OUTLINE
Design Theme (DX, GL Grade)
Pro-TECH COMFORT (Comfortable spaces for both the driver and passengers)
Aim to create a friendly and comfortable interior
Provide an "interior area" for passengers that is comfortable and roomy
Provide a "pro work area" for the driver that boosts their professional morale
Provide a "welcome area" that comfortably welcomes passengers
| *a | Area Near Instrument Panel | *b | Sliding Door Opening |
| *c | Passenger Area | - | - |
Comfortable and Open Mobile Space (DX, GL Grade)
While taking into consideration dirt-disguising functionality, the colors, patterns and shapes from the ceiling to the trim, seat and floor areas are coordinated to create an open and mobile space.
Bright Atmosphere Design Elements (DX, GL Grade)
The starting edge of the dark color is lowered to increase the area covered by the light beige color of the trim upper, brightening the interior (interior color: Fromage).
Open Atmosphere Design Elements (DX, GL Grade)
The areas around the windows are chamfered, expressing a sense of roominess and modernity.
Comfortable Passenger Area Design Elements (GL Grade)
Depending on the model, utility elements are provided within reach of each seat while supporting the charging of various types of IT devices.
| *1 | Reading Light | *2 | Pocket and USB Jack |
Scratch-and-dirt-disguising Design Elements (DX, GL Grade)
Depending on the model, a dark color is used near the feet of passengers in consideration of dirt-disguising performance. Also, scratch-disguising relief shapes are provided for the deck side trim, etc.
| *a | Dark Floor Color | *b | Lower Trim Relief Shapes |
| *c | Floor Carpet Print Pattern | *d | Entrance/Exit Step Relief Shapes |
Passenger Seats with A Sense of Unity (DX, GL Grade)
For models with the "Fromage" interior color, the same light beige as the ceiling and trim is used for the center parts of the seats, expressing horizontal spaciousness.
High-quality Design Elements / Dirt-disguising Design Elements (DX, GL Grade)
A combination of artificial leather and fabric is used for the seat to express a difference in texture, and stitching is also provided to express a high degree of craftsmanship.
A dark color is used for parts of the seats frequently contacted by passengers in consideration of dirt-disguising performance.
| *1 | Rear Seat | *2 | Front Seat |
| *a | Fabric | *b | Artificial Leather |
| *c | Stitch | - | - |
Comfortable Passenger Area Design Elements (Utility) (GL Grade)
Utility elements are provided within reach of each seat.*
*: Availability differs depending on the grade.
| *1 | Assist Grip Sub-assembly | *2 | Bottle Holder |
| *3 | Net Pocket | *4 | Rear Seat Side Pocket |
| *a | Drink | *b | Magazines, etc. |
Design Elements Inviting Passengers to Ride (DX, GL Grade)
The linear shape of the sliding door opening (A in illustration) expresses an opening that is larger than its dimensions. Depending on the model, an entering/exiting step illumination (step light/sliding door scuff illumination) is used and a bright light is used for the entering/exiting grip (pillar assist grip assembly) (B in illustration) in consideration of visibility, creating areas that make passengers "reflexively want to enter the vehicle".
| *1 | Slide Door Scuff Illumination Light (or Slide Door Step Light) | *2 | Pillar Assist Grip Assembly |
Easy Cabin Movement Design Elements (DX, GL Grade)
Design elements, such as the shape of the seat shoulder grip (rear seat shoulder belt hole cover), which is shaped in consideration of grip feeling, the interior color usage and color scheme, and patterns, are used along the line of movement to the rear passenger area in consideration of smooth passenger movement.
| *1 | Rear Seat Shoulder Belt Hole Cover | - | - |
| *a | Floor Pattern | - | - |
Design Theme (VX Grade)
GRAND-LUXURY
A "refined" and "gorgeous" space is provided with the goal of creating a premium and modern luxury courtesy vehicle that is also suitable for personal use by the affluent.
Refined and Gorgeous Mobile Space (VX Grade)
The high contrast between the bright ceiling area and black interior panels, the gorgeous ornamentation panel, and the captain seats* with armrests all work together to create a mobile space suitable for a luxury courtesy vehicle.
*: Models with captain seat
Designed to Create a Gorgeous Space (VX Grade)
The woodgrain pattern enveloping the passengers and the metal-like ornamentation panel provide a gorgeous appearance that is immediately noticeable.
Illumination is provided on the sliding door trim and deck side trim at the waist level of passengers to express a gorgeous appearance.
Seats that Emphasize a Sense of Refinement and Style (VX Grade)i.
A unique design, where the seat shoulders protrude to make the seatback look larger and more stylish, is used to provide a sense of specialness. Also, three rows of seats are provided for the premium package to create an even more comfortable passenger space.
