Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › from 2019.06
NM35X0E _59 Vehicle Exterior _078981 EXTERIOR PANELS / TRIM _0391538 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  SOUND ABSORBING AND VIBRATION DAMPING MATERIAL  


CONSTRUCTION


a.

Sound Absorption and Insulation Structure

i.

Various types of silencers are positioned around the floor panel and engine compartment to greatly suppress vibration and noise that are transmitted into the interior from parts such as the engine and tires, achieving superior quietness. Also, materials such as foamed materials, sound insulation sealant and damping materials are optimally positioned to achieve superior NVH* performance.

HINT:

*: An abbreviation created by taking the first letter of Noise (unpleasant sounds and loud sounds), Vibration (vibrations from the engine and tires) and Harshness (vibrations felt through the steering wheel, seats and floor according to height changes in the road surface, etc.). NVH is used to describe the level of riding comfort and sound quality actually experienced by passengers.




b.

Floor Silencer

i.

To reduce interior noise (road noise / engine noise), asphalt sheets are used. The position, material and thickness vary depending on the model, achieving optimal NVH performance and weight reduction for each model.

Front Floor Silencer (LHD Models)
V123572C01
1.667,0.75 1.667,0.417 true 1.667,3.5 1.667,3.167 true 2.5,0.917 2.5,0.417 true 1.333,1.167 1.333,0.417 true 5.833,2.25 5.833,1.75 true 0.719,3.5 1.031,3.656 0.313,0.156 10 false : *a 1.604,0.25 1.917,0.406 0.313,0.156 10 false *b 1.604,3.51 1.917,3.667 0.313,0.156 10 false *b 2.438,0.26 2.75,0.417 0.313,0.156 10 false *b 1.271,0.25 1.583,0.406 0.313,0.156 10 false *b 5.771,1.583 6.083,1.74 0.313,0.156 10 false *b
*a Asphalt Seat *b Except DX Grade


Front Floor Silencer (RHD Models)
V123573C01
1.667,0.75 1.667,0.417 true 1.667,3.5 1.667,3.167 true 2.5,0.917 2.5,0.417 true 1.333,1.083 1.333,0.417 true 5.833,2.25 5.833,1.75 true 0.719,3.5 1.031,3.656 0.313,0.156 10 false : *a 1.604,0.25 1.917,0.406 0.313,0.156 10 false *b 1.604,3.51 1.917,3.667 0.313,0.156 10 false *b 2.438,0.25 2.75,0.406 0.313,0.156 10 false *b 1.271,0.25 1.583,0.406 0.313,0.156 10 false *b 5.771,1.594 6.083,1.75 0.313,0.156 10 false *b
*a Asphalt Seat *b Except DX Grade


Rear Floor Silencer (Standard Roof Models: Commuter, DX Grade, 15-seater Models)
V123574C01
0.698,3.49 1.01,3.646 0.313,0.156 10 false : *a
*a Asphalt Seat - -


Rear Floor Silencer (Standard Roof Models: Commuter, DX Grade, Except 15-seater Models)
V123575C01
0.698,3.49 1.01,3.646 0.313,0.156 10 false : *a
*a Asphalt Seat - -


Rear Floor Silencer (Standard Roof Models: Commuter, GL Grade)
V123576C01
0.698,6.438 1.313,6.635 0.615,0.198 10 false : *a
*a Asphalt Seat - -


Rear Floor Silencer (High Roof Models: Commuter, DX Grade, 17-seater Models)
V123578C01
0.698,3.49 1.01,3.646 0.313,0.156 10 false : *a
*a Asphalt Seat - -


Rear Floor Silencer (High Roof Models: Commuter, DX Grade, Except 17-seater Models)
V123577C01
0.698,3.49 1.01,3.646 0.313,0.156 10 false : *a
*a Asphalt Seat - -


Rear Floor Silencer (High Roof Models: Commuter, GL Grade)
V123579C01
0.698,6.438 1.313,6.635 0.615,0.198 10 false : *a
*a Asphalt Seat - -


Rear Floor Silencer (VX Grade/ Rear Seat: (2+2+2), (2+2+3), (2+2 (Power)))
V124148C01
0.698,6.469 1.01,6.625 0.313,0.156 10 false : *a
*a Asphalt Seat - -


Rear Floor Silencer (VX Grade/ Rear Seat: (2+2+4), (2+2+1), (2+2 (Manual)))
V124149C01
0.698,6.469 1.188,6.646 0.49,0.177 10 false : *a
*a Asphalt Seat - -




c.

Sealing Material

i.

Foamed materials, NV covers and sponge sealant are optimally placed in the side member opening and front header to suppress wind noise and road noise which enter the cabin.

