OUTLINE
The power window control system controls power window operation using the power window regulator motors.
The main controls for this system are the multiplex network master switch assembly and passenger side door power window regulator switch. Operating a window switch results in electrical power being transmitted to the corresponding power window regulator motor.
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch
(Position) |
Engine Switch
(Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |
Door Control Receiver Expressions
The type of door control receiver used on this model differs according to the specifications of the vehicles. The expressions listed in the table below are used in this section:
| Vehicle Specification | Actual Part Name | Part Name in Manual | |
|---|---|---|---|
| Models with Integrated Type Tire Pressure Warning ECU and Receiver | Models without Entry and Start System | Door Control and Tire Pressure Monitoring System Receiver Assembly | Door Control Receiver |
| Models with Entry and Start System | Electrical Key and TPMS Receiver Assembly | ||
| Models with Separated Type Tire Pressure Warning ECU and Receiver | Door Control Receiver | ||