Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2019.06
NM35X0E _58 Vehicle Interior _078717 METER / GAUGE / DISPLAY _0383098 METER / GAUGE SYSTEM DE DETAILS F

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  DETAILS  COMBINATION METER  


CONSTRUCTION


a.

Segment LCD Monitor Type Multi-information Display

i.

Display Item

·

The multi-information display is located at the right of the combination meter assembly.

Y226880E01
2.25,0.5 2.667,0.5 true 2.25,0.833 2.667,0.833 true 2.25,1.333 2.667,1.333 true 2.25,2 2.667,2 true 4.5,0.667 4.917,0.667 true 4.5,1.167 4.917,1.167 true 4.5,1.5 4.917,1.5 true 2.083,0.417 2.25,0.583 0.167,0.167 10 true *a 2.083,0.75 2.25,0.917 0.167,0.167 10 true *b 2.083,1.25 2.25,1.417 0.167,0.167 10 true *c 2.083,1.917 2.25,2.083 0.167,0.167 10 true *d 4.948,1.083 5.115,1.25 0.167,0.167 10 true *f 4.948,1.417 5.115,1.583 0.167,0.167 10 true *e 4.948,0.583 5.115,0.75 0.167,0.167 10 true *g

·

The multi-information display indicates as follows:

Area Item Outline

*1: Models with Toyota parking assist-sensor system

*2: Models with automatic transmission

*a Clock The current time is displayed.
*b Outside Temperature Gauge
·

The outside temperature is displayed.

·

When the outside temperature drops below 3°C (37°F), an ice warning indicator illuminates to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning indicator flashes 10 times, the indicator stays on. When the temperature reaches 5°C (41°F), the indicator goes off.


*c Toyota Parking Assist-sensor System Detection Display*1 The detection location and the approximate distance to the stationary object are displayed.
*d Cruise Information Display The following information can be displayed:
·

Odometer

·

Trip Meter A

·

Trip Meter B

·

Current Fuel Consumption

·

Total Average Fuel Consumption

·

Cruising Range

·

Average Vehicle Speed

·

Dimming Mode Display

·

Customization Mode Display*2


*e ECO Driving Indicator Zone Display*2 How much the vehicle is being driven in an eco-friendly manner is displayed with a bar graph.
*f Water Temperature Gauge The engine coolant temperature date are displayed with bar graph.
*g Shift Position Indicator*2 The current shift position is displayed.



ii.

Cruise Information Display

·

The cruise information display can be switched by operating the DISP and ODO/TRIP switch. The counter can be reset by pressing and holding the DISP and ODO/TRIP switch for 0.8 seconds or more.

Y226853C01
0.417,1 0.583,1.167 0.167,0.167 10 false *a 2.917,1 3.083,1.167 0.167,0.167 10 false *b 5.417,1 5.583,1.167 0.167,0.167 10 false *c 5.417,2.583 5.583,2.75 0.167,0.167 10 false *d 5.417,4.167 5.583,4.333 0.167,0.167 10 false *e 2.917,4.167 3.083,4.333 0.167,0.167 10 false *f 0.417,4.167 0.583,4.417 0.167,0.25 10 false *g 2.917,2.583 3.333,2.75 0.417,0.167 10 false *i (*A) 0.417,2.583 0.583,2.75 0.167,0.167 10 false *h
*A Models with Automatic Transmission - -
*a Odometer *b Trip Meter A
*c Trip Meter B *d Current Fuel Consumption
*e Total Average Fuel Consumption *f Cruising Range
*g Average Vehicle Speed *h Dimming Mode Display
*i Customization Mode Display
·

Eco Driving Indicator Setting


- -
V100135

The DISP and ODO/TRIP switch is operated for less than 0.8 seconds.
V100136

The DISP and ODO/TRIP switch is operated for 0.8 seconds or more to reset.
V100137

The DISP and ODO/TRIP switch is operated for 0.8 seconds or more to change active or inactive.
V100138

The DISP and ODO/TRIP switch is operated for 0.8 seconds or more to customize mode display.


Display Outline
Current Fuel Consumption
Y226854

·

Displays the value that has been calculated by the meter ECU, which is based on the driven distance and the fuel consumption volume (fuel injection amount signal from the ECM via CAN), provided that the ignition switch is turned ON.

·

The display updates every 0.5 seconds.


Total Average Fuel Consumption
Y226855

·

Displays the value that has been calculated by the meter ECU, which is based on the driven distance and the fuel consumption volume (fuel injection amount signal from the ECM via CAN) since the counter was reset.

·

The display updates every 10 seconds.


Cruising Range
Y226856

·

Displays the value that has been calculated by the meter ECU, which is based on the fuel consumption data that the meter ECU continuously monitors and stores in its memory, and the residual fuel volume data, provided that the ignition switch is turned ON.

·

The display updates every 10 seconds.


Average Vehicle Speed
Y226857

·

Displays the value that has been calculated by the meter ECU, which is based on the elapsed time and driven distance since the ignition switch was turned ON.

·

The display updates every 10 seconds.


Dimming Mode Display
Y226858

Displays the combination meter brightness.




b.

TFT LCD Monitor Type Multi-information Display

i.

Display Item

·

The multi-information display is located at the center of the combination meter assembly.

·

The multi-information display has 5 dedicated areas.