Standard Roof Models: Slide Door Side (The illustration shown is an example only.)
V123582C01
1,3.917 1.313,4.073 0.313,0.156 10 false *a 2.833,3.917 3.146,4.073 0.313,0.156 10 false *b 4.75,3.917 5.063,4.073 0.313,0.156 10 false *c 6.021,3.927 6.333,4.083 0.313,0.156 10 false *d 0.938,5.25 1.25,5.406 0.313,0.156 10 false *e 2.583,5.26 2.896,5.417 0.313,0.156 10 false *f 4.25,5.25 4.563,5.417 0.313,0.167 10 false *g 6,5.25 6.313,5.406 0.313,0.156 10 false *h 1,6.917 1.313,7.073 0.313,0.156 10 false *i 2.833,6.844 3.146,7.083 0.313,0.24 10 false *j 3.771,6.75 4.083,6.906 0.313,0.156 10 false *k 4.917,6.75 5.229,6.906 0.313,0.156 10 false *l 6.188,6.927 6.5,7.083 0.313,0.156 10 false *m 1.75,8.5 2.063,8.656 0.313,0.156 10 false *n 3.25,8.5 3.563,8.656 0.313,0.156 10 false *o 4.75,8.594 5.063,8.75 0.313,0.156 10 false *p 0.583,8.052 0.885,8.25 0.302,0.198 10 false : *s 5.938,0.323 6.083,0.479 0.146,0.156 10 false A 0.583,8.344 0.885,8.542 0.302,0.198 10 false : *t 6.542,0.365 6.688,0.521 0.146,0.156 10 false A 6.448,0.656 6.594,0.813 0.146,0.156 10 false B 6.01,0.635 6.156,0.792 0.146,0.156 10 false B 4.635,1.698 4.781,1.854 0.146,0.156 10 false C 5.031,1.938 5.177,2.094 0.146,0.156 10 false C 4.906,0.427 5.052,0.583 0.146,0.156 10 false D 4.604,0.938 4.75,1.094 0.146,0.156 10 false D 4.406,0.625 4.552,0.781 0.146,0.156 10 false E 4.531,0.406 4.677,0.563 0.146,0.156 10 false E 4.031,0.615 4.177,0.771 0.146,0.156 10 false F 4.083,0.198 4.229,0.354 0.146,0.156 10 false F 3.292,0.802 3.438,0.958 0.146,0.156 10 false G 3.771,0.792 3.917,0.948 0.146,0.156 10 false G 3.323,1.094 3.469,1.25 0.146,0.156 10 false H 3.792,1.104 3.938,1.26 0.146,0.156 10 false H 3.344,1.802 3.49,1.958 0.146,0.156 10 false I 3.979,1.813 4.125,1.969 0.146,0.156 10 false I 3.135,0.583 3.281,0.74 0.146,0.156 10 false J 3.135,0.146 3.281,0.302 0.146,0.156 10 false J 1.719,0.938 1.865,1.094 0.146,0.156 10 false K 2.115,1.281 2.26,1.438 0.146,0.156 10 false L 2.375,1.646 2.521,1.802 0.146,0.156 10 false M 2.24,2.01 2.385,2.167 0.146,0.156 10 false N 1.719,0.156 1.865,0.313 0.146,0.156 10 false O 0.271,1.896 0.417,2.052 0.146,0.156 10 false P 2.281,0.938 2.427,1.094 0.146,0.156 10 false K 1.865,2.01 2.01,2.167 0.146,0.156 10 false N 1.927,1.281 2.073,1.438 0.146,0.156 10 false L 1.781,1.635 1.927,1.792 0.146,0.156 10 false M 1.729,0.573 1.875,0.729 0.146,0.156 10 false O 0.531,1.896 0.677,2.052 0.146,0.156 10 false P 0.583,7.719 0.885,7.917 0.302,0.198 10 false : *r 5.802,1.823 5.948,1.979 0.146,0.156 10 false Q 6.438,1.813 6.583,1.969 0.146,0.156 10 false Q 6.135,8.5 6.438,8.698 0.302,0.198 10 false *q
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d D - D Cross Section
*e E - E Cross Section *f F - F Cross Section
*g G - G Cross Section *h H - H Cross Section
*i I - I Cross Section *j J - J Cross Section
*k K - K Cross Section *l L - L Cross Section
*m M - M Cross Section *n N - N Cross Section
*o O - O Cross Section *p P - P Cross Section
*q Q - Q Cross Section *r VX Grade, GL Grade, High Spec Van Only
*s VX Grade, GL Grade Only *t All Specification


Standard Roof Models: Slide Door Less Side (The illustration shown is an example only.)
V123583C01
1.083,3.833 1.396,3.99 0.313,0.156 10 false *a 3.021,3.844 3.333,4 0.313,0.156 10 false *b 4.771,3.844 5.083,4 0.313,0.156 10 false *c 6.021,3.833 6.333,3.99 0.313,0.156 10 false *d 0.771,5.167 1.083,5.323 0.313,0.156 10 false *e 2.271,5.167 2.583,5.323 0.313,0.156 10 false *f 3.917,5.083 4.167,5.333 0.25,0.25 10 false *g 5.938,5.167 6.25,5.323 0.313,0.156 10 false *h 1.25,6.917 1.563,7.073 0.313,0.156 10 false *i 3.417,6.75 3.729,6.99 0.313,0.24 10 false *j 4.667,6.26 4.979,6.417 0.313,0.156 10 false *k 6.188,6.76 6.5,6.917 0.313,0.156 10 false *l 2.083,8.51 2.396,8.667 0.313,0.156 10 false *m 0.583,8.052 0.885,8.25 0.302,0.198 10 false : *q 5.99,0.26 6.135,0.417 0.146,0.156 10 false A 0.583,8.344 1.083,8.583 0.5,0.24 10 false : *r 6.521,0.292 6.667,0.448 0.146,0.156 10 false A 6.458,0.667 6.604,0.823 0.146,0.156 10 false B 6.063,0.646 6.208,0.802 0.146,0.156 10 false B 4.667,1.688 4.813,1.844 0.146,0.156 10 false C 5.042,1.906 5.188,2.063 0.146,0.156 10 false C 4.927,0.469 5.073,0.625 0.146,0.156 10 false D 4.646,0.917 4.792,1.073 0.146,0.156 10 false D 4.417,0.625 4.563,0.781 0.146,0.156 10 false E 4.552,0.406 4.698,0.563 0.146,0.156 10 false E 4.073,0.208 4.219,0.365 0.146,0.156 10 false F 4.063,0.583 4.208,0.74 0.146,0.156 10 false F 3.781,0.854 3.927,1.01 0.146,0.156 10 false G 3.281,0.865 3.427,1.021 0.146,0.156 10 false G 3.302,1.177 3.448,1.333 0.146,0.156 10 false H 3.802,1.167 3.948,1.323 0.146,0.156 10 false H 3.99,1.823 4.135,1.979 0.146,0.156 10 false I 3.344,1.833 3.49,1.99 0.146,0.156 10 false I 3.135,0.167 3.281,0.323 0.146,0.156 10 false J 3.135,0.552 3.281,0.708 0.146,0.156 10 false J 2.292,0.938 2.438,1.094 0.146,0.156 10 false K 2.24,1.719 2.385,1.875 0.146,0.156 10 false L 0.271,1.885 0.417,2.042 0.146,0.156 10 false N 1.781,0.938 1.927,1.094 0.146,0.156 10 false K 1.896,1.719 2.042,1.875 0.146,0.156 10 false L 0.542,1.896 0.688,2.052 0.146,0.156 10 false N 0.583,7.75 0.885,7.948 0.302,0.198 10 false : *p 1.688,0.167 1.833,0.323 0.146,0.156 10 false M 1.698,0.552 1.844,0.708 0.146,0.156 10 false M 6.5,1.833 6.646,1.99 0.146,0.156 10 false O 5.813,1.833 5.958,1.99 0.146,0.156 10 false O 3.802,8.646 4.104,8.844 0.302,0.198 10 false *n 5.781,8.552 6.083,8.75 0.302,0.198 10 false *o
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d D - D Cross Section
*e E - E Cross Section *f F - F Cross Section
*g G - G Cross Section *h H - H Cross Section
*i I - I Cross Section *j J - J Cross Section
*k K - K Cross Section *l L - L Cross Section
*m M - M Cross Section *n N - N Cross Section
*o O - O Cross Section *p GL Grade, High Spec Van Only
*q GL Grade Only *r All Specification


