917 5.396,5.5 5.396,5.5 5.479,5.5 true 2.979,6.479 2.979,6.146 false 3.896,6.417 3.896,6.083 false 3.615,6.354 3.615,6.021 false 5.115,3.521 5.427,3.677 0.313,0.156 10 false *1 5.26,0 5.573,0.156 0.313,0.156 10 false *2 4.354,0 4.667,0.156 0.313,0.156 10 false *3 5.052,0 5.365,0.156 0.313,0.156 10 false *4 1.677,6.177 1.99,6.333 0.313,0.156 10 false *5 5.635,1 5.76,1.156 0.125,0.156 10 false A 3.292,6.667 3.604,6.823 0.313,0.156 10 false *a 5.625,1.823 5.75,1.979 0.125,0.156 10 false A 5.396,2.073 5.552,2.25 0.156,0.177 10 true *b 2.927,6.49 3.24,6.646 0.313,0.156 10 false *3 3.563,6.375 3.875,6.531 0.313,0.156 10 false *4 3.844,6.438 4.156,6.594 0.313,0.156 10 false *2 5.51,5.417 5.823,5.573 0.313,0.156 10 false *1 4.688,1.125 4.875,1.292 0.188,0.167 10 true *b 4.26,5.906 4.417,6.083 0.156,0.177 10 true *b 3.302,4.833 3.458,5.01 0.156,0.177 10 true *b
*1 Shock Absorber Assembly Rear RH *2 Rear Shock Absorber Plate No. 1 RH
*3 Rear Floor No. 2 Center Member Brace Outer RH *4 Rear Side Member
*5 Rear Shock Absorber Plate No. 2 RH - -
*a A - A Cross Section *b Load input from shock absorber assembly rear (*1 in Illustration)





d.

Leaf Spring Front Side Installation Areas

i.

A hanger bracket structure (*4 in illustration), which is composed of 2 cross members (*2 in illustration) and outriggers (*3 in illustration), is used to handle the left and right loads (*a in illustration) input from the rear spring assembly (*1 in illustration), ensuring the rigidity of the load points of the leaf spring installation areas.

Leaf Spring Front Side Installation Areas (This illustration is an example only.)
V123565C01
1.417,2 1.031,0.552 1.031,0.552 1.917,1.833 true 0.417,3.167 0.5,3.167 0.5,3.167 1.417,2.25 true 0.417,3.667 0.5,3.667 0.5,3.667 1.667,2.5 true 2.25,2.667 0.75,4.417 0.75,4.417 2.667,2.5 true 4.75,4.083 4.667,4.083 4.667,4.083 4,3.417 true 4.906,4.573 4.823,4.573 4.823,4.573 3.906,3.656 true 4.271,4.677 4.188,4.677 4.188,4.677 3.417,3.917 true 4.771,4 5.083,4.156 0.313,0.156 10 false *1 0.625,4.417 0.938,4.573 0.313,0.156 10 false *2 0.938,0.396 1.25,0.552 0.313,0.156 10 false *3 0.271,3.583 0.583,3.74 0.313,0.156 10 false *4 0.271,3.083 0.583,3.24 0.313,0.156 10 false *5 4.948,4.49 5.26,4.646 0.313,0.156 10 false *3 4.302,4.594 4.615,4.75 0.313,0.156 10 false *3 3.417,2.823 3.594,2.979 0.177,0.156 10 true *a 2.677,3.083 2.854,3.24 0.177,0.156 10 true *a 2.844,3.896 3.021,4.052 0.177,0.156 10 true *a 3.813,4.021 3.99,4.177 0.177,0.156 10 true *a
*1 Rear RH Spring Assembly *2 Cross Member
*3 Outrigger *4 Hanger Bracket
*5 Rear Suspension Member Brace RH - -
*a Left and right loads input from rear RH spring assembly (*1 in Illustration) - -




e.

Leaf Spring Rear Side Installation Areas

i.

A rear floor side member plate (*5 in illustration), which reduces the offset from the rear side member (*6 in illustration), is provided to handle the left and right loads (*a in illustration) input to the spring shackle (*4 in illustration). Also, the shackle bracket (*2 in illustration) is composed of the rear spring hanger reinforcement FR (*1 in illustration), rear suspension arm bracket RR No. 2 (*8 in illustration) and rear floor side member plate (*5 in illustration), ensuring the rigidity of the load points of the spring shackle (*4 in illustration) installation areas.

