Home › Vehicle Exterior › MIRROR (EXT) › MIRROR SYSTEM › from 2019.06
NM35X0E _59 Vehicle Exterior _078699 MIRROR (EXT) _0381800 MIRROR SYSTEM CO CONTROL F

MIRROR (EXT)  MIRROR SYSTEM  CONTROL  MIRROR CONTROL  


FUNCTION OF MAIN COMPONENT


Component Function

*1: Models with manual retractable function

*2: Models with automatic retractable function

Outer Rear View Mirror Assembly LH/RH
·

Vertical Adjustment Motor

·

Horizontal Adjustment Motor

·

Retraction/Restoration Motor


·

Moves the mirror surface of the outer rear view mirror assembly LH or RH based on the mirror surface operation signal output by the left/right adjustment switch.

·

Retraction or restoration the outer rear view mirror assemblies LH and RH based on the operation signal output by the outer mirror switch assembly.


Outer Mirror Switch Assembly Left/Right Adjustment Switch
·

Consists of R and L switches. One must be chosen to operate the left/right adjustment switch.

·

Selects the outer rear view mirror assembly whose mirror surface angle is to be adjusted.

·

After selecting the R or L switch, the right, left, up and down control switches can be operated to move the angle of the mirror surface.

·

Outputs a mirror surface operation signal to the outer rear view mirror assembly LH or RH.


Retractable Outer Mirror Switch*1
·

Retracts and returns the outer rear view mirror assemblies.

·

Outputs the selected retract/return signal to the outer rear view mirror assemblies LH and RH.


Auto Retract/Return Switch*2 Built into the outer mirror switch assembly and sends the auto retract/return switch signal to the main body ECU(multiplex network body ECU).
Main Body ECU (Multiplex Network Body ECU)*2
·

Outputs the switch signal received from the outer mirror switch assembly to the mirror control relays.

·

Received the door lock/unlock signal from the front and rear door lock with motor assemblies.


·

Mirror Control Relay (Mirror No. 1 Relay)*2

·

Mirror Control Relay (Mirror No. 2 Relay)*2


Outputs the mirror auto retract/return switch signal from the main body ECU (multiplex network body ECU) to the retraction/restoration motors.
Central Gateway ECU (Network Gateway ECU)*2 Relays the signal between the CAN communication lines.
DLC3*2
·

The Global TechStream (GTS) can be connected to read the Diagnostic Trouble Codes (DTCs) of malfunctions.

·

The Global TechStream (GTS) can be connected to change settings as desired by the user.




FUNCTION


a.

Outer Rear View Mirror Control

i.

The outer rear view mirror assemblies have the following functions:

Function Outline

*1: Models with manual retractable function

*2: Models with automatic retractable function

*3: Models with entry and start system

Electric Remote Control System Electrical Remote Control Mirror Function The adjustment axis of the mirror surface of the electric remote mirrors can be controlled by using the left/right adjustment switch.
Manual Retractable Function*1 This function retracts and returns the outer rear view mirrors when the retractable outer mirror switch is operated.
Automatic Retractable Function*2 This function automatically synchronizes retracting and returning the outer rear view mirror assembly LH/RH with locking and unlocking the doors using the entry function*3, wireless function.




DIAGNOSIS


a.

In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The Diagnostic Trouble Codes (DTCs) of malfunctions can be read by connecting the Global TechStream (GTS). For details, refer to the Repair Manual.