High Roof Models: Slide Door Side (The illustration shown is an example only.)
V123580C01
1,3.833 1.313,3.99 0.313,0.156 10 false *a 2.833,3.833 3.146,3.99 0.313,0.156 10 false *b 4.75,3.844 5.063,4 0.313,0.156 10 false *c 6.021,3.833 6.333,3.99 0.313,0.156 10 false *d 0.688,5.25 1,5.406 0.313,0.156 10 false *e 2.104,5.26 2.417,5.417 0.313,0.156 10 false *f 3.688,5.25 4,5.417 0.313,0.167 10 false *g 5.771,5.333 6.083,5.49 0.313,0.156 10 false *h 0.854,6.844 1.167,7 0.313,0.156 10 false *i 2.188,6.844 2.5,7.083 0.313,0.24 10 false *j 3.688,6.833 4,6.99 0.313,0.156 10 false *k 5.75,6.844 6.063,7 0.313,0.156 10 false *l 2.104,8.427 2.417,8.583 0.313,0.156 10 false *m 3.583,8.417 3.896,8.573 0.313,0.156 10 false *n 4.917,8.427 5.229,8.583 0.313,0.156 10 false *o 6.188,8.677 6.5,8.833 0.313,0.156 10 false *p 0.583,8.052 0.885,8.25 0.302,0.198 10 false : *r 5.948,1.281 6.094,1.438 0.146,0.156 10 false A 0.583,8.344 0.885,8.542 0.302,0.198 10 false : *s 6.448,1.313 6.594,1.469 0.146,0.156 10 false A 6.375,1.677 6.521,1.833 0.146,0.156 10 false B 5.99,1.635 6.135,1.792 0.146,0.156 10 false B 4.792,1.667 4.938,1.823 0.146,0.156 10 false C 5.198,1.865 5.344,2.021 0.146,0.156 10 false C 5.094,0.521 5.24,0.677 0.146,0.156 10 false D 4.802,1.01 4.948,1.167 0.146,0.156 10 false D 4.594,0.75 4.74,0.906 0.146,0.156 10 false E 4.75,0.479 4.896,0.635 0.146,0.156 10 false E 4.083,0.917 4.229,1.073 0.146,0.156 10 false F 3.604,0.927 3.75,1.083 0.146,0.156 10 false F 3.583,1.25 3.729,1.406 0.146,0.156 10 false G 4.104,1.25 4.25,1.406 0.146,0.156 10 false G 3.583,1.833 3.729,1.99 0.146,0.156 10 false H 4.271,1.833 4.417,1.99 0.146,0.156 10 false H 3.417,0.083 3.563,0.24 0.146,0.156 10 false I 3.417,0.417 3.563,0.573 0.146,0.156 10 false I 2.021,1 2.167,1.156 0.146,0.156 10 false J 2.354,1.01 2.5,1.167 0.146,0.156 10 false J 2.063,1.354 2.208,1.51 0.146,0.156 10 false K 2.531,1.635 2.677,1.792 0.146,0.156 10 false L 2.438,2 2.583,2.156 0.146,0.156 10 false M 1.625,1.313 1.771,1.469 0.146,0.156 10 false N 1.667,2.01 1.813,2.167 0.146,0.156 10 false O 0.125,1.917 0.271,2.073 0.146,0.156 10 false P 2.271,1.354 2.417,1.51 0.146,0.156 10 false K 1.823,1.302 1.969,1.458 0.146,0.156 10 false N 2.01,1.635 2.156,1.792 0.146,0.156 10 false L 2.042,1.99 2.188,2.146 0.146,0.156 10 false M 1.865,2 2.01,2.156 0.146,0.156 10 false O 0.406,1.917 0.552,2.073 0.146,0.156 10 false P 0.583,7.719 0.885,7.917 0.302,0.198 10 false : *q
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d D - D Cross Section
*e E - E Cross Section *f F - F Cross Section
*g G - G Cross Section *h H - H Cross Section
*i I - I Cross Section *j J - J Cross Section
*k K - K Cross Section *l L - L Cross Section
*m M - M Cross Section *n N - N Cross Section
*o O - O Cross Section *p P - P Cross Section
*q GL Grade, High Spec Van Only *r GL Grade Only
*s All Specification - -


High Roof Models: Slide Door Less Side (The illustration shown is an example only.)
V123581C01
1.5,4.083 1.813,4.24 0.313,0.156 10 false *a 3.521,4.094 3.833,4.25 0.313,0.156 10 false *b 5.667,4.094 5.979,4.25 0.313,0.156 10 false *c 0.688,5.51 1,5.667 0.313,0.156 10 false *d 1.938,5.51 2.25,5.667 0.313,0.156 10 false *e 3.604,5.51 3.917,5.667 0.313,0.156 10 false *f 5.938,5.5 6.25,5.667 0.313,0.167 10 false *g 1.354,7 1.667,7.156 0.313,0.156 10 false *h 3.75,6.667 4.063,6.823 0.313,0.156 10 false *i 5.917,6.833 6.229,7.073 0.313,0.24 10 false *j 2.188,8.25 2.5,8.406 0.313,0.156 10 false *k 4.021,8.5 4.333,8.656 0.313,0.156 10 false *l 6.167,8.667 6.479,8.823 0.313,0.156 10 false *m 0.583,8.052 0.885,8.25 0.302,0.198 10 false : *o 5.948,1.281 6.094,1.438 0.146,0.156 10 false A 0.583,8.344 1.083,8.583 0.5,0.24 10 false : *p 6.448,1.313 6.594,1.469 0.146,0.156 10 false A 6.375,1.677 6.521,1.833 0.146,0.156 10 false B 5.99,1.635 6.135,1.792 0.146,0.156 10 false B 4.792,1.667 4.938,1.823 0.146,0.156 10 false C 5.198,1.865 5.344,2.021 0.146,0.156 10 false C 5.115,0.552 5.26,0.708 0.146,0.156 10 false D 4.823,1.042 4.969,1.198 0.146,0.156 10 false D 4.656,0.74 4.802,0.896 0.146,0.156 10 false E 4.771,0.531 4.917,0.688 0.146,0.156 10 false E 4.125,0.99 4.271,1.146 0.146,0.156 10 false F 3.635,0.99 3.781,1.146 0.146,0.156 10 false F 3.625,1.292 3.771,1.448 0.146,0.156 10 false G 4.115,1.26 4.26,1.417 0.146,0.156 10 false G 3.635,1.865 3.781,2.021 0.146,0.156 10 false H 4.313,1.854 4.458,2.01 0.146,0.156 10 false H 2.146,1.323 2.292,1.479 0.146,0.156 10 false I 2.344,1.323 2.49,1.479 0.146,0.156 10 false I 2.115,2 2.26,2.156 0.146,0.156 10 false J 2.323,2 2.469,2.156 0.146,0.156 10 false J 1.875,1.323 2.021,1.479 0.146,0.156 10 false K 1.927,2 2.073,2.156 0.146,0.156 10 false L 0.167,1.917 0.313,2.073 0.146,0.156 10 false M 1.667,1.323 1.813,1.479 0.146,0.156 10 false K 1.719,2 1.865,2.156 0.146,0.156 10 false L 0.458,1.917 0.604,2.073 0.146,0.156 10 false M 0.583,7.75 0.885,7.948 0.302,0.198 10 false : *n
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d D - D Cross Section
*e E - E Cross Section *f F - F Cross Section
*g G - G Cross Section *h H - H Cross Section
*i I - I Cross Section *j J - J Cross Section
*k K - K Cross Section *l L - L Cross Section
*m M - M Cross Section *n GL Grade, High Spec Van Only
*o GL Grade Only *p All Specification



