Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2019.06
NM35X0E _51 Engine / Hybrid System _078342 CRUISE CONTROL _0379908 CRUISE CONTROL SYSTEM GE GENERAL F

CRUISE CONTROL  CRUISE CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The cruise control system is controlled by the ECM.


b.

On the models with diesel engine, the cruise control system performs control through the ECD system. Once the cruise control system is set to the desired vehicle speed, the fuel injection volume is adjusted automatically to maintain the vehicle speed without depressing the accelerator pedal. The ECM compares the actual vehicle speed and the set speed. If the vehicle speed is higher than the set speed, the ECM decreases the fuel injection volume by regulating the 4 injectors. If the vehicle speed is lower than the set speed, the ECM increases the fuel injection volume by regulating the 4 injectors.


c.

On the models with gasoline engine, the cruise control system performs control through the Electronic Throttle Control System-intelligent (ETCS-i). Once the cruise control system is set to the desired vehicle speed, the throttle valve position is adjusted automatically to maintain the vehicle speed without depressing the accelerator pedal. The ECM compares the actual vehicle speed and the set speed. If the vehicle speed is higher than the set speed, the ECM activates the throttle control motor in the throttle closing direction. If the vehicle speed is lower than the set speed, the ECM activates the throttle motor in the throttle opening direction.



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)