Three Front Seats that Emphasize a Sense of Refinement and Comfort (VX Grade)
Premium package models include three front seats (a driver seat and a two-person front passenger seat). The seatback board tray on the back of the center seat features a woodgrain design in order to express a comfortable and refined cockpit space.
| *1 | Seatback Tray (Wood Grain) | *2 | Cup Holder (Satin Plated Ring) |
Designed to Create a Comfortable Passenger Space (VX Grade)
Utility elements are provided within reach of each seat to support the charging of various types of IT devices.
| *1 | Reading Light | *2 | Side Trim Tray and Bottle Holder |
| *3 | USB Jack | *4 | Seat Side Tray and Bottle Holder |
| *5 | Front Seatback Pocket | - | - |
Inviting Passengers into a Refined Atmosphere (VX Grade)
The stainless steel plate and comfortable grip of the entering/exiting steps and the illumination lights help create an area that makes passengers "reflexively want to enter the vehicle".
| *1 | Entering/Exiting Grips with Satin Plated Rings | *2 | Stainless Steel Plate |
| *3 | Illumination Light | - | - |
Open and Easy-to-use Cockpit
The instrument panel is designed to fuse the driver and passenger areas.
| *a | Driver Area | *b | Passenger Area |
Openness Design Elements
The belt line is lowered and the usage of the bright interior color is expanded (top illustration), achieving a sloped shape with a sense of roominess for the passenger side (bottom illustration).
Ease-of-use Design Elements
Functions are concentrated near the driver seat in consideration of how far the driver reaches when performing switch operations.
MAIN FEATURES
Distinctive External Appearance / Tactile Sensation
On the DX grade and GL grade, a two-tone color scheme is used for the interior.
| *a | Light Gray | *b | Black |
| *a | Fromage | *b | Orchid Brown |
In contrast to the DX grade and GL grade, the VX Grade features an entirely black instrument panel, plated air conditioning vents in areas easily visible from the driver seat, and woodgrain pattern ornamentation in front of the front passenger seat, expressing a gorgeous appearance.
Upholstery and genuine stitching are used on the surface of the meter hood, while upholstery and artificial stitching are used on the surfaces of the driver seat and front passenger seat side ornamentation. Together with the soft padded material and artificial stitching used in the upper instrument panel, a unified appearance is provided throughout the entire instrument panel.
| No. | Parts | Materials |
|---|---|---|
| *1 | Instrument Panel Register Assembly No. 2 | Plating |
| *2 | Instrument Panel Register Assembly No. 4 | Plating |
| *3 | Instrument Panel Register Assembly No. 3 | Plating |
| *4 | Instrument Panel Register Assembly No. 1 | Plating |
| *5 | Glove Compartment Door Assembly | Satin Plating & Wood Grain (Premium Package) |
| Black Metallic (Except Premium Package) | ||
| *6 | Console Compartment Box Assembly | Satin Plating & Wood Grain (Premium Package) |
| *7 | Instrument Panel Garnish Sub-assembly No. 1 | Artificial Stitching |
| *8 | Instrument Cluster Finish Panel Center Lower | Artificial Stitching |
| *9 | Meter Hood Sub-assembly | Upholstered & Stitched |
| *10 | Meter Hood Cluster Sub-Assembly RH | Upholstered & Artificial Stitching |
| *11 | Meter Hood Cluster Sub-assembly LH | Upholstered & Artificial Stitching |
| *12 | Instrument Panel Sub-assembly | Soft Pad |
Item List
Standard Roof Models / Van / DX Grade
Wood-based panels are used in the interior to ensure space and prioritize cleanliness. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat.
| No. | Parts | Materials |
|---|---|---|
| *1 | Front Door Trim Board Sub-assembly RH | Resin |
| *2 | Center Pillar Garnish Lower RH | Resin |
| *3 | Rear Door Trim Board Sub-assembly RH | Wood Material |
| *4 | Quarter Trim Set | Wood Material |
| *5 | Back Door Trim Board | Wood Material |
| *6 | Roof Headlining Assembly Rear | Non-woven Fabric |
| *7 | Center Pillar Garnish RH | Resin |
| *8 | Roof Inner Rack Board Front | Resin |
| *9 | RH Visor Assembly | Resin & Skin (PVC) |
| *10 | Map Light Sub-assembly | Resin |
| *11 | Pillar Assist Grip Assembly | Resin (TPO) |
| *12 | Front Pillar Garnish RH | Resin |
| *13 | Front Armrest Base Panel Upper RH | Resin |
Standard Roof Models / Van / DX Grade (Half Panel Van)
Wood-based panels are used in the interior to ensure space and prioritize cleanliness. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat. An assist grip assembly is also provided for the first row of rear seats in consideration of passenger posture support.