ii.

Urethane foam is used to seal pillar cross sections, reducing the amount of noise that penetrates into the cabin.

Standard Roof Models (The illustration shown is an example only.)
V123585C01
1.042,5.865 0.625,5.448 0.625,5.448 0.542,5.448 true 3.823,5.198 3.406,4.781 3.406,4.781 3.323,4.781 true 6.396,5.208 5.979,4.792 5.979,4.792 5.896,4.792 true 1.083,7.583 0.667,7.167 0.667,7.167 0.583,7.167 true 4.021,7.438 3.604,7.021 3.604,7.021 3.521,7.021 true 1.021,0.25 1.333,0.5 0.313,0.25 12 false *A: 2.354,1.052 2.469,1.208 0.115,0.156 10 false A 0.396,5.375 0.708,5.531 0.313,0.156 10 false *1 3.167,4.708 3.479,4.865 0.313,0.156 10 false *2 5.74,4.729 6.052,4.885 0.313,0.156 10 false *3 1,6.427 1.313,6.583 0.313,0.156 10 false *a 1.135,8.042 1.448,8.198 0.313,0.156 10 false *b 3.729,6 4.042,6.156 0.313,0.156 10 false *c 3.719,8.583 4.031,8.74 0.313,0.156 10 false *d 6.323,8.5 6.635,8.656 0.313,0.156 10 false *e 1,2.333 1.313,2.583 0.313,0.25 12 false *B: 2.365,1.656 2.479,1.813 0.115,0.156 10 false A 2.115,1.344 2.229,1.5 0.115,0.156 10 false B 2.635,1.344 2.75,1.5 0.115,0.156 10 false B 4.531,1.052 4.646,1.208 0.115,0.156 10 false C 4.802,0.948 4.917,1.104 0.115,0.156 10 false D 5.354,1.073 5.469,1.229 0.115,0.156 10 false E 2.354,3.063 2.469,3.219 0.115,0.156 10 false A 2.344,3.688 2.458,3.844 0.115,0.156 10 false A 2.115,3.344 2.229,3.5 0.115,0.156 10 false B 2.615,3.344 2.729,3.5 0.115,0.156 10 false B 4.375,1.719 4.49,1.875 0.115,0.156 10 false C 4.542,3.052 4.656,3.208 0.115,0.156 10 false C 4.375,3.719 4.49,3.875 0.115,0.156 10 false C 4.802,1.542 4.917,1.698 0.115,0.156 10 false D 4.802,2.969 4.917,3.125 0.115,0.156 10 false D 4.802,3.552 4.917,3.708 0.115,0.156 10 false D 5.385,1.958 5.5,2.115 0.115,0.156 10 false E 5.365,3.094 5.479,3.25 0.115,0.156 10 false E 5.365,3.958 5.479,4.115 0.115,0.156 10 false E 0.448,7.083 0.76,7.24 0.313,0.156 10 false *1 3.365,6.948 3.677,7.104 0.313,0.156 10 false *2
*A Side with Rear Slide Door *B Side without Rear Slide Door
*1 Quarter Vent Silencer *2 Quarter Wheel House Pad Inner Front RH
*3 Quarter Wheel House Pad Inner Rear RH - -
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d D - D Cross Section
*e E - E Cross Section - -


High Roof Models (The illustration shown is an example only.)
V123584C01
0.917,5.833 0.5,5.417 0.5,5.417 0.417,5.417 true 2.833,5.5 2.417,5.083 2.417,5.083 2.333,5.083 true 4.75,5.417 4.333,5 4.333,5 4.25,5 true 6.333,5.333 5.917,4.917 5.917,4.917 5.833,4.917 true 1.083,7.583 0.667,7.167 0.667,7.167 0.583,7.167 true 4.667,7.667 4.25,7.25 4.25,7.25 4.167,7.25 true 1.021,0.25 1.333,0.5 0.313,0.25 12 false *A: 2.188,1.021 2.302,1.177 0.115,0.156 10 false A 0.271,5.344 0.583,5.5 0.313,0.156 10 false *1 2.177,5 2.49,5.156 0.313,0.156 10 false *2 5.688,4.833 6,4.99 0.313,0.156 10 false *3 0.948,6.375 1.26,6.531 0.313,0.156 10 false *a 1.094,7.969 1.406,8.125 0.313,0.156 10 false *b 2.771,8.656 3.083,8.813 0.313,0.156 10 false *c 4.563,6.594 4.875,6.75 0.313,0.156 10 false *d 4.646,8.542 4.958,8.698 0.313,0.156 10 false *e 6.375,8.594 6.688,8.75 0.313,0.156 10 false *f 1,2.333 1.313,2.583 0.313,0.25 12 false *B: 2.177,1.656 2.292,1.813 0.115,0.156 10 false A 1.938,1.302 2.052,1.458 0.115,0.156 10 false B 2.448,1.323 2.563,1.479 0.115,0.156 10 false B 4.375,1.073 4.49,1.229 0.115,0.156 10 false C 4.677,0.948 4.792,1.104 0.115,0.156 10 false D 4.896,0.958 5.01,1.115 0.115,0.156 10 false E 5.406,1.021 5.521,1.177 0.115,0.156 10 false F 2.198,3.031 2.313,3.188 0.115,0.156 10 false A 2.188,3.656 2.302,3.813 0.115,0.156 10 false A 1.948,3.323 2.063,3.479 0.115,0.156 10 false B 2.458,3.333 2.573,3.49 0.115,0.156 10 false B 4.375,1.927 4.49,2.083 0.115,0.156 10 false C 4.375,3.083 4.49,3.24 0.115,0.156 10 false C 4.385,3.948 4.5,4.104 0.115,0.156 10 false C 4.542,1.615 4.656,1.771 0.115,0.156 10 false D 4.698,2.958 4.813,3.115 0.115,0.156 10 false D 4.552,3.615 4.667,3.771 0.115,0.156 10 false D 4.885,1.521 5,1.677 0.115,0.156 10 false E 4.885,2.99 5,3.146 0.115,0.156 10 false E 4.896,3.531 5.01,3.688 0.115,0.156 10 false E 5.406,1.906 5.521,2.063 0.115,0.156 10 false F 5.406,3.031 5.521,3.188 0.115,0.156 10 false F 5.417,3.917 5.531,4.073 0.115,0.156 10 false F 4.115,4.917 4.427,5.073 0.313,0.156 10 false *2 0.448,7.083 0.76,7.24 0.313,0.156 10 false *1 4.021,7.167 4.333,7.323 0.313,0.156 10 false *2
*A Side with Rear Slide Door *B Side without Rear Slide Door
*1 Quarter Vent Silencer *2 Quarter Wheel House Pad Inner Front RH
*3 Quarter Wheel House Pad Inner Rear RH - -
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section *d D - D Cross Section
*e E - E Cross Section *f F - F Cross Section



