CONSTRUCTION (2019/06 - 2019/12)
A hollow structure that combines 2 vertical parts is used for the lower control arm, ensuring rigidity while reducing weight. As a result, the unsprung mass is reduced to achieve a comfortable interior space.
The bush of the upper control arm is provided with a vertical holes for optimized rigidity. As a result, driving stability is ensured while reducing vibration and noise.
| *a | Cross Section of Upper Control Arm Assembly | *b | Cross Section of Lower Control Arm Assembly |
CONSTRUCTION (2019/12 - )
A hollow structure that combines 2 vertical parts is used for the lower control arm, ensuring rigidity while reducing weight. As a result, the unsprung mass is reduced to achieve a comfortable interior space.
A mass damper is used around the bush installation on the body installation side for the upper control arm assembly to help reduce noise.
The bush of the upper control arm is provided with a vertical holes for optimized rigidity. As a result, driving stability is ensured while reducing vibration and noise.
| *a | Cross Section of Upper Control Arm Assembly | *b | Mass Damper |
| *c | Cross Section of Lower Control Arm Assembly | - |