Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › from 2019.06
NM35X0E _58 Vehicle Interior _078578 HEATING / AIR CONDITIONING _0381952 AIR CONDITIONING SYSTEM GE GENERAL F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

An automatic air conditioning system, a manual air conditioning system, a manual cooler system, a manual heater system or a boost vent system is used depending on the model.


b.

The automatic air conditioning system uses neural network control to enhance comfort.


c.

An inside-and-outside dual air layer type air conditioning unit is used. The upper layer ensures anti fogging performance by introducing outside air, and the lower layer aims for ventilation loss reduction by circulating the inside air, achieving energy conservation.*


d.

A automatic rear automatic air conditioning system is used depending on the model.


e.

A automatic rear cooler system or a manual rear cooler system is used depending on the model.


f.

A manual rear heater system is used depending on the models.

*: Models with inside-and-outside dual air layer type air conditioning unit




SPECIFICATIONS


a.

Front Air Conditioning System, Front Heater System, Front Cooler System or Boost Vent System

Automatic Air Conditioning System
Component Specifications

*1: Models without inside-and-outside dual air layer type air conditioning unit

*2: Models with inside-and-outside dual air layer type air conditioning unit

*3: Upper side

*4: Lower side

*5: Models with 7GR-FKS engine

*6: Models with 1GD-FTV-engine

*7: Models without rear cooler system or automatic rear air conditioning system

*8: Models with rear cooler system or automatic rear air conditioning system

*9: Models without stop and start system

*10: Models with stop and start system

Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum-II (SFA-II)
Size (W x H x L) 222.3 mm x 120 mm x 27 mm
(8.75 in. x 4.72in. x 1.06in.)
Fin Pitch 1.8 mm (0.0709 in.)
Blower Motor with Fan Sub-assembly*1 Motor Type DC Ferrite Brushless
Fan Type Semi-sirocco
Fan Size (Dia. x H) 137 mm x 70 mm (5.39 in. x 2.76 in.)
Blower Motor with Fan Sub-assembly*2 Motor Type DC Ferrite Brushless
Fan Type Semi-sirocco
Fan Size (Dia. x H) 122 mm x 55 mm (4.80 in. x 2.17 in.)*3
125 mm x 38 mm (4.92 in. x 1.50 in.)*4
Cooler Condenser Assembly Type Global Inner-fin Condenser (GIC)
Size (W x H x L) 690 mm x 504.2 mm x 11.5 mm*5
(27.2 in. x 19.9 in. x 0.453 in.)*5
690 mm x 382.6 mm x 11.5 mm*6
(27.2 in. x 15.1 in. x 0.453 in.)*6
Fin Pitch 3.0 mm (0.118 in.)
Cooler Compressor Assembly Type 10SRE15C*7
10SRE18C*8
Refrigerant Type HFC-134a (R-134a)
No. 1 Cooler Evaporator Sub-assembly Type Beneficial Refrigerant Stream (BRS)*9
Cold Storage (CS)*10
Size (W x H x L) 239.5 mm x 231 mm x 38 mm
(9.43 in. x 9.09 in. x 1.50 in.)
Fin Pitch 3.0 mm (0.118 in.)

Manual Air Conditioning System, Manual Cooler System
Component Specifications
Manual Air Conditioning System Manual Cooler System

*1: Models with GIC type condenser

*2: Models with MF-IV type condenser

*3: Models with 7GR-FKS engine

*4: Models with 1GD-FTV-engine

*5: Models without manual rear cooler system

*6: Models with manual rear cooler system

*7: Models without stop and start system

*8: Models with stop and start system

Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum-II (SFA-II) -
Size (W x H x L) 222.3 mm x 120 mm x 27 mm
(8.75 in. x 4.72 in. x 1.06 in.)
-
Fin Pitch 1.8 mm (0.0709 in.) -
Blower Motor with Fan Sub-assembly Motor Type K70
Fan Type Semi-sirocco
Fan Size (Dia. x H) 137 mm x 70 mm (5.39 in. x 2.76 in.)
Cooler Condenser Assembly Type Global Inner-fin Condenser (GIC)*1
Multi-Flow IV (MF-IV)*2
Size (W x H x L)*1 690 mm x 504.2 mm x 11.5 mm (27.2 in. x 19.9 in. x 0.453 in.)*3
690 mm x 382.6 mm x 11.5 mm (27.2 in. x 15.1 in. x 0.453 in.)*4
Size (W x H x L)*2 696 mm x 504.6 mm x 22 mm (27.4 in. x 19.9 in. x 0.866 in.)*3
696 mm x 389.4 mm x 22 mm (27.4 in. x 15.3 in. x 0.866 in.)*4
Fin Pitch 3.0 mm (0.118 in.)*1
3.1 mm (0.122 in.)*2
Cooler Compressor Assembly Type 10SRE15C*5
10SRE18C*6
Refrigerant Type HFC-134a (R-134a)
No. 1 Cooler Evaporator Sub-assembly Type Beneficial Refrigerant Stream (BRS)*7
Cold Storage (CS)*8
Size (W x H x L) 239.5 mm x 231 mm x 38 mm (9.43 in. x 9.09 in. x 1.50 in.)
Fin Pitch 3.0 mm (0.118 in.)