iii.

Damping sheets are provided near the quarter panel, reducing interior noise (operational noise / muffled sounds).

Standard Roof Models: VX Grade, GL Grade
V123589C01
3.667,1.198 4.167,0.5 4.167,0.5 4.865,1.323 true 3.635,4.083 4.167,3.333 4.167,3.333 4.771,4.188 true 1,0.427 1.333,0.667 0.333,0.24 12 false *A: 4.104,0.344 4.271,0.5 0.167,0.156 10 false *1 1,3.083 1.333,3.323 0.333,0.24 12 false *B: 4.115,3.177 4.281,3.333 0.167,0.156 10 false *1
*A Side with Rear Slide Door *B Side without Rear Slide Door
*1 Quarter Panel Silencer Sheet - -


Standard Roof Models: DX Grade (Models with Quarter Panel Silencer Sheet)
V123590C01
4.917,1.667 5.833,0.75 5.833,0.75 5.917,0.75 true 5.958,0.677 6.271,0.833 0.313,0.156 10 false *1
*1 Quarter Panel Silencer Sheet - -


High Roof Models: GL Grade
V123587C01
3.583,1.25 4.167,0.5 4.167,0.5 4.75,1.25 true 3.583,4.083 4.167,3.333 4.167,3.333 4.75,4.083 true 1,0.427 1.333,0.667 0.333,0.24 12 false *A: 4.104,0.344 4.271,0.5 0.167,0.156 10 false *1 1,3.083 1.333,3.323 0.333,0.24 12 false *B: 4.115,3.177 4.281,3.333 0.167,0.156 10 false *1
*A Side without Rear Slide Door *B Side with Rear Slide Door
*1 Quarter Panel Silencer Sheet - -


High Roof Models: DX Grade (Models with Quarter Panel Silencer Sheet)
V123588C01
4.917,1.667 5.833,0.75 5.833,0.75 5.917,0.75 true 5.958,0.677 6.271,0.833 0.313,0.156 10 false *1
*1 Quarter Panel Silencer Sheet - -




d.

Sound Absorption and Insulation Structure around Engine Compartment

i.

A hood insulator (*2 in illustration) is provided below the hood sub-assembly (*1 in illustration) and the cowl top insulator sheet (*5 in illustration) is provided below the cowl top panel sub-assembly outer (*6 in illustration) to suppress engine drive noise which penetrates the cabin and provide excellent quietness.

Hood Insulator and Cowl Top Insulator Sheet (The illustration shown is an example only.)
V123586C01
2.25,1.833 1.583,1.167 1.583,1.167 1.5,1.167 true 2.25,1.417 1.583,0.75 1.583,0.75 1.5,0.75 true 5.167,3.417 5.083,3.417 5.083,3.417 4.25,2.583 true 1.667,6.052 1.25,5.635 1.25,5.635 1.167,5.635 true 3.729,6.302 3.646,6.302 3.646,6.302 3.229,5.885 true 5.677,6.292 5.594,6.292 5.594,6.292 5.177,5.875 true 6.167,6 6.083,6 6.083,6 5.667,5.583 true 5.573,5.094 5.99,4.677 5.99,4.677 6.073,4.677 true 4.823,5.281 5.24,4.865 5.24,4.865 5.323,4.865 true 1.365,0.667 1.677,0.823 0.313,0.156 10 false *1 1.333,1.083 1.646,1.24 0.313,0.156 10 false *2 5.365,4.781 5.677,4.938 0.313,0.156 10 false *3 6.115,4.583 6.427,4.74 0.313,0.156 10 false *4 5.188,3.323 5.5,3.479 0.313,0.156 10 false *5 6.208,5.906 6.521,6.063 0.313,0.156 10 false *6 3.688,6.99 4,7.146 0.313,0.156 10 false *a 1.865,3.417 2.021,3.573 0.156,0.156 10 false A 3.521,1.396 3.677,1.552 0.156,0.156 10 false A 5.74,6.208 6.052,6.365 0.313,0.156 10 false *5 3.781,6.208 4.094,6.365 0.313,0.156 10 false *2 1.031,5.552 1.344,5.708 0.313,0.156 10 false *1
*1 Hood Sub-assembly *2 Hood Insulator
*3 Cowl Top Ventilator Louver Sub-assembly *4 Cowl Assembly
*5 Cowl Top Insulator Sheet *6 Cowl Top Panel Sub-assembly Outer
*a A - A Cross Section - -



ii.

Damping sheets (cowl top insulator sheet No. 2) are provided for the cowl top panel sub-assembly outer, reducing interior noise (operational noise / muffled sounds).*

HINT:

*: VX grade, GL grade


Cowl Top Insulator Sheet No. 2 (The illustration shown is an example only.)
V123591C01
0.656,1.698 2.323,1.698 true 4.417,2.25 6.083,2.25 true 1.625,0.885 1.729,0.896 1.729,0.896 2.375,1.552 true 1.469,0.792 1.781,0.948 0.313,0.156 10 false *1 0.51,1.604 0.823,1.76 0.313,0.156 10 false *2 6.125,2.167 6.438,2.323 0.313,0.156 10 false *2
*1 Cowl Top Panel Sub-assembly Outer *2 Cowl Top Insulator Sheet No. 2



iii.