Y226881E01
4.917,0.583 5.083,0.75 0.167,0.167 10 false *a 4.917,1.125 5.083,1.292 0.167,0.167 10 false *b 4.917,1.615 5.083,1.781 0.167,0.167 10 false *c 4.917,2.75 5.083,2.917 0.167,0.167 10 true *d 4.917,4.167 5.083,4.333 0.167,0.167 10 false *e

·

The multi-information display shows the following information:

Area Item Outline

*1: Models with cruise control system

*2: Models with dynamic radar cruise control system

*3: Models with speed limiter system

*4: Models with lane departure alert system

*5: Models with road sign assist system

*6: Models with entry and start system

*7: Models with automatic transmission

*8: Models with iMT system

*9: Models with Toyota Safety Sense or navigation system

*10: Models with multimedia system or navigation system

*a Driving Support System Information The operation condition of the following items is displayed:
·

Cruise Control System*1

·

Dynamic Radar Cruise Control System*2

·

Speed Limiter System*3

·

Lane Departure Alert System*4

·

Road Sign Assist System*5


Vehicle Power Source State*6 The vehicle power source state is displayed.
*b Indicator When the illumination conditions are met, the following indicators illuminate:
·

LDA Indicator*4

·

Eco Driving Indicator*7

·

iMT Indicator*8


*c Clock The current time is displayed.
Outside Temperature Gauge
·

The outside temperature is displayed.

·

When the outside temperature drops below 3°C (37°F), an ice warning indicator illuminates to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning indicator flashes 10 times, the indicator stays on. When the temperature reaches 5°C (41°F), the indicator goes off.


Tab Icons Displays the tab selected.
*d Information
·

The following information can be displayed on the multi-information display by switching the tabs:

-

Fuel Economy Information Tab

-

Driving Assist System Information Tab*9

-

Audio Information Tab*10

-

Vehicle Information Tab

-

Settings Tab

-

Warning Message Tab


·

When a warning message request is received, an interrupt screen is displayed.


*e ODO/TRIP Meter
·

The odometer, trip meter A or trip meter B is displayed.

·

The item shown can be switched by pressing the ODO/TRIP switch.


Light Control Rheostat Meter panel luminance can be changed by using the ODO/TRIP switch.
Shift Position Indicator*7 The current shift position is displayed.

·

The each tab shows the following information:

Tab Outline

*1: Models with automatic transmission

*2: Models with dynamic radar cruise control system

*3: Models with lane departure alert system

*4: Models with road sign assist system

*5: Models with navigation system

*6: Models with tire inflation pressure display function

*7: Models without multimedia system or navigation system

*8: Models with Toyota Safety Sense

*9: Models with blind spot monitor system

*10: Models with Toyota parking assist-sensor system

*11: Models with RCTA function

*12: Models with dynamic radar cruise control with road sign assist

*13: Models with stop and start system or tire inflation pressure display function

Fuel Economy Information Tab The following items can be displayed:
·

Digital Speedometer Display

-

Vehicle Speed

-

Driving Range


·

Fuel Consumption Graph

-

Driving Range

-

Current Fuel Consumption

-

Fuel Consumption

(1)

After Start

(2)

After Reset

(3)

After Refuel



·

ECO Driving Indicator Zone Display*1

-

ECO Driving Indicator Zone Display

-

Driving Range



Driving Assist System Information Tab The operation condition of the following items is displayed.
·

Dynamic Radar Cruise Control System*2

·

Lane Departure Alert System*3

·

Road Sign Assist System*4

·

Navigation System*5


Audio Information Tab Audio information (status information) is displayed and the audio source and songs can be switched.
Vehicle Information Tab The following items can be displayed:
·

Drive Information

-

Trip (After Start)

(1)

Average Vehicle Speed

(2)

Distance Travelled

(3)

Elapsed Time


-

Total (After Reset)

(1)

Average Vehicle Speed

(2)

Distance Travelled

(3)

Elapsed Time



·

Tire Inflation Pressure Display*6


Settings Tab The following settings can be changed:
·

Clock*7

·

Lane Departure Alert System*2

·

Pre-Collision System*8

·

Blind Spot Monitor System*9

·

Toyota parking assist-sensor system*10

·

RCTA function*11

·

Road Sign Assist System*3

·

Dynamic Radar Cruise Control with Road Sign Assist*12

·

Vehicle Settings*13

·

Meter Settings


Warning Message Tab Warning messages about vehicle malfunctions are displayed.



ii.

Display Function Flow

·

The multi-information display can be switched as shown in the flow chart below:

