Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM › from 2020.05
NM35X0E _51 Engine / Hybrid System _080139 1GD-FTV ENGINE CONTROL _0389533 ECD SYSTEM CO CONTROL F

1GD-FTV ENGINE CONTROL  ECD SYSTEM  CONTROL  ELECTRIC WATER PUMP CONTROL  


FUNCTION


a.

This engine uses a cooling system for the intercooler assembly independent from the engine cooling system, and the flow of engine coolant is controlled through the electric water pump assembly.


b.

The ECM receives the pump motor rotation pulse signal from the driver circuit and determines the pump motor speed in order to achieve the optimal intercooler coolant flow rate in accordance with the driving conditions at that time.

W139936E03
0.24,0.271 1.875,0.75 1.635,0.479 10 false Mass Air Flow Meter Sub-assembly 0.323,1.458 1.917,1.844 1.594,0.385 10 false Accelerator Pedal Sensor Assembly 0.302,1.01 2.063,1.281 1.76,0.271 10 false Crankshaft Position Sensor 0.167,2.25 2.073,2.531 1.906,0.281 10 false Diesel Throttle Body Assembly 0.188,4.396 2.094,4.667 1.906,0.271 10 false Intake Air Temperature Sensor 0.188,3.625 2.083,3.99 1.896,0.365 10 false Intake Air Temperature Sensor (For Intercooler) 0.198,5.073 2.01,5.354 1.813,0.281 10 false Combination Meter Assembly 0.198,3.021 2.063,3.427 1.865,0.406 10 false Diesel Turbo Pressure Sensor 0.26,5.521 2.021,5.896 1.76,0.375 10 false Engine Coolant Temperature Sensor (For Intercooler) 3.458,2.771 3.844,3.021 0.385,0.25 10 false ECM 5.823,2.458 7.052,2.719 1.229,0.26 10 false Water Pump Motor 4.76,2.792 5.583,3.042 0.823,0.25 10 false Driver Circuit 5.635,1.448 6.531,1.708 0.896,0.26 10 false Main Relay 4.615,3.615 6.615,3.875 2,0.26 10 false Electric Water Pump Assembly