FUNCTION OF MAIN COMPONENTS
The main components in the power door lock control system have the following functions:
| Component | Outline | |
|---|---|---|
|
*1: Models without wireless door lock control system or entry and start system *2: 5-door models *3: Except wagon models *4: Wagon models *5: Models with multimedia system or navigation system |
||
| Instrument Panel Junction Block Assembly | D DR UNLOCK Relay | Inputs driver door unlock request signals from the main body ECU and operates the driver door lock motor. |
| L/D DR UNLOCK Relay | Inputs passenger door unlock request signals from the main body ECU and operates the door lock motors at the front passenger door, rear slide doors and back door. | |
| ALL DR LOCK Relay | Inputs door lock request signals from the main body ECU and operates the door lock motor of all doors. | |
| Front Door Lock with Motor Assembly (for Driver Door)
·
Door Lock Motor ·
Door Lock Position Switch ·
Door Lock Control Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. ·
Detects the condition of the built-in door lock control switch and outputs mechanical key lock/unlock request signals to the main body ECU. |
|
| Front Door Lock with Motor Assembly (for Front Passenger Door)
·
Door Lock Motor ·
Door Lock Position Switch ·
Door Lock Control Switch*1 |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. ·
Detects the condition of the built-in door lock control switch and outputs mechanical key lock/unlock request signals to the main body ECU.*1 |
|
| Slide Door Lock Remote Control Assembly (for Driver Side)*2
·
Door Lock Motor ·
Door Lock Position Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. |
|
| Slide Door Lock Remote Control Assembly (for Front Passenger Side)
·
Door Lock Motor ·
Door Lock Position Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. |
|
| Back Door Remote Control Assembly
·
Door Lock Motor ·
Door Lock Position Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. |
|
| Front Door Courtesy Light Switch Assembly (LH) | Outputs open/close signals for the front door LH to the main body ECU. | |
| Front Door Courtesy Light Switch Assembly (RH) | Outputs open/close signals for the front door RH to the main body ECU. | |
| Rear Door Courtesy Light Switch Assembly (for Driver Side)*2 | Outputs open/close signals for the rear door (driver side) to the main body ECU. | |
| Rear Door Courtesy Light Switch Assembly (for Front Passenger Side) | Outputs open/close signals for the rear door (front passenger side) to the main body ECU. | |
| Back Door Lock with Courtesy Light Switch Assembly
·
Courtesy Switch |
Outputs open/close signals for the back door to the main body ECU. | |
| Multiplex Network Master Switch Assembly
·
Door Control Switch |
Sends manual lock and unlock request signals to the main body ECU. | |
| Un-lock Warning Switch Assembly*3 | Detects whether or not the ignition key is inserted into the ignition key cylinder and sends this information to the main body ECU. | |
| Door Control Battery*4 | Supplies power to the power door lock control system when the auxiliary battery is damaged due to a collision. | |
| Main Body ECU (Multiplex Network Body ECU) | Drives all door lock motors in response to signals. | |
| Certification ECU (Smart Key ECU Assembly)*4 | Transmits the door lock/unlock request signals during the entry function to the main body ECU. | |
| Airbag ECU (Airbag Sensor Assembly)*4 | Outputs the collision detection information signals to the main body ECU. | |
| ECM*4 | Sends shift position signals to the main body ECU. | |
| Brake Actuator Assembly*4
·
Skid Control ECU |
Sends vehicle speed signals to the main body ECU. | |
| Combination Meter Assembly*4 | Sends vehicle speed signals to the main body ECU. | |
| Radio and Display Receiver Assembly*4, *5 | ·
Displays the settings screen. ·
Sends customization information to the main body ECU. |
|
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
| DLC3 | ·
The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions. ·
The Global TechStream (GTS) can be connected to change settings as desired by the user.*4 |
|
FUNCTION
The power door lock control system has the following functions:
| Function*1 | Outline |
|---|---|
| Manual Unlock | This function unlocks all the doors when the door control switch is operated to the unlock side. |
| Manual Lock | This function locks all the doors when the door control switch is operated to the lock side. |
| Key-linked Unlock | This function, which is linked with the door lock key cylinder, can unlock all the doors when an unlock operation is performed. |
| Key-linked Lock | This function, which is linked with the door lock key cylinder, can lock all the doors when a lock operation is performed. |
| Manual Unlock Prohibition | When the doors are all closed and are locked using a key-linked lock operation, wireless door lock operation*3 or entry lock operation*4, unlocking the vehicle using the door control switch is prohibited. |
| Collision Door Lock Release*2 | If the SRS airbag system has been activated, and the main body ECU has detected the activation signal output by the airbag ECU, the main body ECU unlocks all the doors. |
| Driver Door Opening-linked Automatic Door Unlock*2 | All the doors are automatically unlocked when the driver door is opened within 45 seconds of the ignition switch being turned from ON to ACC or off. |
| Shift-linked Automatic Door Unlock*2 | When the ignition switch is ON and the shift lever is moved to P position from a position other than P, all of the doors will be automatically unlocked. |
| Shift-linked Automatic Door Lock*2 | When the conditions listed below are met, this function causes all the doors to be automatically locked:
·
The ignition switch is changed from ACC or off to ON. ·
All the doors are closed. ·
The shift lever is moved out of the P position. ·
Any of the doors are in an unlocked state. |
| Speed Sensitive Automatic Door Lock*2 | When the conditions listed below are met, this function causes all the doors to be automatically locked:
·
Vehicle speed is higher than approximately 20 km/h (12 mph). ·
All the doors are closed. ·
Any of the doors is unlocked. |
| Key Confinement Prevention | When the key is inserted in the ignition key cylinder and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*5 |
| When the electrical key is inserted in the interior actuation area and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*4 | |
| IG ON Unlock*6 | This function unlocks all the doors when the ignition switch is ON. |
| Customization*2 | The on or off setting of some functions and settings can be performed using the Global TechStream (GTS) or radio and display receiver assembly*7. In addition, some functions are not available depending on the specification. For details, refer to the Repair Manual. |
*1: The default setting differs depending on the model.
*2: Wagon models
*3: Models with wireless door lock control system or entry and start system
*4: Models with entry and start system
*5: Models without entry and start system
*6: Models with IG ON unlock function
*7: Models with multimedia system or navigation system
DIAGNOSIS
If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.