FUNCTION OF MAIN COMPONENTS
The main components in the wireless door lock control system have the following functions:
| Component | Outline | |
|---|---|---|
|
*1: Except wagon models *2: Wagon models *3: Models with power slide door system *4: Models with wireless door lock buzzer function *5: 5-door models *6: Models with multimedia system or navigation system |
||
| Door Control Transmitter Assembly*1 | When a driver pushes the lock button, unlock button or power slide door button*3 on the key, the key outputs a request signal. | |
| Electrical Key (Electrical Key Transmitter Sub-assembly)*2 | ||
| Door Control Receiver | ·
Receives a lock/unlock or power slide door operation signal from the door control transmitter assembly and sends this information to the main body ECU.*1 ·
Receives a lock/unlock or power slide door operation signal from the electrical key and sends this information to the certification ECU.*2 |
|
| Wireless Door Lock Buzzer | ·
Sounds as an answer back for wireless lock/unlock to inform the driver.*4 ·
Sounds to inform the driver when warning conditions are met. |
|
| Instrument Panel Junction Block Assembly | D DR UNLOCK Relay | Inputs driver door unlock request signals from the main body ECU and operates the driver door lock motor. |
| L/D DR UNLOCK Relay | Inputs passenger door unlock request signals from the main body ECU and operates the door lock motors at the front passenger door, rear slide doors and back door. | |
| ALL DR LOCK Relay | Inputs door lock request signals from the main body ECU and operates the door lock motor of all doors. | |
| Front Door Lock with Motor Assembly (for Driver Door)
·
Door Lock Motor ·
Door Lock Position Switch ·
Door Lock Control Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. ·
Detects the condition of the built-in door lock control switch and outputs mechanical key lock/unlock request signals to the main body ECU. |
|
| Front Door Lock with Motor Assembly (for Front Passenger Door)
·
Door Lock Motor ·
Door Lock Position Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. |
|
| Slide Door Lock Remote Control Assembly (for Driver Side)*5
·
Door Lock Motor ·
Door Lock Position Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. |
|
| Slide Door Lock Remote Control Assembly (for Front Passenger Side)
·
Door Lock Motor ·
Door Lock Position Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. |
|
| Back Door Remote Control Assembly
·
Door Lock Motor ·
Door Lock Position Switch |
·
Rotates the built-in door lock motor to lock and unlock the doors. ·
Uses the built-in door lock position switch to detect whether the doors are locked or unlocked and outputs the result to the main body ECU. |
|
| Front Door Courtesy Light Switch Assembly (LH) | Outputs open/close signals for the front door LH to the main body ECU. | |
| Front Door Courtesy Light Switch Assembly (RH) | Outputs open/close signals for the front door RH to the main body ECU. | |
| Rear Door Courtesy Light Switch Assembly (for Driver Side)*5 | Outputs open/close signals for the rear door (driver side) to the main body ECU. | |
| Rear Door Courtesy Light Switch Assembly (for Front Passenger Side) | Outputs open/close signals for the rear door (front passenger side) to the main body ECU. | |
| Back Door Lock with Courtesy Light Switch Assembly
·
Courtesy Switch |
Outputs open/close signals for the back door to the main body ECU. | |
| Un-lock Warning Switch Assembly*1 | Detects whether or not the ignition key is inserted into the ignition key cylinder and sends this information to the main body ECU. | |
| Main Body ECU (Multiplex Network Body ECU) | ·
Drives all door lock motors in response to signals. ·
Sends signals from the door control receiver to the slide door ECU.*4 ·
Checks whether all door lock/unlock operations are complete, sends hazard warning light operation signals to the combination meter assembly, outputs sounding request signals to the wireless door lock buzzer*4 and performs answer back operations. ·
Outputs sounding request signals to the wireless door lock buzzer when warning conditions are met. |
|
| Certification ECU (Smart Key ECU Assembly)*2 | Sends signals from the door control receiver to the main body ECU. | |
| Slide Door Motor Unit (for Driver Side)*3, *5
·
Slide Door ECU |
Controls the power slide door system in accordance with the signal received from the switches, sensors and ECUs. | |
| Slide Door Motor Unit (for Front Passenger Side)*3
·
Slide Door ECU |
Controls the power slide door system in accordance with the signal received from the switches, sensors and ECUs. | |
| Radio and Display Receiver Assembly*6 | ·
Displays the settings screen. ·
Sends customization information to the main body ECU. |
|
| Combination Meter Assembly | Flashes the hazard warning lights when an answer back operation is performed. | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
| DLC3 | ·
The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions. ·
The Global TechStream (GTS) can be connected to change settings as desired by the user. |
|
FUNCTION
The wireless door lock control system has the following functions:
| Function | Outline |
|---|---|
|
*1: Except wagon models *2: Wagon models *3: Models with power slide door wireless one-motion open function *4: Models with wireless door lock buzzer function *5: Models with multimedia system or navigation system |
|
| All Doors Lock | Pressing the lock button of the door control transmitter assembly*1 or electrical key*2 locks all the doors. |
| All Doors Unlock | Pressing the unlock button of the door control transmitter assembly*1 or electrical key*2 unlocks all the doors. |
| Slide Door Open*3 | Pressing the power slide door button of the door control transmitter assembly*1 or electrical key*2 for longer than approximately 0.8 seconds opens the slide door. |
| Slide Door Close*3 | Pressing the power slide door button of the door control transmitter assembly*1 or electrical key*2 for longer than approximately 0.8 seconds closes the slide door. |
| Power Slide Door Reserve Lock*3 | When a door other than the slide door is closed and the door lock is operated by the lock button of the door control transmitter assembly*1 or electrical key*2 during closing operation of the slide door, a door lock operation is performed at that time. The door lock operation completes when the closing operation of the slide door ends. |
| Power Slide Door Wireless One-motion Open*3 | Pressing the power slide door button of the door control transmitter assembly*1 or electrical key*2 when the slide door is locked, all doors are unlocked and the power slide door is opened. |
| Answer Back | When the doors are being locked or unlocked using the door control transmitter assembly*1 or electrical key*2, the wireless door lock buzzer sounds*4 and the hazard warning lights blink once while locking and twice while unlocking. |
| Door Ajar Warning | If any door is open or ajar, pressing the lock button of the door control transmitter assembly*1 or electrical key*2 will cause the wireless door lock buzzer to sound for approximately 5 seconds. |
| Automatic Relock | If none of the doors are opened for 30 seconds after being unlocked by the wireless door lock control, all the doors are locked again automatically. |
| Repeat | If a door is not locked in response to the locking operation of the door control transmitter assembly*1 or electrical key*2, the main body ECU will output a lock signal again after 1 second elapses. |
| Security | Sends a door lock/unlock operation request signal as a rolling code. |
| Customization | The on or off setting of some functions and settings can be performed using the Global TechStream (GTS) or radio and display receiver assembly*5. In addition, some functions are not available depending on specification. For details, refer to the Repair Manual. |
DIAGNOSIS
If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.