CONSTRUCTION
Front Seat Frame
The front/rear slide pitch is optimized, making more detailed adjustment of the front/rear seat position possible.
A seat lifter mechanism is provided for the driver seat, making it possible to support a wider variety of physiques.
When the back of the passenger sinks into the seat during a rear collision, the head and back are simultaneously supported to reduce impact to the neck area.
| *a | Optimized Front/Rear Slide Pitch | *b | Provided Seat Lifter Mechanism (Driver Seat Only) |
| *c | Ensured Whiplash Reduction Performance | - | - |
Front Seat Cushion
The counterforces at the front and rear of the hip are optimized.
| *1 | Front Seat Cushion | - | - |
| *a | Side View | *b | Counterforces |
The width of the bottom seat surface is increased to improve the bottom support feeling.
| *1 | Front Seat Cushion | - | - |
| *a | Front View | *b | Width of Bottom Seat Surface |
The angles of the front seat cushion sides are optimized to ensure holding performance, and the heights of the sides are lowered in consideration of accessibility.
| *1 | Front Seat Cushion | - | - |
| *a | Front View | *b | Optimized Angle and Height of Front Seat Cushion Sides |
Front Seatback
The pressure balance between the lumbar and upper back areas is optimized.
| *1 | Front Seatback | - | - |
| *a | Optimized Thickness of Upper Back Pad and Lumbar Pad | - | - |
Front Seatback Console (Models with Fix Type Bench Seat and Sliding Type Bench Seat)
A large console is provided for the seatback of the center seat in consideration of usability.
| *1 | Front Seatback Board Sub-assembly LH | *2 | Cup Holder |
| *3 | Storage Space | *4 | |
| *a | The illustration is shown an example only. | - | - |
Front Seat Cushion Flip Up Mechanism
A flip up mechanism is provided for the front seat cushion of the fix type bench seat, providing a large storage space.
Front Center Seat Headrest
Headrest of the front center seat is provided for the sliding bench seat.
Manual Adjuster Function
The front seat manual adjuster is provided as shown in the illustration:
| *A | Driver Seat | *B | Front Passenger Seat (Separate Type Front Seat) |
| *C | Front Passenger Seat (Bench Slide Type Front Seat) | - | - |
| *1 | Lifter Lever | *2 | Reclining Lever |
| *3 | Slide Lever | - | - |
| *a | 59 mm | *b | 250 mm |
| *c | 82° | *d | 26° |
| *e | 90 mm | *f | The illustration is shown an example only. |
Seatback Pocket, USB Charger Socket
A seatback pocket is provided on the back of the front seats.
A USB charger socket is provided on the back of the center seat of the sliding bench seat depending on the model.
| *A | Models with Separate Type Front Seat (Driver Seat: 8-way Power Seat, Front Passenger Seat: 4-way Manual Seat) | *B | Models with Separate Type Front (Driver Seat: 6-way Manual Seat, Front Passenger Seat: 4-way Manual Seat) |
| *C | Models with Bench Type Front Seat (Driver Seat: 8-way Power Seat, Front Passenger Seat: 4-way Manual Seat) | *D | Models with Bench Type Front Seat (Driver Seat: 6-way Manual Seat, Front Passenger Seat: 4-way Manual Seat) |
| *1 | Seatback Pocket | *2 | USB Charger Socket |