Y226860E01
0.417,1.417 1.083,2.167 0.667,0.75 10 false Warning Display*c 1.667,1.365 3,2.031 1.333,0.667 10 false Suggestion/Operation Advisory Display 4.167,1 4.417,1.25 0.25,0.25 10 false Off 3.708,1.865 4.833,2.531 1.125,0.667 10 false Farewell Message Display 5.75,1.417 6.917,2.083 1.167,0.667 10 false Door Unlock Mode Display 5.26,4.74 6.51,5.406 1.25,0.667 10 false Opening Animation Display 5.229,6.833 6.563,7.167 1.333,0.333 10 false Information Display*c 0.583,5.167 2.667,5.5 2.083,0.333 10 false - Fuel Economy Information Tab 0.583,5.5 3.25,5.833 2.667,0.333 10 false - Driving Assist System Information Tab*A 0.583,5.833 2.333,6.167 1.75,0.333 10 false - Audio Information Tab*B 0.583,6.167 2.25,6.5 1.667,0.333 10 false - Vehicle Information Tab 0.583,6.5 1.75,6.833 1.167,0.333 10 false - Settings Tab 0.583,6.833 2.5,7.167 1.917,0.333 10 false - Warning Message Tab 5.333,5.833 6.5,6.167 1.167,0.333 10 false Diagnosis Display 2.521,1.083 2.688,1.25 0.167,0.167 10 false *a 1.177,0.677 1.344,0.844 0.167,0.167 10 false *a 5.479,1.667 5.646,1.833 0.167,0.167 10 false *a 5.281,1.385 5.448,1.552 0.167,0.167 10 false *b 3.302,1.479 3.469,1.646 0.167,0.167 10 false *b 1.365,1.469 1.531,1.635 0.167,0.167 10 false *b 3.292,2.167 3.458,2.333 0.167,0.167 10 false *b 4.198,1.583 4.365,1.75 0.167,0.167 10 false *e 0.5,4.833 1.833,5.167 1.333,0.333 10 false Information Display*d 4.969,5.615 5.135,5.781 0.167,0.167 10 false *a 4.583,5.896 4.75,6.063 0.167,0.167 10 false *b 4.177,6.906 4.344,7.073 0.167,0.167 10 false *b 4.969,6.615 5.135,6.781 0.167,0.167 10 false *a 1,3.479 2.583,3.813 1.583,0.333 10 false Ignition Switch ON to Off 5.167,3.479 6.75,3.813 1.583,0.333 10 false Ignition Switch Off to ON 0.167,4.25 1.75,4.583 1.583,0.333 10 false Ignition Switch ON 0.167,0.167 1.75,0.5 1.583,0.333 10 false Ignition Switch Off

*A Models with Toyota Safety Sense or Navigation System
*B Models with Multimedia System or Navigation System
*a Conditions are not met.
*b Conditions are met.
*c If there are multiple display requests, items will be displayed in sequence.
*d Item or display is selected by operating the steering pad switch assembly.
*e ODO display is displayed for a certain period of time after the ignition switch is turned off.



iii.

Display Tab Operation

·

The information currently displayed can be switched using the left/right switch of the steering pad switch assembly.

Y226883C01
0.833,2.417 1.083,2.583 0.25,0.167 10 false *1 4.583,2.417 5,2.583 0.417,0.167 10 false *2 (*A) 4.583,4.948 5,5.115 0.417,0.167 10 false *3 (*B) 4.583,7.5 4.833,7.667 0.25,0.167 10 false *4 0.833,4.948 1.083,5.115 0.25,0.167 10 false *6 0.167,7.583 0.333,7.75 0.167,0.167 10 false *a 0.833,7.5 1.083,7.667 0.25,0.167 10 false *5
*A Models with Toyota Safety Sense or Navigation System *B Models with Multimedia System or Navigation System
*1 Fuel Economy Information Tab *2 Driving Assist System Information Tab
*3 Audio Information Tab *4 Vehicle Information Tab
*5 Settings Tab *6 Warning Message Tab
*a The illustration shown is example only. The illustration may differ from the actual vehicle screen. - -
V100135

Left switch operation
V100136

Right switch operation




iv.

Fuel Economy Information

·

The fuel economy information shows vehicle information such as vehicle speed, drivable range and fuel consumption.

·

The fuel economy information can be switched using the up/down switch on the steering pad switch assembly.

Y226884C01
0.833,2.583 1,2.75 0.167,0.167 10 false *1 4.583,2.583 4.75,2.75 0.167,0.167 10 false *2 2.75,5.333 3.167,5.5 0.417,0.167 10 false *3 (*A) 0.167,5.583 0.333,5.75 0.167,0.167 10 false *a
*A Models with Automatic Transmission - -
*1 Digital Speedometer Display *2 Fuel Consumption Graph
*3 ECO Driving Indicator Zone Display - -
*a The illustration shown is an example only. The illustration may differ from the actual vehicle screen. - -
V100135

Up Switch Operation
V100136

Down Switch Operation




v.

Driving Assist System Information

·

The driving assist system information shows operation condition of the driving support system or navigation system.

·

The driving assist system information can be switched using the up/down switch on the steering pad switch assembly.

Y226885C01
0.833,2.417 1.25,2.583 0.417,0.167 10 false *1 (*A) 4.583,2.417 5.083,2.583 0.5,0.167 10 false *2 (*B) 0.167,2.583 0.333,2.75 0.167,0.167 10 false *a
*A Models with Toyota Safety Sense *B Models with Navigation System
*1 Driving Support System Information *2 Navigation System Information
*a The illustration shown is an example only. The illustration may differ from the actual vehicle screen. - -
V100135

Up Switch Operation
V100136

Down Switch Operation




vi.

Vehicle Information

·

The vehicle information shows drive information such as the average vehicle speed, distance travelled, elapsed time and tire inflation pressure display.

·

The vehicle information can be switched using the up/down switch on the steering pad switch assembly.

Y246417C01
0.833,2.417 1.25,2.583 0.417,0.167 10 false *1 4.583,2.417 5.083,2.583 0.5,0.167 10 false *2 (*A) 0.167,2.583 0.333,2.75 0.167,0.167 10 false *a
*A Models with Tire Inflation Pressure Display Function - -
*1 Drivie Information *2 Tire Inflation Pressure Display
*a The illustration shown is an example only. The illustration may differ from the actual vehicle screen. - -
V100135

Up Switch Operation
V100136

Down Switch Operation




vii.

Setting Function

·

The items displayed on the multi-information display can be customized.

