Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › from 2019.06
NM35X0E _54 Brake _078818 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0384782 BRAKE CONTROL SYSTEM DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  DETAILS  BRAKE PEDAL LOAD SENSING SWITCH  


CONSTRUCTION


a.

The depression pressure of the brake pedal is detected by the brake pedal load sensing switch installed to the brake pedal support assembly.


b.

The skid control ECU uses the brake pedal load sensing switch signal as the control information of the servo abnormal assist control.

X144017C01
1.115,1.281 2.302,0.771 true 0.938,1.198 1.25,1.354 0.313,0.156 10 false *1 3.563,0.594 3.875,0.75 0.313,0.156 10 false *a
*1 Brake Pedal Load Sensing Switch - -
*a Cross Section - -