Leaf Spring Rear Side Installation Areas (This illustration is an example only.)
V123566C01
5.917,2 6.5,2.583 6.5,2.583 6.583,2.583 true 5.167,2.167 6.583,0.75 6.583,0.75 6.667,0.75 true 0.417,1.917 0.5,1.917 0.5,1.917 1.583,0.833 true 0.833,4.083 0.917,4.083 0.917,4.083 2,3 true 2,3.917 2.083,3.917 2.083,3.917 3.167,2.833 true 2.75,4.333 2.833,4.333 2.833,4.333 4.083,3.083 true 3.583,4.417 3.667,4.417 3.667,4.417 4.25,3.833 true 5.5,3.833 5.417,3.833 5.417,3.833 5,3.167 true 1.854,3.833 2.167,3.99 0.313,0.156 10 false *1 2.604,4.25 2.917,4.406 0.313,0.156 10 false *2 0.688,4 1,4.156 0.313,0.156 10 false *3 3.448,4.333 3.76,4.49 0.313,0.156 10 false *4 5.531,3.75 5.719,3.917 0.188,0.167 10 false *5 0.26,1.833 0.438,1.99 0.177,0.156 10 false *6 6.615,2.5 6.792,2.656 0.177,0.156 10 false *7 6.708,0.667 7.021,0.823 0.313,0.156 10 false *8 6.198,3.833 6.51,3.99 0.313,0.156 10 false *b 5.75,4.063 6.063,4.219 0.313,0.156 10 false *c 5.708,4.354 6.021,4.51 0.313,0.156 10 false *d 4.771,4.115 4.938,4.292 0.167,0.177 10 true *a 4.104,2.396 4.271,2.573 0.167,0.177 10 false *a 3.26,2.344 3.427,2.521 0.167,0.177 10 false *a
*1 Rear Spring Hanger Reinforcement FR RH *2 Shackle Bracket
*3 Rear Spring Assembly *4 Spring Shackle
*5 Rear Floor Side Member Plate RH *6 Rear Side Member RH
*7 Rear Floor Cross Member No. 7 *8 Rear Suspension Arm Bracket RR RH No. 2
*a Left and right loads input to spring shackle (*4 in Illustration) *b Upside
*c Front *d Right




f.

Straight Ladder Structure

i.

A straight ladder structure that passes through the floor side members from the rear portion of the dash panel to the rear portion of the rear wheel house is used to ensure torsional rigidity of the floor.

Straight Ladder Structure (This illustration is an example only.)
V123567C01
5.333,1.25 5.917,0.667 5.917,0.667 6,0.667 true 6.052,0.573 6.365,0.729 0.313,0.156 10 false *a
*a Straight Ladder Structure - -




g.

Spot Welding

i.

An increased number of spot welding points are provided throughout the body, increasing the connectivity of the panels and providing superior driving stability (steering response and hand feedback).

Spot Welding (This illustration is an example only.)
V123568C01
5.271,1.042 5.854,0.458 5.854,0.458 5.938,0.458 true 5.979,0.375 6.292,0.531 0.313,0.156 10 false *a
*a Increased Number of Spot Welding Points - -




h.

Rear Driving Stability Brace

i.

Driving stability braces are provided near the rear suspension member installation areas to suppress body deformation, ensuring a superior feeling of grip.

Rear Driving Stability Brace (This illustration is an example only.)
V123569C01
4.417,1.333 5.333,0.417 5.333,0.417 5.417,0.417 true 4.917,1.5 5.833,0.583 5.833,0.583 5.917,0.583 true 1.25,3.25 1.333,3.25 1.333,3.25 1.917,2.667 true 0.5,2.833 0.583,2.833 0.583,2.833 1.5,1.917 true 3.833,1.167 4.75,0.25 4.75,0.25 4.833,0.25 true 3.667,3.583 3.583,3.583 3.583,3.583 2.417,2.417 true 5.958,0.5 6.396,0.688 0.438,0.188 10 false *1 (*a) 0.344,2.75 0.656,2.906 0.313,0.156 10 false *3 3.698,3.5 4.01,3.656 0.313,0.156 10 false *4 4.865,0.167 5.177,0.323 0.313,0.156 10 false *5 5.458,0.333 5.771,0.49 0.313,0.156 10 false *4 0.854,3.156 1.292,3.344 0.438,0.188 10 false *2 (*a)
*1 Rear Suspension Member Brace LH *2 Rear Suspension Member Brace RH
*3 Rear LH Spring Assembly *4 Rear Suspension Member
*5 Rear RH Spring Assembly - -
*a Driving Stability Brace - -




i.

Driving Stability Braces Near Engine Compartment

i.

Driving stability braces are provided near the engine compartment to efficiently strengthen rigidity, achieving superior steering response.

Driving Stability Braces Near Engine Compartment (This illustration is an example only.)
V123570C01
2.417,1.583 1.5,0.667 1.5,0.667 1.417,0.667 true 2.167,3.083 1.25,4 1.25,4 1.167,4 true 3.5,3.917 2.75,4.667 2.75,4.667 2.667,4.667 true 6.5,1 6.417,1 6.417,1 4.583,2.833 true 1.271,0.583 1.583,0.74 0.313,0.156 10 false *1 0.771,3.906 1.198,4.083 0.427,0.177 10 false *2 (*a) 6.542,0.917 6.979,1.094 0.438,0.177 10 false *3 (*a) 2.49,4.583 2.646,4.74 0.156,0.156 10 false *4
*1 Cooler Bracket *2 Side Rail Reinforcement Sub-assembly Rear RH
*3 Side Rail Reinforcement Sub-assembly Rear LH *4 Front Frame Assembly
*a Driving Stability Brace - -




j.

Structural Adhesive

i.

Panel connections are strengthened to enhance body torsional rigidity, ensuring superior driving stability. In addition to spot welding, structural adhesive* is used for each door opening. Panel connections are strengthened to enhance body torsional rigidity, providing superior driving stability.

HINT:

*: A Compared to conventional spot welding where panels are only connected at certain points, this adhesive is used together with welds to connect body surfaces, minimizing bending and warping to maximize rigidity.


Structural Adhesive (This illustration is an example only.)
V123571C01
0.49,5.458 0.802,5.615 0.313,0.156 10 false : *a
*a Structural Adhesive - -