·

The following items can be selected on the information setting screen.

Clock (Models without Multimedia System or Navigation System)
Item Available Setting
On the hour setting Sets the minute display to "00" via the enter switch on the steering pad switch.
HINT:
·

When the current minute counter is between 01 and 29, the hour counter does not change.

·

When the current minute counter is between 30 and 59, 1 hour is added to the hour counter.



Clock Select to adjust clock of the combination meter.

Lane Departure Alert (LDA) System (Models with Lane Departure Alert System )
Item Available Setting

*: Models with yaw assist function

LDA Yaw Assist* Setting for yaw assist can be set to on/off:
·

ON

·

OFF


Alert Warning method can be changed:
·

Steering wheel vibration (Icon is displayed)

·

Buzzer (Icon is displayed)


Sensitivity Sensitivity of alert system can be changed:
·

High (Icon is displayed)

·

Standard (Icon is displayed)


Sway Warning Sway warning function can be set to on/off:
·

ON

·

OFF


Sway Sensitivity Sway warning sensitivity can be selected:
·

High (Icon is displayed)

·

Standard (Icon is displayed)

·

Low (Icon is displayed)



Pre-Collision System (PCS) (Models with Toyota Safety Sense)
Item Available Setting
PCS The pre-collision system can be set to on/off:
·

ON

·

OFF


Sensitivity Pre-collision system warning sensitivity can be selected:
·

Early (Icon is displayed)

·

Middle (Icon is displayed)

·

Late (Icon is displayed)



Blind Spot Monitor (BSM) System (Models with Blind Spot Monitor System)
Item Available Setting
BSM The blind spot monitor system can be set to on/off:
·

ON

·

OFF


Brightness Brightness of the outer rear view mirror indicator light can be changed:
·

Bright (Icon is displayed)

·

Dim (Icon is displayed)



Toyota Parking Assist-sensor System (Models with Toyota Parking Assist-sensor System)
Item Available Setting
Toyota Parking Assist-sensor System Volume The volume of the warning buzzer can be selected:
·

1 (Quiet) (Icon is displayed)

·

2 (Medium) (Icon is displayed)

·

3 (Loud) (Icon is displayed)



Rear Cross Traffic Alert (RCTA) Function (Models with RCTA Function)
Item Available Setting
RCTA The RCTA function can be set to on/off:
·

ON

·

OFF


Volume The volume of the warning buzzer can be selected:
·

1 (Quiet) (Icon is displayed)

·

2 (Medium) (Icon is displayed)

·

3 (Loud) (Icon is displayed)



Road Sign Assist (RSA) System (Models with Road Sign Assist System)
Item Available Setting

*1: Destination package for Russia

*2: Models for Australia or New Zealand

RSA The road sign assist system can be set to on/off:
·

ON

·

OFF


Notification Method Notification method can be selected:
·

Above Speed Limit:

(a)

No Notification

(b)

Only visual

(c)

Visual and Audio



Notification method can be selected:*1
·

Overtaking:

(a)

No Notification

(b)

Only visual

(c)

Visual and Haptic



·

Others:

(a)

No Notification

(b)

Only visual

(c)

Visual and Audio



Notification Level Excess speed notification level can be selected:*2
·

5 km/h

·

3 km/h

·

1 km/h


Excess speed notification level can be selected:*1
·

10 km/h (5 mph)

·

5 km/h (3 mph)

·

2 km/h (1 mph)



Dynamic Radar Cruise Control with Road Sign Assist (Models with Dynamic Radar Cruise Control with Road Sign Assist)
Item Available Setting
Dynamic Radar Cruise Control with Road Sign Assist The dynamic radar cruise control with road sign assist can be set to on/off:
·

ON

·

OFF



Vehicle Settings
Item Available Setting

*: Models with stop and start system

Stop and Start System* Duration The idling stop time of stop and start system can be selected:
·

Standard

·

Extended



Meter Settings
Item Available Setting

*1: Models with automatic transmission

*2: Models with multimedia system or navigation system

*3: Models with navigation system

*4: Models with voice recognition system

*5: Models with stop and start system

Language The language used on the multi-information display can be selected:
·

Arabic

·

Thai

·

German

·

English

·

Spanish

·

French

·

Italian

·

Dutch

·

Portuguese

·

Portuguese in Brazil

·

Russian

·

Finnish

·

Turkish

·

Ukrainian

·

Hebrew

·

Malay

·

Indonesian

·

Korean

·

Traditional Chinese

·

Vietnamese


HINT:

Available display languages differ by destination


Units The unit displayed on the multi-information display can be selected:
·

km (km/L)

·

km (L/100 km)

·

miles (MPG)


HINT:

Available display units differ by destination


Eco Driving Indicator*1 The Eco driving indicator can be set to on/off:
·

ON

·

OFF


Fuel Economy Information Tab Fuel Economy The fuel economy type can be selected:
·

Trip Average

·

Total Average

·

Tank Average


Audio Information Tab*2 The audio information tab can be set to on/off:
·

ON

·

OFF


Vehicle Information Tab Drive Info Type The drive information type can be selected:
·

Trip

·

Total


Drive Info Items The upper and lower of drive information items can be selected:
·

Average Speed

·

Distance

·

Elapsed Time


Pop-Up Display The following displays that appear as soon as the set conditions are met can be switched to on/off:
·

Turn-by-turn Navigation*3

·

Telephone*2

·

Audio Operation*2

·

Volume Operation*2

·

Voice Control*4

·

Duration*5

·

Status*5

·

Adjust Brightness


Multi-information Display OFF Multi-information display is turned off.
Default Settings The set items can be initialized.



viii.