Steel sandwich panel filler damping materials (dash panel insulator plate No. 1) are provided in the dash panel sub-assembly. As a result, steel sandwich panel filler damping materials reduce road and engine noise which enters the cabin.

Dash Panel Insulator Plate No. 1 (LHD Models)
V123592C01
0.563,4.469 0.646,4.469 0.646,4.469 1.729,3.385 true 2.5,0.75 2.583,0.75 2.583,0.75 3.917,2.083 true 0.417,4.396 0.729,4.552 0.313,0.156 10 false *1 2.354,0.667 2.542,0.833 0.188,0.167 10 false *2
*1 Dash Panel Sub-assembly *2 Dash Panel Insulator Plate No. 1


Dash Panel Insulator Plate No. 1 (RHD Models)
V123593C01
0.833,4.5 0.917,4.5 0.917,4.5 2.417,3 true 3.292,0.542 3.375,0.542 3.375,0.542 4.708,1.875 true 3.146,0.448 3.458,0.604 0.313,0.156 10 false *1 0.688,4.406 0.875,4.573 0.188,0.167 10 false *2
*1 Dash Panel Sub-assembly *2 Dash Panel Insulator Plate No. 1



iv.

The dash outer silencer (dash panel insulator outer: *1 in illustration "Dash Panel Insulator Outer") is provided in the engine room side of the dash panel sub-assembly (*2 in illustration) and a dash panel insulator assembly (*1 in illustration "Dash Panel Insulator Outer") is provided in the cabin side. The dash panel insulator assembly (*1 in illustration "Dash Panel Insulator Assembly") wraps around the top of the cowl panel (dash panel RR: *3 in illustration "Dash Panel Insulator Assembly") and has a shape which fills in holes and gaps as much as possible. This structure absorbs and insulates mechanical noise such as engine noise and ensures excellent quietness.

Dash Panel Insulator Outer (LHD Models)
V123594C01
2.25,1.917 3.583,0.583 3.583,0.583 3.667,0.583 true 2.583,2.167 3.667,3.333 3.667,3.333 3.75,3.333 true 4.917,1.083 5,1.083 5,1.083 5.417,1.5 true 4.76,2.99 4.844,2.99 4.844,2.99 5.26,2.573 true 3.698,0.5 4.01,0.656 0.313,0.156 10 false *1 3.802,3.25 4.115,3.406 0.313,0.156 10 false *2 5.354,3.583 5.667,3.74 0.313,0.156 10 false *a 4.76,1 5.073,1.156 0.313,0.156 10 false *2 4.604,2.906 4.917,3.063 0.313,0.156 10 false *1 2.177,1.083 2.49,1.24 0.313,0.156 10 false A 2.146,2.229 2.458,2.385 0.313,0.156 10 false A
*1 Dash Panel Insulator Outer *2 Dash Panel Sub-assembly
*a A - A Cross Section - -


Dash Panel Insulator Assembly (LHD Models)
V123596C01
1.125,2.688 1.208,2.688 1.208,2.688 1.625,2.271 true 6.25,2.083 6.667,1.667 6.667,1.667 6.75,1.667 true 5.583,2.333 5.667,2.333 5.667,2.333 6.083,1.917 true 5.042,1.313 5.125,1.313 5.125,1.313 5.542,0.896 true 6.771,1.594 7.083,1.75 0.313,0.156 10 false *1 5.417,2.25 5.729,2.406 0.313,0.156 10 false *2 5.688,3.427 6,3.583 0.313,0.156 10 false *a 4.896,1.219 5.208,1.375 0.313,0.156 10 false *3 0.99,2.604 1.302,2.76 0.313,0.156 10 false *1 2.188,0.823 2.5,0.979 0.313,0.156 10 false A 2.188,2.385 2.5,2.542 0.313,0.156 10 false A
*1 Dash Panel Silencer Assembly *2 Dash Panel Sub-assembly
*3 Cowl Assembly - -
*a A - A Cross Section - -


Dash Panel Insulator Outer (RHD Models)
V123595C01
2.5,2.083 3.833,0.75 3.833,0.75 3.917,0.75 true 0.833,0.583 0.917,0.583 0.917,0.583 1.833,1.5 true 4.938,1.083 5.021,1.083 5.021,1.083 5.438,1.5 true 4.854,2.667 4.938,2.667 4.938,2.667 5.354,2.25 true 3.938,0.656 4.25,0.813 0.313,0.156 10 false *1 0.677,0.5 0.99,0.656 0.313,0.156 10 false *2 5.344,3.208 5.656,3.365 0.313,0.156 10 false *a 4.771,1 5.083,1.156 0.313,0.156 10 false *2 4.698,2.583 4.875,2.74 0.177,0.156 10 false *1 2.365,1.188 2.49,1.354 0.125,0.167 10 false A 2.365,2.375 2.49,2.542 0.125,0.167 10 false A
*1 Dash Panel Insulator Outer *2 Dash Panel Sub-assembly
*a A - A Cross Section - -


Dash Panel Insulator Assembly (RHD Models)
V123597C01
1.125,2.688 1.208,2.688 1.208,2.688 1.625,2.271 true 5.896,3 6.313,2.583 6.313,2.583 6.396,2.583 true 5.208,2.958 5.292,2.958 5.292,2.958 5.708,2.542 true 4.833,1.354 4.917,1.354 4.917,1.354 5.333,0.938 true 6.427,2.5 6.74,2.656 0.313,0.156 10 false *1 5.052,2.865 5.24,3.031 0.188,0.167 10 false *2 5.688,3.427 6,3.583 0.313,0.156 10 false *a 4.688,1.26 4.865,1.427 0.177,0.167 10 false *3 0.99,2.604 1.302,2.76 0.313,0.156 10 false *1 2.188,0.823 2.5,0.979 0.313,0.156 10 false A 2.188,2.385 2.5,2.542 0.313,0.156 10 false A
*1 Dash Panel Silencer Assembly *2 Dash Panel Sub-assembly
*3 Cowl Assembly - -
*a A - A Cross Section - -



v.

The front fender side panel protector is provided to reduce the engine noise which enters the cabin.

