CONSTRUCTION
Rear Seat Cushion
The rear seat cushion pad is optimized, achieving a seat with an excellent cushioning feeling and cushioning stroke.
| *1 | Rear Seat Cushion | - | - |
| *a | Thickness of Rear Seat Cushion Pad | *b | The illustration shown is examples only. |
Assist Grip, Cup Holder, Seatback Pocket, Convenience Hook, Armrest
Assist grips, cup holders, seatback pockets and convenience hooks are provided on the seatback of the single-passenger, 2-passenger and 3-passenger rear seat with reclining function in consideration of passenger usability and comfort.
An armrest is provided on the 2-passenger rear seat with reclining function in consideration of passenger comfort.
| *A | DX Grade | *B | GL Grade without Rear Seat Armrest |
| *C | GL Grade with Rear Seat Armrest | - | - |
| *1 | Assist Grip | *2 | Convenience Hook |
| *3 | Cup Holder | *4 | Seatback Pocket |
| *5 | Rear Seat Armrest | - | - |
| *a | The illustration is shown an example only. | - | - |
Assist grips are provided on the seatback of the 4-passenger rear seat.
Rear Seat Headrest
Headrests are provided for the single-passenger, 2-passenger and 3-passenger rear seats depending on the model.
Flip Up Seat
Two flip up 2-passenger seats are provided in the last row depending on the model.
Dampers are provided for the space-increasing 2-passenger seat to decrease the speed at which the seat returns from the flipped up condition and the amount of locking noise, improving the quality feel.
A convenience hook is provided on the under cover in consideration of usability after the seat is flipped up.
A hanger hook is provided on the back of the seat depending on the model.
| *1 | 2-passenger Flip Up Seat | *2 | Hanger Hook |
| *3 | Convenience Hook | - | - |
| *a | Flip-up State | *b | The illustration is shown an example only. |
| *1 | Reclining Lever | *2 | Lock Release Lever |
| *3 | Securing Band | - | - |
| *a | Remove the headrest | *b | While pressing the reclining lever, fold down the seatback |
| *c | Pull up the lock release lever and flip up the seat | *d | Fold in the seat leg and pull out the securing band |
| *e | Hook the securing band on the hook on the D pillar side | *f | Pull the end of the band tight and securely attach the fastening tape |
| *g | The illustration is shown an example only. | - | - |
ISOFIX Bar
Top tether anchor bars are provided in the rear seats depend on the model. Also, covers (child restraint seat tether anchor cover) are used for the top tether anchor bars in consideration of appearance.
| *A | Models for Australia and New Zealand | *B | Except Models Australia and New Zealand |
| *1 | ISOFIX Bar | *2 | Top Tether Anchor Bar |
| *3 | Rear Seatback Cover (Child Restraint Seat Tether Anchor Cover) | - | - |
| *A | Models with Power Captain Seat | *B | Models with Manual Captain Seat |
| *1 | ISOFIX Bar | *2 | Top Tether Anchor Bar |
Side Table
On models with manual captain seat or power captain seat, when using the rear seat side table assembly, raise the lower portion of the table to a horizontal position from a retracted state.
A cup holder and convenience hook (load capacity: 2 kg) are provided for the side table of the manual captain seat or power captain seat.
| *A | Models with Manual Captain Seat | *B | Models with Power Captain Seat |
| *1 | Cup Holder | *2 | Shopping Bag Fook |
| *3 | Side Table | *4 | Lever for Retractable |
| *a | When Use | *b | Stored State |
| *c | A - A Cross Section | - | - |
Ottoman
An electric adjustment type ottoman is used for the power captain seat. Furthermore, the reclining angle of the ottoman is 77°
| *1 | Ottoman Motor | *2 | Ottoman Link |
| *3 | Connecting Rod | - | - |
| *a | Storing State | *b | Deployment State |
Cup Holder
On models with power captain seat, a cup holder is provided in the armrest.
| *1 | Lid | *2 | Cup Holder |
Slide and Reclining Mechanism, Tip-up Mechanism
Rear No. 1 Seat and Rear No. 2 Seat
Slide operations are performed with the slide levers on the side and rear of the seat cushion.
Reclining operations are performed with the seat side reclining lever.
A manual walk-in function is provided that allows passengers to smoothly enter and exit the rear No. 2 seat and rear No. 3 seat.
When the manual walk-in lever located on the back or rear of the seat cushion is operated, the seatback folds and slides forward, allowing passengers to quickly enter and exit the rear No. 2 seat and rear No. 3 seat. After the seat slides forward, the reclining position returns to the position it was at before the manual walk-in operation was performed.
| *A | Only Rear No. 2 Seat | - | - |
| *1 | Reclining Lever | *2 | Slide Lever (Front) |
| *3 | Manual Walk-in Lever | *4 | Slide Lever (Rear) |
| *a | 68° | *b | Rear No. 1 Seat: 592 mm, Rear No. 2 Seat (Models with 3-low Rear Seat): 608 mm (Models with Rear No. 1 Power Seat), 624 mm (Models with Rear No. 1 Manual Seat), Rear No. 2 Seat (Models with 2-low Rear Seat): 1024mm |
| *c | The illustration is shown an example only. | - | - |
| *A | Models with Rear Seat Heater System | *B | Models without Rear Seat Heater System |
| *C | Only Rear No. 1 Seats | *D | Only Rear No. 2 Seats |
| *1 | Rear Power Seat Switch | *2 | Reclining Switch |
| *3 | Ottoman Switch | *4 | Slide Lever (Front) |
| *5 | Manual Walk-in Lever | *6 | Slide Lever (Rear) |
| *a | 58.7° | *b | Rear No. 1 Seat: 608 mm, Rear No. 2 Seat: 976 mm |
| *c | 77° | *d | The illustration is shown an example only. |
Rear No. 3 Seat
The slide lever on the rear of the seat cushion can be operated from the luggage compartment to slide the rear No. 3 seat or rear No. 2 seat* forward and backward.
The cushion flip-up lever located on the front or rear of the seat cushion can be operated to flip up the seat cushion, further increasing the size of the luggage compartment.
*: Models with rear No. 2 power seat
| *1 | Reclining Lever | *2 | Slide Lever (Front) |
| *3 | Cushion Flip-up Lever (Front) | *4 | Slide Lever (Rear) |
| *5 | Cushion Flip-up Lever (Rear) | - | - |
| *a | The illustration is shown an example only. | - | - |