FUNCTION OF MAIN COMPONENTS
The main components have the following functions:
| Component | Function |
|---|---|
| Seat Heater Assembly | The seat heater is sewn into the internal surfaces of the seat cushion and the seat back. It warms up the seat surfaces using the heat caused by electrical resistance. |
| Seat Heater Switch | By operating this switch, the rear seat heater system is turned on. |
| Rear Seat Climate Control ECU (Rear No. 1 LH/RH) | Operates the rear seat heater system in accordance with the signals from the seat heater switch. |
| Rear Seat Climate Control ECU (Rear No. 2 LH/RH) |
FUNCTION
The rear seat heater system is operated by pressing the seat heater switch.
The engine switch is tuned On (IG).
An indicator light is provided on the top part of the seat heater switch, allowing the user to confirm the operation condition of the rear seat heater.
SYSTEM CONTROL
A thermistor detects the temperature of the seat surface and the rear climate control ECU (Rear No. 1 LH/RH, Rear No. 2 LH/RH) controls it.
The seat heater system is operated by pressing the seat heater switch. The temperature can be adjusted between 2 stages by pressing the seat heater switch.