| No. | Parts | Materials |
|---|---|---|
| *1 | Front Door Trim Board Sub-assembly RH | Resin |
| *2 | Center Pillar Garnish Lower RH | Resin |
| *3 | Rear Door Trim Board Sub-assembly RH | Wood Material |
| *4 | Quarter Trim Set | Non-woven Fabric |
| *5 | Roof Headlining Assembly Rear | Non-woven Fabric |
| *6 | Center Pillar Garnish RH | Resin |
| *7 | Roof Inner Rack Board Front | Resin |
| *8 | RH Visor Assembly | Resin & Skin (PVC) |
| *9 | Map Light Sub-assembly | Resin |
| *10 | Pillar Assist Grip Assembly | Resin (TPO) |
| *11 | Front Pillar Garnish RH | Resin |
| *12 | Front Armrest Base Panel Upper RH | Resin |
Standard Roof Models / Commuter / DX Grade
Non-woven fabric is provided for the side surfaces of the interior in consideration of tactile sensation. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat. The parts of the roof headlining that pass over passengers are designed to ensure sufficient head clearance for passengers.
| No. | Parts | Materials |
|---|---|---|
| *1 | Front Door Trim Board Sub-assembly RH | Resin |
| *2 | Center Pillar Garnish Lower RH | Resin |
| *3 | Pillar Assist Grip Assembly (Slide Door) | Resin (TPO) |
| *4 | Rear Door Trim Board Sub-assembly RH | Wood Material |
| *5 | Quarter Trim Set | Non-woven Fabric |
| *6 | Roof Headlining Assembly Rear | Non-woven Fabric |
| *7 | Center Pillar Garnish RH | Resin |
| *8 | Assist Grip Assembly | Resin |
| *9 | RH Visor Assembly | Resin & Skin (PVC) |
| *10 | Map Light Sub-assembly | Resin |
| *11 | Pillar Assist Grip Assembly (Front Door) | Resin (TPO) |
| *12 | Front Pillar Garnish RH | Resin |
| *13 | Front Armrest Base Panel Upper RH | Resin |
Standard Roof Models / Commuter / GL Grade
Window frames, which are designed based on high-speed rail trains, and ornamentation molding are used, providing a high-quality and relaxing atmosphere.
| No. | Parts | Materials | |
|---|---|---|---|
| *1 | Front Door Trim Board Sub-assembly RH | Upper Board | Resin |
| *2 | Lower Board | Resin | |
| *3 | Resin | ||
| *4 | Pull Handle | Resin | |
| *5 | Upper Garnish | Resin | |
| *6 | Roof Headlining Assembly Rear | Upper Board | Resin |
| *7 | Lower Board | Resin | |
| *8 | Resin | ||
| *9 | Decorative Molding | Film (Silver) | |
| *10 | Slide Door Trim Cover UPR LH | Garnish | Resin |
| *11 | Quarter Trim Panel Assembly RH | Upper Board | Resin |
| *12 | Lower Board | Resin | |
| *13 | Decorative Molding | Film (Silver) | |
| *14 | Resin | ||
| *15 | Front Armrest Base Panel Upper RH | Paint (Black) | |
| *16 | Front Pillar Garnish RH | Resin | |
| *17 | Roof Headlining Assembly Rear | Non-woven Fabric | |
| *18 | Roof No. 1 Headlining | Non-woven Fabric | |
| *19 | RH Visor Assembly | Resin & Skin (PVC) | |
| *20 | Map Light Sub-assembly | Resin | |
| *21 | Pillar Assist Grip Assembly (Front Door) | Resin | |
| *22 | Pillar Assist Grip Assembly (Slide Door) | Resin | |
| *23 | Assist Grip Assembly | Resin | |
High Roof Models / Van / DX Grade
Wood-based panels are used in the interior to ensure space and prioritize cleanliness. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat. An overhead tray (roof inner rack board front) is provided to ensure storage performance while integrating an assist grip. As a result, the number of separate parts is reduced and a sleek appearance is achieved.
| No. | Parts | Materials |
|---|---|---|
| *1 | Front Door Trim Board Sub-assembly RH | Resin |
| *2 | Center Pillar Garnish Lower RH | Resin |
| *3 | Rear Door Trim Board Sub-assembly RH | Wood Material |
| *4 | Quarter Trim Set | Wood Material |
| *5 | Back Door Trim Board | Wood Material |
| *6 | Roof Headlining Assembly Rear | Non-woven Fabric |
| *7 | Center Pillar Garnish RH | Resin |
| *8 | Roof Inner Rack Board Front | Resin |
| *9 | RH Visor Assembly | Resin & Skin (PVC) |
| *10 | Map Light Sub-assembly | Resin |
| *11 | Pillar Assist Grip Assembly | Resin (TPO) |
| *12 | Front Pillar Garnish RH | Resin |
| *13 | Front Armrest Base Panel Upper RH | Resin |
| *14 | Roof No. 1 Headlining | Non-woven Fabric |
High Roof Models / Commuter / DX Grade
Non-woven fabric is provided for the side surfaces of the interior in consideration of tactile sensation. Particular attention has been paid to rigidity, achieving the strength of a commercial vehicle in the area around the driver seat. An overhead tray (roof inner rack board front) is provided to ensure storage performance while integrating an assist grip. As a result, the number of separate parts is reduced and a sleek appearance is achieved.