Manual Heater System, Boost Vent System
Component Specifications
Manual Heater System Boost Vent System

*: The No. 1 cooler evaporator sub-assembly has been provided, but is not used.

Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum-II (SFA-II) -
Size (W x H x L) 222.3 mm x 120 mm x 27 mm
(8.75x 4.72in. x 1.06in.)
-
Fin Pitch 1.8 mm (0.0709 in.) -
Blower Motor with Fan Sub-assembly Motor Type K70
Fan Type Semi-sirocco
Fan Size (Dia. x H) 137 mm x 70 mm (5.39 in. x 2.76 in.)
No. 1 Cooler Evaporator Sub-assembly* Type Beneficial Refrigerant Stream (BRS)
Size (W x H x L) 239.5 mm x 231 mm x 38 mm (9.43 in. x 9.09 in. x 1.50 in.)
Fin Pitch 3.0 mm (0.118 in.)


b.

Rear Air Conditioning System (Models with Automatic Rear Air Conditioning System)

Component Specifications
Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum-II (SFA-II)
Size (W x H x L) 191.1 mm x 130 mm x 21 mm
(7.52 in. x 5.12 in. x 0.827 in.)
Fin Pitch 1.8 mm (0.0709 in.)
Blower Motor with Fan Sub-assembly Motor Type K62
Fan Type Semi-sirocco
Fan Size (Dia. x H) 140 mm x 65 mm (5.51 in. x 2.56 in.)
No. 1 Cooler Evaporator Sub-assembly Type Refrigerant Stream (RS)
Size (W x H x L) 255 mm x 145.7 mm x 50 mm
(10.0 in. x 5.74 in. x 1.97 in.)
Fin Pitch 3.4 mm (0.134 in.)


c.

Rear Cooler System (Models with Automatic Rear Cooler system or Manual Rear Cooler System)

Component Specifications
Evaporator Sub-assembly (Rear) Type Beneficial Refrigerant Stream (BRS)
Size (W x H x L) 293.1 mm x 151 mm x 38 mm
(11.54 in. x 5.94 in. x 1.50 in.)
Fin Pitch 3.0 mm (0.118 in.)
Rear Blower Motor with Fan Sub-assembly Motor Type K62
Fan Type Semi-sirocco
Fan Size (Dia. x H) 145 mm x 55 mm (5.71 in. x 2.17 in.)


d.

Rear Heater System (Models with Manual Rear Heater System)

Component Specifications
Rear Heater Unit Sub-assembly Type Straight Flow Aluminum-II (SFA-II)
Size (W x H x L) 149.5 mm x 150 mm x 27 mm
(5.89 in. x 5.91 in. x 1.06 in.)
Fin Pitch 1.8 mm (0.0709 in.)
Rear Blower Motor Sub-assembly Motor Type S70F
Fan Type Semi-sirocco
Fan Size (Dia. x H) 120 mm x 70 mm (4.72 in. x 2.76 in.)



MAIN FEATURES


a.

The air conditioning system has the following features:

Feature Outline
High Performance
·

Neural network control is used, so passengers can finely control the air conditioning for maximum comfort.*1

·

The rear outlets are installed on the back of the seat leg cover to ensure comfortable air conditioning performance for the rear passengers.*2

·

The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control.*1

·

The rear cooling unit assembly is available on depending on the model.

·

A clean air filter (air refiner element) is used.


Light Weight*1
·

A bus connector with a built-in IC is used in a lightweight wire harness design to allow a reduced number of wires.

·

The use of this connector means that pulse pattern type servo motors can be used.


Compact*1 A blower motor with a built-in blower motor controller is used to achieve a compact construction for the front air conditioning system.
Others The following parts are used to ensure high cooling performance while achieving a compact and lightweight construction:
·

Semi-center Location Air Conditioning Unit

·

10SRE15C Type Compressor*3

·

10SRE18C Type Compressor*4

·

Refrigerant Stream (RS) Evaporator*5

·

Beneficial Refrigerant Stream (BRS) Evaporator*4,*6

·

Cold Storage (CS) Evaporator*7

·

Straight Flow Aluminum (SFA)-II Heater Radiator Sub-assembly*8,*9

·

Global Inner-fin Condenser (GIC)*10

·

Multi-Flow IV (MF-IV) Sub-cool Condenser*11

·

A [nanoeTM]*12 generator is provided to achieve excellent air quality and comfort in the cabin.*13



HINT:

*1: Models with automatic air conditioning system

*2: Models with rear passenger side air duct

*3: Models without rear cooler system and automatic rear air conditioning system

*4: Models with rear cooler system and automatic rear air conditioning system

*5: Models with automatic rear air conditioning system

*6: Models without stop and start system

*7: Models with stop and start system

*8: Models with automatic air conditioning system, manual air conditioning system or manual heater system

*9: Models with manual rear heater system

*10: Models with GIC type condenser

*11: Models with MF-IV type condenser

*12:

Y115208

[nanoeTM] is a trademark owned by Panasonic Co., Ltd.

*13: Models with ion generator




PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)