Home › Suspension › REAR SUSPENSION › REAR SUSPENSION SYSTEM › from 2019.06
NM35X0E _53 Suspension _078815 REAR SUSPENSION _0389946 REAR SUSPENSION SYSTEM DE DETAILS F

REAR SUSPENSION  REAR SUSPENSION SYSTEM  DETAILS  SHOCK ABSORBER  


CONSTRUCTION


a.

Except Wagon Models

i.

The shock absorber is installed so that it angles forward from the rear side of the leaf spring, ensuring driving stability and a comfortable ride.


ii.

A bush with an inter-ring is used for the upper and lower parts of the shock absorber assembly. As a result, rigidity is optimized and driving stability is ensured while reducing vibration and noise.


iii.

The shape of the piston valve is optimized, achieving linear responsiveness when switching between expansion and contraction.

X143710C01
4.667,0.563 5.167,0.563 true 4.667,2.5 5.167,2.5 true 4.708,1.01 5.208,1.01 true 4.688,1.5 5.188,1.5 true 4.677,1.844 5.177,1.844 true 1.667,2.75 2.5,2.75 true 2.271,4.479 3,3.938 true 2.104,4.438 2.417,4.635 0.313,0.198 10 false *1 1.49,2.656 1.802,2.854 0.313,0.198 10 false *1 5.188,0.479 5.5,0.677 0.313,0.198 10 false *2 5.188,2.417 5.5,2.615 0.313,0.198 10 false *2 5.219,1.417 5.531,1.615 0.313,0.198 10 false *4 5.229,0.927 5.542,1.125 0.313,0.198 10 false *3 5.208,1.771 5.521,1.969 0.313,0.198 10 false *5
*1 Rear Shock Absorber Assembly *2 Rear Shock Absorber Bush
*3 Oil Seal *4 Rebound Stopper
*5 Piston Valve - -
V100143

Low-pressure (N2) Gas - -




b.

Wagon Models

i.

The shock absorber is installed so that it angles forward from the rear side of the coil spring, ensuring driving stability and a comfortable ride.


ii.

A bush with an inter-ring is used for the upper part of the shock absorber assembly. As a result, rigidity is optimized and driving stability is ensured while reducing vibration and noise.


iii.

A bush with integrated inner and outer tubes is used for the lower part of the shock absorber assembly. The inner tube is designed with a bulge shape (convex shape) for optimized rigidity. As a result, driving stability is ensured while reducing vibration and noise.


iv.

The shape of the piston valve is optimized, achieving linear responsiveness when switching between expansion and contraction.

X144021C01
4.635,0.531 5.135,0.531 true 4.635,2.344 5.135,2.344 true 4.698,1 5.198,1 true 4.688,1.458 5.188,1.458 true 4.677,1.677 5.177,1.677 true 1.844,2.573 2.677,2.646 true 1.604,3.271 3.021,3.656 true 1.438,3.188 1.75,3.385 0.313,0.198 10 false *1 1.677,2.49 1.99,2.688 0.313,0.198 10 false *1 5.167,0.448 5.479,0.646 0.313,0.198 10 false *2 5.188,2.26 5.5,2.458 0.313,0.198 10 false *2 5.219,1.375 5.531,1.573 0.313,0.198 10 false *4 5.24,0.938 5.552,1.135 0.313,0.198 10 false *3 5.208,1.604 5.521,1.802 0.313,0.198 10 false *5
*1 Rear Shock Absorber Assembly *2 Rear Shock Absorber Bush
*3 Oil Seal *4 Rebound Stopper
*5 Piston Valve - -
V100143

Low-pressure (N2) Gas - -