| No. | Parts | Materials |
|---|---|---|
| *1 | Front Door Trim Board Sub-assembly RH | Resin |
| *2 | Center Pillar Garnish Lower RH | Resin |
| *3 | Rear Door Trim Board Sub-assembly RH | Non-woven Fabric |
| *4 | Quarter Trim Set | Non-woven Fabric |
| *5 | Roof Headlining Assembly Rear | Non-woven Fabric |
| *6 | Center Pillar Garnish RH | Resin |
| *7 | Roof Inner Rack Board Front | Resin |
| *8 | RH Visor Assembly | Resin & Skin (PVC) |
| *9 | Map Light Sub-assembly | Resin |
| *10 | Pillar Assist Grip Assembly | Resin |
| *11 | Front Pillar Garnish RH | Resin |
| *12 | Front Armrest Base Panel Upper RH | Resin |
High Roof Models / Commuter / GL Grade
Window frames, which are designed based on high-speed rail trains, and ornamentation molding are used, providing a high-quality and relaxing atmosphere.
| No. | Parts | Materials | |
|---|---|---|---|
| *1 | Front Door Trim Board Sub-assembly RH | Upper Board | Resin |
| *2 | Lower Board | Resin | |
| *3 | Resin | ||
| *4 | Pull Handle | Resin | |
| *5 | Upper Garnish | Resin | |
| *6 | Roof Headlining Assembly Rear | Upper Board | Resin |
| *7 | Lower Board | Resin | |
| *8 | Resin | ||
| *9 | Decorative Molding | Film (Silver) | |
| *10 | Slide Door Trim Cover UPR LH | Garnish | Resin |
| *11 | Quarter Trim Panel Assembly RH | Upper Board | Resin |
| *12 | Lower Board | Resin | |
| *13 | Decorative Molding | Film (Silver) | |
| *14 | Resin | ||
| *15 | Front Armrest Base Panel Upper RH | Paint (Black) | |
| *16 | Front Pillar Garnish RH | Resin | |
| *17 | Room Light Assembly No. 1 | Resin | |
| *18 | Pillar Assist Grip Assembly (Front Door) | Resin | |
| *19 | Pillar Assist Grip Assembly (Slide Door) | Resin | |
| *20 | Pillar Assist Grip Assembly (Quarter Pillar Garnish) | Resin | |
| *21 | Roof Inner Rack Board Front | Resin | |
| *22 | Roof No. 1 Headlining | Non-woven Fabric | |
| *23 | Roof Headlining Assembly Rear | Non-woven Fabric | |
| *24 | RH Visor Assembly | Resin & Skin (PVC) | |
| *25 | Map Light Sub-assembly | Resin | |
| *26 | Back Door Trim Board | Polyethylene Terephthalate (PET), Polypropylene (PP) | |
VX Grade
Large ornamentation around the rear seat is used together with illumination and sun shades to create a luxurious appearance and express a space suitable for transporting VIPs. Reading lights with adjustable angles are used to provide light to the long sliding seats when adjusted to any position.
| No. | Parts | Materials | ||
|---|---|---|---|---|
| Standard | Premium Package | |||
| *1 | Front Door Trim Board Sub-assembly RH | Upper Board | Resin | Resin |
| *2 | Lower Board | Resin | Resin | |
| *3 | Resin | Resin | ||
| *4 | Pull Handle | Resin | Resin | |
| *5 | Ornament | Upholstery (Soft Leather) | Upholstery (Soft Leather) | |
| *6 | Armrest | Upholstery (Soft Leather) | Upholstery (Soft Leather) | |
| *7 | Upper Garnish | Resin | Resin | |
| *8 | Slide Door Trim Board Assembly RH | Shade | - | Resin |
| *9 | Board | Resin | Resin | |
| *10 | Resin | Resin | ||
| *11 | Decorative Ornament | Paint (Black) | Hydraulic Transfer & Plated | |
| *12 | Side Illumination | Resin (Acrylic) | Resin (Acrylic) | |
| *13 | Garnish | Resin | Resin | |
| *14 | Quarter Trim Panel Assembly RH | Shade | - | Resin |
| *15 | Board | Resin | Resin | |
| *16 | Decorative Ornament | Paint (Black) | Hydraulic Transfer & Plated | |
| *17 | Side Illumination | Resin (Acrylic) | Resin (Acrylic) | |
| *18 | Tray & Bottle Holder | Resin | Resin (Acrylic) | |
| *19 | Front Armrest Base Panel Upper RH | Paint (Black) | Film & Silver Paint | |
| *20 | Front Pillar Garnish RH | Resin | Resin | |
| *21 | Spot Light Assembly | Silver Paint | Silver Paint | |
| *22 | Roof No. 1 Headlining | Non-woven Fabric | Non-woven Fabric | |
| *23 | Roof Headlining Assembly Rear | Non-woven Fabric | Non-woven Fabric | |
| *24 | Front Floor Mat Assembly | Upholstery (Diroanipan) | Upholstery (Diroanipan) | |
| *25 | Rear Floor Carpet Assembly | Upholstery (Diroanipan) | Upholstery (Diroanipan) | |
| *26 | RH Visor Assembly | Resin & Raised Knit (Bonheur) | Resin & Raised Knit (Bonheur) | |
| *27 | Pillar Assist Grip Assembly (Front Door) | Resin | Resin | |
| *28 | Pillar Assist Grip Assembly (Slide Door) | Resin | Resin | |
| *29 | Assist Grip Assembly | Resin | Resin | |
Instrument Panel
The following types of instrument panels are provided depending on the model.