Interruption Display

·

When a warning is necessary, the warning message interrupts the current display on the multi-information display.

·

A warning message is displayed via an interrupt display when a vehicle malfunction occurs to warn the driver. Also, an advice message is displayed via an interrupt display depending on the situation, such as when the driver must proceed with caution.

·

The buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

·

The intersection guidance*1, telephone display*2, audio operation and volume operation displays*2 are linked with the multimedia system or navigation system*2 and displayed via an interrupt display.

*1: Models with navigation system

*2: Models with multimedia system or navigation system



Engine System
1.

The combination meter assembly displays the following messages based on signals received from the ECM.

Message Buzzer

*1: Models with 1GD-FTV engine

*2: Models with automatic transmission and models with VSC

REPLACE FUEL FILTER*1 -
Release Accelerator
(and image display)*2
Sounds
Check Engine Visit Your Dealer Sounds
Check Engine Reduced Engine Power Visit Your Dealer Sounds
Reduced Engine Power Visit Your Dealer Sounds
Engine Maintenance Required Visit Your Dealer Sounds
Engine Coolant Temp High Stop in a Safe Place See Owner's Manual
(and image display)
Sounds
Drive-Start Control Malfunction Visit Your Dealer
(and image display)*2
Sounds
Brake Override Malfunction Visit Your Dealer
(and image display)
Sounds
Accelerator and Brake Pedals Pressed Simultaneously
(and image display)
-

2.

The combination meter assembly displays the following messages based on signals received from the engine oil pressure switch assembly.

Message Buzzer
Oil Pressure Low Stop in a Safe Place See Owner's Manual
(and image display)
Sounds

3.

The combination meter assembly displays the following messages based on signals received from the sedimenter level warning switch.

Message Buzzer

*: Models with 1GD-FTV engine

Water Accumulation in Fuel Filter See Owner's Manual* Sounds

4.

The combination meter assembly displays the following messages based on signals received from the engine oil level sensor.

Message Buzzer
Engine Oil Level Low Add or Replace -

5.

The combination meter assembly displays the following messages based on signals received from the fuel sender gauge assembly.

Message Buzzer
Fuel Low -


Diesel Particulate Filter (DPF) System (Models with DPF System)
1.

The combination meter assembly displays the following messages based on signals received from the ECM.

Message Buzzer
DPF Full See Owner's Manual
(and image display)
-
DPF Manual Regeneration Available
(and image display)
-
DPF Full Manual Regeneration Required See Owner's Manual
(and image display)
-
Manual Regeneration in Process Keep Flammables Away from Vehicle
(and image display)
-
Manual Regeneration Unavailable DPF Normal
(and image display)
-
DPF Regeneration in Process
(and image display)
-
DPF Full Visit Your Dealer
(and image display)
-


UREA Selective Catalytic Reduction (SCR) System (Models with UREA SCR System)
1.

The combination meter assembly displays the following messages based on signals received from the urea pump control ECU via the ECM.

Message Buzzer

*1: Gross Vehicle Mass (GVM): 3.5 t or less

*2: GVM: exceeds 3.5 t

AdBlue Level Low Fill up AdBlue in ***km See Owner's Manual
AdBlue Level Low Fill up AdBlue in ***mile See Owner's Manual
-
AdBlue Level Low Fill up AdBlue in ***km See Owner's Manual
AdBlue Level Low Fill up AdBlue in ***mile See Owner's Manual
Sounds
AdBlue Level Low No Start in ***km Fill up AdBlue See Owner's Manual
AdBlue Level Low No Start in ***miles Fill up AdBlue See Owner's Manual
Sounds
AdBlue Empty Unable to Restart Engine Fill up AdBlue See Owner's Manual Sounds
Emissions too High Check AdBlue Visit Your Dealer*1 Sounds
Emissions too High No Start in ***km Check AdBlue Visit Your Dealer*1
Emissions too High No Start in ***miles Check AdBlue Visit Your Dealer*1
Sounds
Emissions too High Unable to Restart Engine Check AdBlue Visit Your Dealer*1 Sounds
Fill up AdBlue in ***km See Owner's Manual
Fill up AdBlue in ***miles See Owner's Manual
-
AdBlue Dosing Malfunction Check AdBlue Visit Your Dealer*2 Sounds
AdBlue Dosing Malfunction No start in ***km Check AdBlue Visit Your Dealer*2
AdBlue Dosing Malfunction No start in ***miles Check AdBlue Visit Your Dealer*2
Sounds
AdBlue Dosing Malfunction Unable to Restart Engine Check AdBlue Visit Your Dealer*2 Sounds
Incorrect AdBlue Detected Check AdBlue Visit Your Dealer*2 Sounds
Incorrect AdBlue Detected No Start in ***km Check AdBlue Visit Your Dealer*2
Incorrect AdBlue Detected No Start in ***miles Check AdBlue Visit Your Dealer*2
Sounds
Incorrect AdBlue Detected Unable to Restart Engine Check AdBlue Visit Your Dealer*2 Sounds


Cruise Control System (Models with Cruise Control System)
1.

The combination meter assembly displays the following messages based on signals received from the ECM.

Message Buzzer
Cruise Control Malfunction Visit Your Dealer Sounds


Dynamic Radar Cruise Control System (Models with Dynamic Radar Cruise Control System)
1.

