OUTLINE
The 1GD-FTV TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is an in-line 4-cylinder, 2.8-liter, 16-valve DOHC, turbocharged diesel engine. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibrations.
An intercooler is provided. This lowers the intake air temperature and improves power output.
SPECIFICATION
| Engine Type | 1GD-FTV | ||
|---|---|---|---|
| w/ Variable Nozzle Vane Type Turbocharger | |||
| w/ Solenoid Type Injector | |||
|
*1: Models with emissions standards for light duty vehicles *2: Models with emissions standards for heavy duty vehicles (destination package for Russia) *3: Models with emissions standards for heavy duty vehicles (except destination package for Russia) *4: Models with manual transmission (M/T) *5: Models with automatic transmission (A/T) and Exhaust Gas Recirculation (EGR) system (with EGR cooler) *6: Models with A/T and EGR system (without EGR cooler) or models with A/T without EGR system *7: Models with EGR system (with EGR pre-cooler) *8: Models with EGR system (without EGR pre-cooler) or models without EGR system *9: Varies depending on the vehicle specification. *10: The figure shown is the weight of the part without coolant and oil. *11: The figure shown is a representative example. *12: Models with A/T and UREA SCR system (without EGR pre-cooler) *13: Models with M/T and UREA SCR system (without EGR pre-cooler) *14: Models without UREA SCR system *15: Models with UREA SCR system |
|||
| No. of Cyls. and Arrangement | 4-cylinder, In-line | ||
| Valve Mechanism | 16-valve DOHC, Chain Drive | ||
| Combustion Chamber | Direct Injection Type | ||
| Manifolds | Cross-flow | ||
| Fuel System | Common-rail Type | ||
| Displacement | cm3 (cu. in.) | 2755 (168.1) | |
| Bore x Stroke | mm (in.) | 92.0 x 103.6 (3.62 x 4.08) | |
| Compression Ratio | 15.6 : 1 | ||
| Max. Output (EEC)*1 | kW@rpm | 130@3400*4*5
115@3600*6 |
|
| Max. Output (EEC)*2 | kW@rpm | 110@3600 | |
| Max. Output (EEC)*3 | kW@rpm | 120@3600*7
115@3600*8 |
|
| Max. Torque (EEC)*1 | N*m@rpm | 420@1400 to 2600*4
450@1600 to 2400*5 420@1600 to 2200*6 |
|
| Max. Torque (EEC)*2 | N*m@rpm | 420@1600 to 2000 | |
| Max. Torque (EEC)*3 | N*m@rpm | 420@1600 to 2200*14
420@1400 to 2600*15 |
|
| Valve Timing | Intake | Open | 6°BTDC |
| Closed | 29°ABDC | ||
| Exhaust | Open | 40°BBDC | |
| Closed | 10°ATDC | ||
| Firing Order | 1 - 3 - 4 - 2 | ||
| Fuel Cetane Number | 48 or higher | ||
| Emission Regulation*9 | - | ||
| EURO 1 | |||
| EURO 2 | |||
| EURO 3 | |||
| EURO 4 | |||
| EURO 5 | |||
| EURO 6 | |||
| Engine Service Mass (Reference)*10*11 | kg (lb) | 285 (628.3)*12
313 (690.0)*13 |
|
MAIN FEATURES
This engine is able to achieve the following through the use of the items listed below:
(1) High performance and fuel economy
(2) Low noise and vibration
(3) Lightweight and compact design
(4) Good serviceability
(5) Clean emissions
| Item | (1) | (2) | (3) | (4) | (5) |
|---|---|---|---|---|---|
|
*1: Models without EGR pre-cooler *2: Models with EGR pre-cooler *3: Models with EGR system *4: Models with EGR system (with No. 2 EGR valve assembly) *5: Models with catalyst support control *6: Models with UREA SCR system |
|||||
| A cylinder head cover sub-assembly made of plastic is used. | - | ○ | ○ | - | - |
| An oil mist separator is used on the cylinder head cover sub-assembly. | - | - | - | - | ○ |
| A cylinder head sub-assembly made of aluminum alloy is used. | - | - | ○ | - | - |
| A tangential port and a helical port are used on the intake port. | ○ | - | - | - | ○ |
| A piston provided with a combustion chamber is used. | ○ | ○ | - | - | ○ |
| Connecting rod sub-assemblies made of high tension material. | ○ | ○ | ○ | - | - |
| A timing chain and a chain tensioner are used. | - | ○ | - | ○ | - |
| Valve lash adjuster assemblies are used. | - | ○ | - | ○ | - |
| Valve rocker arm sub-assemblies are used. | ○ | ○ | ○ | ○ | - |
| Toyota Genuine Super Long Life Coolant (SLLC) is used. | - | - | - | ○ | - |
| A serpentine belt drive system is used. | - | - | ○ | ○ | - |
| A diesel throttle valve is used. | ○ | ○ | - | - | ○ |
| A variable nozzle vane type turbocharger sub-assembly is used.*1 | ○ | - | - | - | ○ |
| A variable nozzle vane type turbocharger sub-assembly is used. (Water-cooling structure)*2 | ○ | - | - | ○ | ○ |
| An intercooler assembly is used. | ○ | - | - | - | ○ |
| A supply pump assembly is used. | ○ | ○ | ○ | - | ○ |
| A common-rail type fuel injection system is used. | ○ | ○ | - | - | ○ |
| An injector assembly is provided in the bore center. | ○ | ○ | - | - | ○ |
| Compensation values and Quick Response (QR) codes are used. | ○ | - | - | ○ | ○ |
| A mass air flow meter sub-assembly is used. | ○ | - | - | - | ○ |
| A pilot injection control system is used. | - | ○ | - | - | ○ |
| An EGR system is used.*3 | - | - | - | - | ○ |
| An EGR cooler with bypass is used.*4 | - | - | - | - | ○ |
| An oxidation catalyst is used.*4 | - | - | - | - | ○ |
| A DPF is used.*5 | - | - | - | - | ○ |
| An UREA SCR system is used.*6 | - | - | - | - | ○ |
| An SCR catalyst is used.*6 | - | - | - | - | ○ |