On the DX grade or GL grade, the center of the instrument panel is specially designed in consideration of the center passenger's legs and feet for models with a 3-person front seat.
| *a | Specially-designed Instrument Panel Center | *b | Center Passenger |
Steering
A 3-spoke steering wheel is used.
Woodgrain ornamentation is positioned at the top of the steering wheel for the VX grade premium package to express a sense of refinement.
| *a | Woodgrain Ornamentation | - | - |
Shift Lever Knob Sub-assembly
The following types of ornamentation are provided for the shift knob depending on the model.
| No. | Parts | DX Grade | GL Grade |
|---|---|---|---|
| *a | Top | Black (PVC) | Silver Paint (ABS) |
| *b | Panel | Black (PVC) | Satin Plating |
| *c | Side | Black (PVC) | Orchid Brown (PVC) |
| No. | Parts | DX Grade | GL Grade | VX Grade |
|---|---|---|---|---|
| *a | Top | Black (PVC) | Orchid Brown (PVC) | Black (Leather) |
| *b | Panel | Black (PVC) | Satin Plating | Satin Plating |
| *c | Side | Black (ABS) | Black (ABS) | Black (PVC) |
| *d | Shift Lever Knob Cover No. 1 | Black (ABS) | Satin Plating | Satin Plating |
Door Area
A pillar assist grip assembly is used for the front pillar garnish assembly, achieving superior accessibility from the front door.
| *1 | Pillar Assist Grip Assembly | *2 | Front Pillar Garnish RH |
Depending on the model, a pillar assist grip assembly is used for the center pillar garnish lower at the front of the sliding door opening, achieving superior accessibility from the sliding door. Depending on the model, ornamentation of the same color as the interior is provided for the DX grade and GL grade, while plated rings are provided for the VX grade.
| *A | DX Grade (Commuter Models), GL Grade | *B | VX Grade |
| *1 | Pillar Assist Grip Assembly | *2 | Center Pillar Garnish Lower RH |
| *a | Interior Color Ornamentation | *b | Plated Rings |
Depending on the model, a pillar assist grip assembly is used, achieving superior accessibility from the sliding door.
| *1 | Pillar Assist Grip Assembly | *2 | Quarter Pillar Garnish RH |
Depending on the model, a hand grip frame sub-assembly No. 1 is used, achieving superior accessibility from the sliding door.
| *1 | Hand Grip Frame Sub-assembly No. 1 | - | - |
An easy-to-grip cross sectional shape is used on the pull handle portion of the front door trim board sub-assembly to achieve a soft grip feeling.
| *1 | Front Door Trim Board Sub-assembly RH | - | - |
| *a | A - A Cross Section | *b | Pull Handle |
For the VX grade, a soft layer is provided on the front door trim ornament sub-assembly and front door trim armrest assembly, which make contact with users' elbows.
| *1 | Front Door Trim Ornament Sub-assembly | *2 | Front Door Trim Armrest Assembly |
Black metallic ornamentation is provided on the front armrest base panel upper for models without the VX grade premium package.
| *1 | Front Armrest Base Panel Upper RH | - | - |
Woodgrain pattern ornamentation is provided on the front armrest base panel upper for the VX grade premium package.
| *1 | Front Armrest Base Panel Upper RH | - | - |
Rear Trim Area (GL Grade)
Depending on the model, ornaments covered with a film that looks like satin silver plating are used as interior accents to express a unified sense of luxury from the front to the rear. Also, the ends of the ornaments are positioned so that they enter the ornament trim (*c in illustration), achieving a design that makes them appear to naturally disappear into the trim.