The combination meter assembly displays the following messages based on signals received from the ECM.

Message Buzzer
Dynamic radar cruise control proximity warning
(image display)
Sounds
Radar Cruise Control Unavailable See Owner's Manual Sounds
Radar Cruise Control Unavailable Sounds
Cruise Control Malfunction Visit Your Dealer Sounds
Radar Cruise Active Please Pay Attention to Other Vehicles -
Dynamic radar cruise control system status
(image display)
-


Speed Limiter System (Models with Speed Limiter System)
1.

The combination meter assembly displays the following messages based on signals received from the ECM.

Message Buzzer
Speed Limiter Malfunction Visit Your Dealer Sounds


Lane Departure Alert System (Models with Lane Departure Alert System)
1.

The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

Message Buzzer

*: Models with yaw assist function

Lane departure alert
(image display)
Sounds
LDA Malfunction Visit Your Dealer Sounds
LDA Unavailable Sounds
Lane Departure Alert Turned On Yaw Assist Active* -
Lane Departure Alert Turned On Yaw Assist Inactive* -
LDA Unavailable at Current Speed -
Lane departure alert system status
(image display)
-
Would You Like to Take a Break?
(and image display)
Sounds


Road Sign Assist System (Models with Road Sign Assist System)
1.

The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

Message Buzzer
RSA Malfunction Visit Your Dealer Sounds


Stop and Start System (Models with Stop and Start System)
1.

The combination meter assembly displays the following messages based on signals received from the engine stop and start ECU.

Message Buzzer

*: Models with manual transmission

Stop & Start System Active Shift to N and Press Clutch to Restart* Sounds
Stop & Start System Malfunction Visit Your Dealer Sounds


Automatic Transmission System (Models with Automatic Transmission)
1.

The combination meter assembly displays the following messages based on signals received from the ECM.

Message Buzzer
High Transmission Fluid Temp See Owner's Manual Sounds


Manual Transmission System (Models with iMT System)
1.

The combination meter assembly displays the following messages based on signals received from the ECM.

Message Buzzer
Press the Accelerator Pedal when Starting Off -


Tire Pressure Warning System (Models with Tire Pressure Warning System)
1.

The combination meter assembly displays the following messages based on signals received from the tire pressure warning ECU and receiver via the main body ECU.

Message Buzzer
TPWS Malfunction Visit Your Dealer -
Setting Tire Pressure Warning System -
Tire Pressure Recalibrating Please Wait until Complete -
Tire Pressure Low Check Tire
(and image display)
-


Brake System
1.

The combination meter assembly displays the following messages based on signals received from the skid control ECU.

Message Buzzer

*1: Models with Toyota Safety Sense

*2: Models with VSC

Braking Power Low Stop in a Safe Place See Owner's Manual Sounds
Antilock Brake System Malfunction Visit Your Dealer Sounds
Secondary Collision Brake system Malfunction Visit Your Dealer*1 Sounds
Traction Control Turned OFF*2 Sounds

2.

The combination meter assembly displays the following messages based on signals received from the main body ECU.

Message Buzzer
Release Parking Brake Sounds


Toyota Parking Assist-sensor System (Models with Toyota Parking Assist-sensor System)
1.

The combination meter assembly displays the following messages based on signals received from the clearance warning ECU assembly.

Message Buzzer
Toyota parking assist-sensor system detection display
(image display)
-
Toyota parking assist-sensor system temporary mute display -
Parking Assist Malfunction Visit Your Dealer Sounds
Parking Assist Unavailable Please Clean Parking Assist Sensor Sounds
Parking Assist Unavailable Sounds


Blind Spot Monitor System (Models with Blind Spot Monitor System)
1.

The combination meter assembly displays the following messages based on signals received from the blind spot monitor sensor LH.

Message Buzzer
Rear Cross Traffic Alert Malfunction Visit Your Dealer Sounds
Rear Cross Traffic Alert Unavailable Sounds
Blind Spot Monitor Unavailable Sounds
Blind Spot Monitor Malfunction Visit Your Dealer Sounds


Entry and Start System (Models with Entry and Start System)
1.

The combination meter assembly displays the following messages based on signals received from the main body ECU and certification ECU.

Message Buzzer
Push and Hold Engine Switch for Emergency Stop Sounds
Shift to N and Push ENGINE Switch to Restart Sounds
Engine Stopped Shift into P Position Sounds
Engine Stopped Stop in a Safe Place Sounds
Shift to P when Parked Sounds
Auto Power OFF to Conserve Battery -
Key Not Detected Check Key Location Sounds
Smart Entry & Start System Malfunction See Owner's Manual Sounds
Turn Power OFF Sounds
Key Detected in Vehicle -
Key Detected in Vehicle Sounds
Press Brake Pedal and Touch Engine Switch with Key Sounds
Not Ready to Drive Press Brake and Push Engine Start Switch
(and image display)
-
Press Brake and Push Engine Start Switch Sounds
Push Engine Switch while Turning Steering Wheel in Either Direction Sounds
Key Battery Low Replace Key Battery Sounds
A New Key has been Registered Contact Your Dealer for Details -
Press Brake Pedal and Push Engine Switch to Start
(and image display)
-


Supplemental Restraint System (SRS) Airbag System (Models with SRS Airbag System)
1.

The combination meter assembly displays the following messages based on signals received from the airbag ECU assembly.