Front Fender Side Panel Protector
V123598C01
5.438,3 5.438,2.5 true 0.583,2.917 0.667,2.917 0.667,2.917 1.333,2.25 true 4.563,3.146 4.646,3.146 4.646,3.146 5.313,2.479 true 4.333,2.917 4.417,2.917 4.417,2.917 4.667,2.667 true 4.25,1.802 4.75,1.802 true 6.75,1.167 6.667,1.167 6.667,1.167 6.25,1.583 true 6.833,2.417 6.75,2.417 6.75,2.417 6.333,2 true 6.5,3.083 6.417,3.083 6.417,3.083 6,2.667 true 0.448,2.833 0.76,2.99 0.313,0.156 10 false *1 4.188,2.833 4.354,2.979 0.167,0.146 10 false *2 6.781,1.083 6.927,1.24 0.146,0.156 10 false *3 6.552,3.01 6.708,3.156 0.156,0.146 10 false *4 6.875,2.344 7.031,2.49 0.156,0.146 10 false *5 5.385,3.458 5.698,3.615 0.313,0.156 10 false *a 4.104,1.719 4.417,1.875 0.313,0.156 10 false *b 1.615,1.823 1.771,1.979 0.156,0.156 10 false A 1.01,2.073 1.167,2.229 0.156,0.156 10 false A 5.365,3 5.677,3.156 0.313,0.156 10 false *b 4.417,3.063 4.583,3.219 0.167,0.156 10 false *1
*1 Front Fender Side Panel Protector LH *2 Front Fender Panel LH
*3 Front Side Panel Outer LH *4 Front Door Panel Outer LH
*5 Front Door Panel Inside LH - -
*a A - A Cross Section *b Caulking Sponge
V100135

Noise - -



vi.

The fender apron mudguard seal sub-assembly and fender apron mudguard seal* are used in the front fender to reduce the noise which travels through the fender toward the cabin.

HINT:

*: VX grade, GL grade


Side Seal, Apron Seal (The illustration shown is an example only.)
V123599C01
5.417,1.167 5,0.75 5,0.75 4.917,0.75 true 6.167,0.333 6.083,0.333 6.083,0.333 5.667,0.75 true 6.417,1 6.333,1 6.333,1 5.917,1.417 true 6.417,2.25 6.333,2.25 6.333,2.25 5.917,2.667 true 4.771,0.677 4.938,0.833 0.167,0.156 10 false *1 6.448,0.927 6.76,1.083 0.313,0.156 10 false *2 6.198,0.25 6.51,0.406 0.313,0.156 10 false *3 6.448,2.177 6.76,2.333 0.313,0.156 10 false *4 5.635,3.458 5.948,3.615 0.313,0.156 10 false *a 2.323,1.781 2.438,1.948 0.115,0.167 10 false A 2.344,2.76 2.458,2.927 0.115,0.167 10 false A
*1 Fender Apron Mudguard Seal Sub-assembly LH *2 Front Fender Panel LH
*3 Hood Panel *4 Fender Apron Mudguard Seal LH
*a A - A Cross Section - -



vii.

An insulator with superior sound absorption effects (sound insulation material) is used around the front fender liner and rear wheel house liner* to suppress the sound created by flying sand and water from the wheelhouse and road noise in order to provide excellent quietness.

HINT:

*: VX grade


DX Grade, GL Grade (The illustration shown is an example only.)
V123639C01
5.583,1.667 6,2.083 6,2.083 6.083,2.083 true 5.75,1.333 6.167,0.917 6.167,0.917 6.25,0.917 true 4.021,0.885 4.333,1.042 0.313,0.156 10 false *1 6.281,0.833 6.594,0.99 0.313,0.156 10 false *a 6.125,2 6.438,2.156 0.313,0.156 10 false *a
*1 Front Fender Liner LH - -
*a Insulator - -


VX Grade (The illustration shown is an example only.)
V124150C01
5.583,1.333 6,1.75 6,1.75 6.083,1.75 true 5.833,0.917 6.25,0.5 6.25,0.5 6.333,0.5 true 5.833,4.167 6.25,3.75 6.25,3.75 6.333,3.75 true 5.167,3.583 5.583,3.167 5.583,3.167 5.667,3.167 true 2.583,2.333 3,2.75 3,2.75 3.083,2.75 true 0.667,5.333 0.75,5.333 0.75,5.333 1.167,4.917 true 4.75,4.667 4.833,4.667 4.833,4.667 5.25,4.25 true 4.333,1.083 4.417,1.083 4.417,1.083 4.833,1.5 true 3.104,2.677 3.417,2.833 0.313,0.156 10 false *1 0.521,5.25 0.833,5.406 0.313,0.156 10 false *2 6.104,1.667 6.417,1.823 0.313,0.156 10 false *a 6.375,0.427 6.688,0.583 0.313,0.156 10 false *a 6.354,3.677 6.667,3.833 0.313,0.156 10 false *a 5.688,3.094 6,3.25 0.313,0.156 10 false *a 4.188,1 4.5,1.156 0.313,0.156 10 false *1 4.594,4.583 4.906,4.74 0.313,0.156 10 false *2
*1 Front Fender Liner LH *2 Rear Wheel House Liner LH
*a Insulator - -




e.

Window Area

i.

An acoustic layer laminated glass*1 is used for the windshield glass (*1 in illustration), reducing noise that enters from the outside to the cabin through the doors.*2

HINT:

*1: Glass including a high level of sound proofing interlayer with a laminated glass structure (Glass - Interlayer - Glass)

*2: VX grade, GL grade



ii.

1-sided adhesive molding (windshield molding outside (*3 in illustration)) is used to reduce the difference in height between the windshield glass and roof panel (C in illustration), and dampen wind noise.


iii.

The difference in height between the windshield molding outside No. 2 and windshield glass (D in illustration), the width of the front body pillar (front side panel outer: E in illustration) and the corner shape of the front body pillar (front side panel outer: R in illustration) have been optimized to dampen wind noise.