| *1 | Slide Door Trim Board Assembly RH | *2 | Ornament |
| *3 | Quarter Trim Board Assembly RR | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | C - C Cross Section | - | - |
On the standard roof model (DX grade, GL grade), the body pillar trim and window frame are designed to resemble those of an airplane or high-speed rail train. Also, the amount of interior space occupied by the roof headlining is decreased, ensuring sufficient interior space.
| *a | A - A Cross Section | *b | Extend Area |
For the VX grade, black metallic ornamentation is provided for the slide door trim ornament and quarter trim ornament for models without the VX grade premium package.
| *1 | Slide Door Trim Ornament | *2 | Quarter Trim Ornament |
For the VX grade, woodgrain pattern ornamentation is provided for the slide door trim ornament and quarter trim ornament for the VX grade premium package.
| *1 | Slide Door Trim Ornament | *2 | Quarter Trim Ornament |
Illumination
For the DX grade, bulbs are used for all interior illumination (except for some models). For the GL grade and VX grade, LEDs are used for all interior illumination to express a sense of luxury.
| *1 | Map Light Sub-assembly | *2 | No. 1 Room Light Assembly |
| *3 | Slide Door Step Light (Half Panel Van Only) | - | - |
| *1 | Map Light Sub-assembly | *2 | No. 1 Room Light Assembly |
| *3 | Slide Door Step Light | - | - |
| *1 | Map Light Sub-assembly | *2 | No. 1 Room Light Assembly |
| *3 | Slide Door Scuff Illumination Light | - | - |
| *1 | Map Light Sub-assembly | *2 | No. 1 Room Light Assembly |
| *1 | Map Light Sub-assembly | *2 | No. 1 Room Light Assembly |
| *3 | Slide Door Step Light | - | - |
| *1 | Map Light Sub-assembly | *2 | No. 1 Room Light Assembly |
| *3 | Spot Light Assembly | *4 | Slide Door Scuff Illumination Light |
| *1 | Map Light Sub-assembly | *2 | No. 1 Room Light Assembly |
| *3 | Slide Door Scuff Illumination Light | *4 | Side Illumination Light |
| *5 | Slide Door Step Light | *6 | Spot Light Assembly |
| *7 | Vanity Light Assembly | - | - |
| *1 | Rear Door Scuff Plate RH | *2 | Slide Door Step Light (No. 2 Room Light Assembly) |
| *1 | Rear Door Scuff Plate RH | *2 | Slide Door Scuff Illumination Light (No. 1 Interior Illumination Light Assembly) |
Side Illumination Light
Side illumination lights are provided for the VX grade. Indirect lighting is used beneath the belt line to express that the vehicle has a soft and calm interior. Illumination can be adjusted to one of three levels, allowing customers to select which type of interior atmosphere to express. One color (clear blue) is provided for models without the premium package, while the premium package makes it possible to switch between three colors (amber, clear blue, and white).
| *1 | Side Illumination Light | - | - |
Slide Door Step Light (Attached to Door)
A step light assembly is provided on the sliding door for the VX grade. The light automatically turns on when the door is opened, illuminating the steps and making it easier to enter or exit the vehicle at night or in the dark.
| *1 | Slide Door Step Light | *2 | Slide Door Scuff Illumination Light |
| *a | Illumination by Slide Door Step Light | *b | Illumination by Slide Door Scuff Illumination Light |
Reading Light (High Roof Models / GL Grade)
Nighttime illumination is provided for the symbol mark of the switch knob, achieving superior visibility at night and in dark environments. A high intensity LED is used as a light source.
| *1 | Spot Light Assembly | *2 | Clear Lens (Spot Light Lens) |
| *3 | Spot Light Switch (with Nighttime Illumination) | - | - |
Reading Light (VX Grade)
A reading light (spot light assembly) with a dimmer function is provided for the VX grade.
The brightness can be adjusted to one of three levels.
A high intensity LED is used as a light source. Sufficient brightness is ensured so that passengers can comfortably read books even in low-light environments during the day.
The illumination direction can be adjusted to the front/rear and left/right by manually operating the optical axis portion, allowing it to be used even after moving the seat position.
Silver ornamentation is placed on the optical axis portion of the reading light to express a sense of luxury.
