FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*: VX grade |
||
| Headlight Assembly LH | Headlight ECU Sub-assembly LH* | ·
Receives various signals and controls the headlight leveling motor. ·
Sends headlight leveling motor operation signals to the headlight ECU sub-assembly RH. |
| Headlight Assembly RH | Headlight ECU Sub-assembly RH* | Controls the headlight leveling motor according to control signals from the headlight ECU sub-assembly LH. |
| Rear Height Control Sensor Sub-assembly LH* | Detects the vehicle height value and transmits a signal to the headlight ECU sub-assembly LH. | |
| Turn Signal Switch | Light Control Switch | Sends the light control switch position signal to the steering sensor. |
| Steering Sensor | Sends the light control switch position signal to the main body ECU. | |
| Main Body ECU (Multiplex Network Body ECU) | Receives a light control signal and transmits it to the headlight ECU sub-assembly LH. | |
| Skid Control ECU | Sends the vehicle speed signal to the main body ECU. | |
| Combination Meter Assembly | Sends the vehicle speed signal to the headlight ECU sub-assembly LH. | |
| Central Gateway ECU (Network Gateway ECU) | Relays the signal between the CAN communication lines. | |
SYSTEM CONTROL
The headlight ECU sub-assembly LH receives vehicle height change signals sent from the rear height control sensor sub-assembly and calculates the changes in the pitch angle of the vehicle. The headlight ECU sub-assembly LH/RH drives the headlight leveling motor LH/RH in accordance with the change.
| Control Mode | Details |
|---|---|
| While Stopped | If the vehicle attitude is stable for approximately 3 seconds with the headlights on while stopped, the headlight ECU sub-assembly LH/RH operates the headlight leveling motor LH/RH in accordance with the detected change in vehicle attitude. |
FUNCTION
The rear height control sensor sub-assembly detects changes in the vehicle's rear ride height due to cargo loads etc., and operates the headlight leveling motor RH/LH in accordance with the changes, keeping the headlight axes at a constant angle.
Combination Meter Assembly
When a malfunction occurs in the automatic headlight beam level control system, the buzzer sounds, and the "Headlight System Malfunction Visit Your Dealer" warning message is displayed on the multi-information display.
FAIL-SAFE
If the headlight ECU sub-assembly detects a malfunction in the automatic headlight beam level control system, the headlight ECU sub-assembly performs the fail-safe operation.