Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › from 2019.06
NM35X0E _58 Vehicle Interior _076624 DOOR LOCK _0387840 POWER DOOR LOCK CONTROL SYSTEM GE GENERAL F

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A power door lock control system, which uses a door lock motor to lock and unlock the doors, is used.


b.

This system is controlled by the main body ECU.


c.

The main body ECU outputs signals to the respective door lock motors.


d.

A 1-motion open operation, which simultaneously unlocks and opens the door when the inside handle is pulled, is provided for the driver door for when the door is opened from inside the vehicle.


e.

The customization function of the Global TechStream (GTS) or radio and display receiver assembly* makes it possible to adjust and change the settings for each function.

*: Models with multimedia system or navigation system




PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)