Nighttime illumination is provided for the symbol mark of the switch knob, achieving superior visibility at night and in dark environments.
| *1 | Spot Light Assembly | *2 | Clear Lens (Spot Light Lens) |
| *3 | Spot Light Switch (with Nighttime Illumination) | - | - |
| *a | Manually Adjustable Illumination Position | - | - |
Back Door Inside Handle Light
Depending on the model, a back door inside handle light is provided for commuter models of high roof models. As a result, the back door can be more easily used at night or in other situations when the surrounding area is dark.
| *1 | Back Door Inside Handle Light | - | - |
Vanity Light
A vanity light assembly is provided for the VX grade. The light turns on when the vanity mirror is opened, making the vanity mirror more convenient to use.
| *1 | Vanity Light Assembly | *2 | Vanity Mirror |
Storage
Overhead Tray
On high roof models, an overhead tray (roof inner rack board front), which can accommodate A4-sized documents and long objects, is provided above the front seats.
| *1 | Roof Inner Rack Board Front | - | - |
| *a | A4 File, A4 Map, Binder, etc. (One side can store up to 2 kg) | *b | Long Object |
Accessories Case (Overhead Console)
A small storage space for the overhead console (map light sub-assembly) that can store small objects such as cards and keys is provided at the front edge of the roof.
| *1 | Map Light Sub-assembly | - | - |
| *a | Accessories Case | - | - |
Ticket Holder (Driver Side Visor Assembly)
A convenient ticket holder that can store tickets, etc., is provided for the driver side visor assembly.
| *1 | Visor Assembly | - | - |
| *a | Ticket Holder | - | - |
Glove Box
The open lever (glove compartment door lock sub-assembly) of the instrument panel assembly lower No. 2 is designed to open to the side, ensuring driver operability.
The instrument panel assembly lower No. 2 is designed with a low bottom, making it possible to store items such as notebook computers*.
*: Certain items may not be able to be stored depending on its size and shape.
| *1 | Instrument Panel Assembly Lower No. 2 | *2 | Glove Compartment Door Lock Sub-assembly |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | Owner's Manual | *d | Notebook Computer |
| *e | Pull Lever to Unlock | *f | Open |
Glove Box Card Holder
A card holder is provided on the backside of the glove box door (instrument panel assembly lower No. 2).
| *1 | Instrument Panel Assembly Lower No. 2 | - | - |
| *a | Card Holder | - | - |
Driver Seat and Passenger Seat Cup Holders
The driver seat and passenger seat cup holders are designed with square bottoms so that they can also be used to easily store objects other than cups.
| *1 | Driver Seat Cup Holder (Instrument Panel Garnish Sub-assembly No. 1) | *2 | Passenger Seat Cup Holder (Instrument Panel Garnish Sub-assembly No. 2) |
| *a | A View | *b | B View |
| *c | Square Bottom | - | - |
Center Seat Cup Holder
The center seat cup holder is designed so that it can also be used as a small storage space.
| *1 | Accessory Socket | *2 | Center Seat Cup Holder (Instrument Panel Cup Holder Assembly) |
Instrument Panel Center Small Storage Space
A small storage space is provided in the center of the instrument panel within reach of the driver in consideration of usability.
| *1 | Instrument Panel Center Small Storage Space (Spare Switch Hole Cover) | - | - |
| *1 | Instrument Panel Center Small Storage Space (Instrument Panel Box Sub-assembly Center) | - | - |
| *a | Closed | *b | Open |
| *c | Push | *d | Open Automatically |
| *A | Models without Rear Seat Belt Reminder (Indicator Assembly) | *B | Models with Rear Seat Belt Reminder (Indicator Assembly) |
| *1 | Instrument Panel Center Small Storage Space (Instrument Panel Box Sub-assembly Center) | - | - |
| *a | Closed | *b | Open |
| *c | Push | *d | Open Automatically |
Card Holder
Depending on the model, a card holder is provided in the center of the instrument panel within reach of the driver in consideration of usability.
| *1 | Card Holder (Instrument Panel Under Cover No. 3) | - | - |
Console Box Assembly (Models with Console Tray )
A detachable divider (console box plate) is provided for the console box assembly. The divider (console box plate) can be removed or installed depending on the stored object, increasing the functionality of the tray.
A small tray is provided at the rear of the console box assembly. Small items that may spread throughout the main tray can be stored in the small tray.
| *1 | Console Box Assembly | *2 | Console Box Plate |
| *a | Pull Up and Out | *b | Main Tray |
| *c | Rear Tray | - | - |
Console Compartment Box Assembly (Models with Console Box)
A console compartment box assembly with a rotating door is provided. A tray, upon which objects such as tablets or binders can be placed, is provided on top of the door in consideration of usability.
