Home › Engine / Hybrid System › 1GD-FTV (INTAKE / EXHAUST) › INTAKE SYSTEM › from 2020.05
NM35X0E _51 Engine / Hybrid System _080143 1GD-FTV INTAKE / EXHAUST _0389537 INTAKE SYSTEM DE DETAILS F

1GD-FTV INTAKE / EXHAUST  INTAKE SYSTEM  DETAILS  INTERCOOLER  


CONSTRUCTION


a.

Models with Air-cooled Intercooler

i.

An air-cooled intercooler assembly is used in order to lower the intake air temperature, improve engine performance and achieve cleaner exhaust gas emissions. It is located in front of the radiator assembly.


ii.

The intercooler assembly is made of aluminum.

W142451C01
3.604,1.656 4.729,0.813 true 4.76,0.656 5.073,0.875 0.313,0.219 10 false *1
*1 Intercooler Assembly - -




b.

Models with Water-cooled Intercooler

i.

A water-cooled intercooler assembly is used. Control is performed for the intake air temperature when the outside air temperature is low, enabling the introduction of EGR gas and achieving cleaner exhaust gas.

W142450C01
2.417,0.5 3.51,0.604 true 2.229,0.406 2.542,0.604 0.313,0.198 10 false *1 1.156,1.708 1.469,1.906 0.313,0.198 10 false *a 2.792,3.458 3.104,3.656 0.313,0.198 10 false *b
*1 Intercooler Assembly - -
*a From Intercooler Cooling Radiator Assembly *b To Intercooler Reserve Tank Assembly
V100135

Coolant Flow
V100136

Intake Air Flow