Window Area (The illustration shown is an example only.)
V123601C01
0.917,4.26 1,4.26 1,4.26 1.25,4.51 true 1,6.042 1.083,6.042 1.083,6.042 1.5,5.625 true 2.698,5.792 2.615,5.792 2.615,5.792 2.198,5.375 true 4.583,5.167 4.667,5.167 4.667,5.167 5.417,4.417 true 6.167,4.5 6.583,4.083 6.583,4.083 6.667,4.083 true 2.667,4.75 2.25,4.333 2.25,4.333 2.167,4.333 true 0.854,5.948 1,6.125 0.146,0.177 10 false *1 2.021,4.25 2.333,4.406 0.313,0.156 10 false *2 2.729,5.698 2.906,5.854 0.177,0.156 10 false *3 6.688,4 6.854,4.177 0.167,0.177 10 false *4 4.427,5.073 4.583,5.24 0.156,0.167 10 false *5 4.156,0.563 4.271,0.719 0.115,0.156 10 false A 1.948,6.333 2.26,6.49 0.313,0.156 10 false *a 5.563,6.375 5.875,6.531 0.313,0.156 10 false *b 0.781,4.167 0.958,4.323 0.177,0.156 10 false *c 1.688,5.031 1.844,5.188 0.156,0.156 10 false C 3.875,0.938 3.99,1.094 0.115,0.156 10 false A 3.219,0.875 3.333,1.031 0.115,0.156 10 false B 2.813,0.688 2.927,0.844 0.115,0.156 10 false B 5.469,3.885 5.594,4.042 0.125,0.156 10 false E 4.792,4.25 4.917,4.406 0.125,0.156 10 false D 5.802,4.448 5.927,4.604 0.125,0.156 10 false R
*1 Windshield Glass *2 Roof Panel Front
*3 Windshield Molding Outside *4 Front Side Panel Outer RH
*5 Windshield Molding Outside No. 2 RH - -
*a A - A Cross Section *b B - B Cross Section
*c Acoustic Layer - -



iv.

A cowl vent seal (*2 in illustration) is provided behind the hood sub-assembly (*1 in illustration) to create a structure that diverts the air flow, suppressing the generation of wind noise.

Cowl Vent Seal (The illustration shown is an example only.)
V123602C01
6.833,2.167 6.75,2.167 6.75,2.167 6.333,1.75 false 5.385,2.75 4.969,3.167 4.969,3.167 4.885,3.167 false 4.667,1.5 4,2.167 4,2.167 3.917,2.167 true 4.667,0.854 4.25,0.438 4.25,0.438 4.167,0.438 false 1.323,1.333 0.906,0.917 0.906,0.917 0.823,0.917 true 0.927,1.854 0.51,1.438 0.51,1.438 0.427,1.438 true 0.281,1.344 0.438,1.51 0.156,0.167 10 false *1 3.771,2.073 3.958,2.24 0.188,0.167 10 false *2 4.729,3.073 4.917,3.24 0.188,0.167 10 false *3 6.875,2.083 7.063,2.24 0.188,0.156 10 false *4 5.427,3.427 5.74,3.583 0.313,0.156 10 false *a 2.198,1.385 2.302,1.542 0.104,0.156 10 false A 1.771,1.729 1.875,1.885 0.104,0.156 10 false A 0.688,0.823 0.875,0.99 0.188,0.167 10 false *2 4.031,0.333 4.188,0.5 0.156,0.167 10 false *1
*1 Hood Sub-assembly *2 Cowl Vent Seal
*3 Cowl Top Panel Sub-assembly Outer *4 Cowl Top Ventilator Louver Sub-assembly
*a A - A Cross Section - -
V100135

Airflow - -



v.

A dynamic damper*1 (windshield header panel damper sub-assembly RH) is provided for the windshield header panel sub-assembly, reducing muffled sounds that are input from the road surface at the rear seats.*2

HINT:

*1: A suppression device that uses additional mass and specific spring resonant frequencies to absorb or control excessive vibration.

*2: VX grade, GL grade of standard roof models


Dynamic Damper (The illustration shown is an example only.)
V123603C01
1.083,4.417 0.667,4 0.667,4 0.583,4 true 2.583,5.333 2.5,5.333 2.5,5.333 2.083,4.917 true 2.167,5.5 2.083,5.5 2.083,5.5 1.667,5.083 true 5.583,5.479 5.5,5.479 5.5,5.479 5.083,5.063 true 2.219,5.417 2.396,5.583 0.177,0.167 10 false *1 2.635,5.25 2.948,5.406 0.313,0.156 10 false *2 0.438,3.927 0.615,4.083 0.177,0.156 10 false *3 3.646,1.625 3.771,1.781 0.125,0.156 10 false A 1.417,5.469 1.729,5.625 0.313,0.156 10 false *a 3.823,2.198 3.938,2.365 0.115,0.167 10 false B 4.771,5.531 5.083,5.688 0.313,0.156 10 false *b 5.625,5.385 5.802,5.552 0.177,0.167 10 false *1 3.146,2.188 3.271,2.344 0.125,0.156 10 false A 2.802,1.677 2.917,1.844 0.115,0.167 10 false B
*1 Windshield Header Panel Damper Sub-assembly RH *2 Windshield Header Panel Sub-assembly
*3 Roof Panel Front - -
*a A - A Cross Section *b B - B Cross Section



vi.

A floor panel side plate is provided for the fastening area of the rear seat and body side surface, reducing the amount of vibration transmitted from the body side surface.*

HINT:

*: RHD high roof 4-door commuter models


Floor Panel Side Plate (The illustration shown is an example only.)
V123604C01
4.833,2.333 5.833,1.333 5.833,1.333 5.917,1.333 true 2.417,3.583 2.5,3.583 2.5,3.583 3.25,2.833 true 5.969,1.26 6.281,1.417 0.313,0.156 10 false *1 2.271,3.5 2.427,3.656 0.156,0.156 10 false *2
*1 Floor Panel Side Plate RH *2 Rear Seat



vii.

Also, a mass damper (frame weight RR) is provided for the engine rear mounting member sub-assembly, reducing transmission gear noise.*

HINT:

*: Models with 1GD-FTV engine, models with 7GR-FKS engine and manual transmission


Mass Damper (The illustration shown is an example only.)
V123605C01
0.667,3.083 0.75,3.083 0.75,3.083 2.333,1.5 true 5.417,2.917 5.833,2.417 5.833,2.417 5.917,2.917 true 0.438,3 0.583,3.167 0.146,0.167 10 false *1 5.792,2.24 6.104,2.396 0.313,0.156 10 false *2
*1 Engine Rear Mounting Member Sub-assembly *2 Frame Weight RR



viii.

A center bearing bracket rear is provided near the propeller shaft fastening area, reducing the amount of engine vibration.*

HINT:

*: High roof models


Center Bearing Bracket Rear (The illustration shown is an example only.)
V123606C01
4.479,1.625 4.563,1.625 4.563,1.625 5.479,2.542 true 4.333,1.531 4.51,1.698 0.177,0.167 10 false *1
*1 Center Bearing Bracket Rear - -