Message Buzzer
SRS Airbag System Malfunction Visit Your Dealer Sounds


Pre-Collision System (Models with Toyota Safety Sense)
1.

The combination meter assembly displays the following messages based on signals received from the forward recognition camera.

Message Buzzer
ADJUSTING FORWARD CAMERA -
ERROR ADJUSTING FRONT RADAR BEAM -
ADJUSTING FRONT RADAR BEAM VERTICAL -
ADJUSTING FRONT RADAR BEAM HORIZONTAL -
CHECKING PCS BRAKE -
BRAKE! Sounds
Front Camera Unavailable -
Front Camera Unavailable See Owner's Manual -
Pre-Collision System Malfunction Visit Your Dealer Sounds
VSC Turned OFF Pre-Collision Brake System Unavailable -
Pre-Collision System Unavailable -
Pre-Collision System Unavailable Clean Sensor -
Pre-Collision System OFF -


Power Window System (Wagon Models)
1.

The combination meter assembly displays the following messages based on signals received from the main body ECU.

Message Buzzer
Window Open -


Door
1.

The combination meter assembly displays the following messages based on signals received from the main body ECU.

Message Buzzer
Driver door open
(image display)
-
Front passenger door open
(image display)
Rear slide door LH open*1
(image display)
Rear slide door RH open*1
(image display)
Hood open*2
(image display)
Back door open
(image display)
Driver door open while driving*3
(image display)
Sounds
Front passenger door open while driving*3
(image display)
Rear slide door LH open while driving*1, *3
(image display)
Rear slide door RH open while driving*1, *3
(image display)
Hood open while driving*2, *3
(image display)
Back door open while driving*3
(image display)

HINT:

*1: The rear door on the driver side is only displayed for 5-door models.

*2: Models with theft deterrent system

*3: If the vehicle has reached a speed of 5 km/h (3 mph).



Lighting System
1.

The combination meter assembly displays the following messages based on signals received from the main body ECU.

Message Buzzer

*1: Models with automatic high beam or automatic headlight beam level control system

*2: Models with automatic high beam

Turn Lights OFF Sounds
Headlight System Malfunction Visit Your Dealer*1 Sounds
To Activate Automatic High Beam, Switch Headlights to High Beam*2 -


Others
1.

The combination meter assembly displays the following messages based on signals.

Message Buzzer

*1: Models with automatic transmission

*2: Models without entry and start system

*3: Models with stop and start system

*4: Models for G.C.C. countries or high roof models for Thailand

Engine Stopped Shift into P Position*1, *2 Sounds
Engine Stopped Stop in a Safe Place*2 Sounds
Not Ready to Drive*2 -
Engine Stopped Press Brake Firmly to Restart*3 -
Speed Limit Exceeded*4 Sounds
Roads may be Icy Drive with Care
(and image display)
Sounds


Reminder Service/Operation Advisory Function (Wagon Models)
1.

The reminder service/operation advisory function displays the following setting change reminders and operation support displays via an interrupt display when conditions are met according to the vehicle condition and various switch operations.

Reminder Details Display Condition Multi-information Display Choice
Headlight illumination reminder When system determines vehicle is being driven at night with headlights turned off Turn ON Headlamps -
Turn headlights off after stopping reminder (when light control switch is set to HEAD) When headlights are illuminated after ignition switch is turned off (light control switch is in HEAD position) Headlamps Are ON -
Turn headlights off after stopping reminder (when light control switch is set to AUTO) When headlights are illuminated after ignition switch is turned off (light control switch is in AUTO position) Headlamps Are ON
Turn Headlamps OFF?
·

Yes

·

No


Close door windows during wiper operation reminder If any door window is open when attempting to operate wipers Close Open Windows?
·

Yes

·

No






c.

Buzzer

i.

