CONSTRUCTION
A stabilizer bar is used, achieving a stable posture during cornering. Additionally, a hollow type is used to ensure rigidity and achieve weight reduction. A mass damper is provided at the both ends , reducing vibration and noise.
A ball joint type stabilizer link is used, improving driving stability.
A saddle type stabilizer bush, which is secured with a bracket, is used to ensure excellent fastening performance. Also, a fluorine coating is used at the contact surface with the rear stabilizer bar, reducing friction. As a result, driving stability is ensured while improving ride comfort.
| *1 | Rear Stabilizer Link Assembly | *2 | Rear Stabilizer Bar |
| *3 | Rear Stabilizer Bush | - | - |
| *a | Mass Damper | *b | Cross Section |
| *c | Fluorine Coating | - | - |