The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

Priority Item

*1: Models with manual transmission

*2: Models for G.C.C. countries

*3: Models with Toyota Safety Sense

*4: Models with entry and start system

*5: Models without entry and start system

*6: Models with dynamic radar cruise control system

*7: Models with lane departure alert system

*8: Models with front center seat belt reminder system

*9: Models with rear seat belt warning function

*10: Except models for G.C.C countries

*11: Models with road sign assist system

*12: Models with automatic transmission

*13: Models with stop and start system

*14: Models with TFT LCD monitor type multi-information display

*15: Models with segment LCD monitor type multi-information display

*16: Models for G.C.C. countries or high roof models for Thailand

*17: Models with speed limiter system

*18: Models with 1GD-FTV engine

*19: Models with Diesel Particulate Filter (DPF) system

1 Reverse for 6-speed Manual Transmission Warning Buzzer (Once)*1
2 Driver Seat Belt Warning Buzzer (Maximum 5 Times)*2
3 Emergency Back Door Warning Buzzer (Continuous)
4 Pre-Collision System (PCS) Warning Buzzer (Intermittent)*3
5 Engine Start while Driving Notice Buzzer (Continuous)*4
6 Engine Switch Operation while Driving Warning Buzzer (Intermittent)*4
7 Key Reminder Buzzer (Intermittent)*5
8 Vehicle Proximity Warning Buzzer (Intermittent)*6
9 Pedestrian Warning/Vehicle Distance Time Alert Buzzer (Intermittent)*3
10 Lane Departure Alert System Warning Buzzer (Intermittent)*7
11 Unexpected Vehicle Motion Warning Buzzer (Continuous)
12 Unexpected Vehicle Motion Warning Buzzer (Intermittent)
13 Brake Fluid Low Warning Buzzer (Intermittent)
14 Engine Oil Pressure Warning Buzzer (Intermittent)
15 Driver Seat Belt Warning Buzzer (Once)*2
16 Front Center Seat Belt Warning Buzzer (Once)*2, *8
17 Front Passenger Seat Belt Warning Buzzer (Once)*2
18 Rear Passenger Seat Belt Warning Buzzer (Once)*2, *9
19 Seat Belt Warning Level 2 Buzzer (Intermittent)
20 Seat Belt Warning Level 1 Buzzer (Intermittent)*2
21 Rear Seat Belt Warning Level 1 Buzzer (Intermittent)*9, *10
22 Seat Belt Warning Level 1 Buzzer (Intermittent)*10
23 Road Sign Assist System Warning Buzzer (Once)*11
24 Engine Coolant Temperature Warning Buzzer (Once)
25 Door Open when Shift Position not in P Warning Buzzer (Continuous)*12
26 Stop and Start System Warning Buzzer (Continuous)*13
27 Entry and Start System Warning Buzzer 1 (Intermittent)*4
28 Brake System Temperature Rise Warning/Active Test Buzzer (Intermittent)
29 Brake Pedal Operation Request Buzzer (Once)*6
30 Entry and Start System Warning Buzzer 2 (Intermittent: Maximum 9 Times)*4
31 Entry and Start System Warning Buzzer (Once)*4
32 Multi-information Display Warning Buzzer (Once)*14
33 Engine Malfunction Information Buzzer (Once)*15
34 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning Buzzer (Twice)*6
35 Low Speed Zone Leading Vehicle Lost Warning Buzzer (Fourth)*6
36 Immobiliser Certification Reminder Buzzer (Once)*4
37 Speed Limit Warning Buzzer (Intermittent)*16
38 Speed Limiter Buzzer (Intermittent)*17
39 Parking Brake Engaged Warning Buzzer (Intermittent)
40 Door Open while Driving Warning Buzzer (Intermittent)
41 Vehicle Sway Warning Buzzer (Twice)*7
42 Shift Reject Buzzer (Twice)*12
43 Fuel Sedimenter Warning Buzzer (Continuous)*18
44 Diesel Particulate Filter (DPF) Buzzer (Intermittent)*19
45 Light Reminder Buzzer (Continuous)
46 Pre-collision Brake Assist Notification Buzzer (Intermittent)*3
47 PCS Warning Notification Buzzer (Intermittent)*3
48 Brake Inspections Standby Mode Notification Buzzer (Intermittent)*3
49 Radar Axis Adjustment Complete Notification Buzzer (Intermittent)*3
50 Camera Axis Adjustment Complete Notification Buzzer (Intermittent)*3
51 Pre-collision Braking Notification Buzzer (Continuous)*3
Return from Brake Inspection Mode Notification Buzzer (Continuous)*3
Radar Axis Adjustment Incomplete Notification Buzzer (Continuous)*3
Camera Axis Adjustment Start Notification Buzzer (Continuous)*3
52 Turn Signal/Hazard Warning Operation Buzzer (Intermittent)



d.

Eco Driving Indicator and ECO Driving Indicator Zone Display (Models with Automatic Transmission)

i.

The operating diagram of Eco driving indicator is as follows:

Y129637E02
0.833,0.271 1.323,0.698 0.49,0.427 10 false Large 0.813,2.906 1.302,3.333 0.49,0.427 10 false Small 0.479,1.635 1.406,1.979 0.927,0.344 10 false Acceleration 3.688,0.865 6.458,1.208 2.771,0.344 10 false Eco Driving Indicator will not Turn On 2.74,2.417 5.094,2.708 2.354,0.292 10 false Eco Driving Indicator Turns On* 3.417,3.135 4.344,3.479 0.927,0.344 10 false Vehicle Speed 1.76,3.135 2.188,3.448 0.427,0.313 10 false Slow 5.719,3.135 6.146,3.448 0.427,0.313 10 false Fast 0.115,3.448 3.094,3.792 2.979,0.344 10 false *: Will not turn on while the vehicle is stopped.


ii.

When the ECM, using information (such as vehicle speed, accelerator pedal depressed volume, engine speed signal (engine r/min data), and so on), calculates that the vehicle is driven in an Eco-friendly manner, it turns on Eco driving indicator and shows the bar graph of ECO driving indicator zone display within zone of Eco driving.


iii.

The following table shows the operation of Eco driving indicator and ECO driving indicator zone display in different driving conditions:

Segment LCD Monitor Type Multi-information Display
Driving Condition Eco Driving Indicator ECO Driving Indicator Zone Display
While Stopped Turns off
Y226886

While Eco Driving Turns on
Y226887

While Non-eco Driving Turns off
Y226888

When any of the following conditions is met, operation is stopped.
·

Ignition switch off

·

Engine stopped

·

Shift position is not D.

·

The vehicle is being driven at a speed of approximately 130 km/h (81 mph) or higher.


Turns off
Y226886


TFT LCD Monitor Type Multi-information Display
Driving Condition Eco Driving Indicator ECO Driving Indicator Zone Display
While Stopped Turns off
Y226889

While Eco Driving Turns on
Y226890

While Non-eco Driving Turns off
Y226891

When any of the following conditions is met, operation is stopped.
·

Ignition switch off

·

Engine stopped

·

Shift position is not D.

·

The vehicle is being driven at a speed of approximately 130 km/h (81 mph) or higher.


Turns off
Y226889