Opening operation: Pull the lever. Once the door automatically pops up, manually open the console compartment box assembly.
| *1 | Console Compartment Box Assembly | *2 | Lever |
| *a | Closed | *b | Open |
| *c | Pop-up (Automatic Open) | *d | Manual Open |
| *e | Tablet Computer | *f | 600 mL Plastic Bottle Storage Example |
A divider (instrument panel cup holder support No. 1) is provided for the small storage space at the rear of the console box. The divider can be removed and repositioned, making it possible to store more types of objects. The divider is repositioned by aligning one of the grooves on the divider with the protrusion in the console box rear small storage space. Also, by removing the divider, devices such as tablets can be propped up.
| *1 | Console Compartment Box Assembly | *2 | Instrument Panel Cup Holder Support No. 1 |
| *a | Pull Up and Out | *b | Groove |
| *c | Protrusion | *d | Right Position |
| *e | Center Position | *f | Left Position |
| *g | Tablet Computer | *h | Console Box Rear Small Storage Space |
A convenient removable tray (console box pocket), which can store small objects such as smartphones, is provided in the console compartment box assembly. The tray can be aligned with the protrusions inside the box and slid along the rail to change its position.
| *1 | Console Compartment Box Assembly | *2 | Console Box Pocket |
| *a | Rail | *b | Protrusion |
A binder rack (trash box retainer support No. 1 and console box hole cover) is provided in front of the console compartment box assembly. Objects such as binders and tablets can be inserted and stored.
| *1 | Trash Box Retainer Support No. 1 | *2 | Console Box Hole Cover |
| *3 | Console Compartment Box Assembly | - | - |
| *a | Binder, etc. | - | - |
Bottle Holder and Pocket (Front Door)
A space for storing A4-sized documents is provided in the door pocket in consideration of usability.*
The bottle holder can store large plastic bottles in consideration of usability.*
*: Certain items may not be able to be stored depending on its size and shape.
| *1 | Front Door Trim Board Sub-assembly RH | - | - |
| *a | A- A Cross Section | *b | B- B Cross Section |
| *c | Bottle Holder | *d | Door Pocket |
| *e | Plastic Bottle, etc. | *f | A4-sized File, etc. |
Bottle Holder (Rear Slide Door) (GL Grade, VX Grade)
The bottle holder can store plastic bottles in consideration of usability.*
*: Certain items may not be able to be stored depending on its size and shape.
| *1 | Slide Door Trim Board Assembly RH | - | - |
| *a | A- A Cross Section | *b | Bottle Holder |
| *c | Plastic Bottle, etc. | - | - |
Bottle Holder and Pocket (Side and Quarter Trim Board) (GL Grade)
A bottle holder and pocket, which can store plastic bottles and various types of items, are provided for the quarter trim board and side quarter trim board in consideration of usability.
*: Certain items may not be able to be stored depending on its size and shape.
| *1 | Quarter Trim Panel Assembly RH | *2 | Side Trim Board Assembly |
| *3 | Quarter Trim Board Assembly RR | - | - |
| *a | Bottle Holder and Pocket | *b | Plastic Bottle |
| *c | File, Tablet Computer etc. | - | - |
Bottle Holder, Tray and Pocket (VX Grade)
A bottle holder, tray and pocket, which can store plastic bottles and various types of items, are provided for the quarter trim panel assembly in consideration of usability.
*: Certain items may not be able to be stored depending on its size and shape.
| *A | Models with Rear Automatic Air Conditioning System | *B | Models with Rear Cooler System |
| *1 | Quarter Trim Panel Assembly RH | *2 | Quarter Trim Panel Assembly LH |
| *a | Bottle Holder | *b | Tray |
| *c | Bottle Holder and Pocket | *d | Plastic Bottle |
| *e | File etc. | - | - |
Functional Items / Equipment
Accessory Socket
An accessory socket (power outlet socket assembly No. 1) is positioned in the instrument panel under cover No. 3 in consideration of driver accessibility.
| *1 | Instrument Panel Under Cover No. 3 | *2 | Power Outlet Socket Assembly No. 1 |
An accessory socket is positioned on the side of the center seat cup holder (instrument panel cup holder assembly).
| *1 | Center Seat Cup Holder (Instrument Panel Cup Holder Assembly) | *2 | Accessory Socket |
| *a | Portable Music Player, Smartphone, etc. | - | - |
USB Jack (GL Grade)
A USB jack (USB charger socket) is provided in each bottle holder of the quarter trim board and side quarter trim board, making it possible to charge cellular phones from the rear seat. Also, the USB jack is positioned so that it can be used even while a drink is being stored.
| *1 | Quarter Trim Board Assembly RR LH | *2 | Quarter Side Trim Board Assembly LH |
| *3 | Quarter Trim Board Assembly FR LH | *4 | USB Jack (USB Charger Socket) |
USB Jack (VX Grade)
A USB jack (USB charger socket) is provided in the quarter trim panel assembly. IT devices such as cellular phones, portable music players and tablet computers can be charged by placing them on the tray in consideration of usability.
| *1 | Quarter Trim Panel Assembly RH | *2 | USB Jack (USB Charger Socket) |
Coat Hook (Rear No. 3 Seat)
For VX grade, a one touch storage type coat hook is used to avoid interference when not in use.
| *1 | Coat Hook Sub-assembly | - | - |
| *a | Stored | *b | In Use |
Sun Shade
A sun shade (rear curtain sub-assembly) is used for the sliding door and shade (rear window curtain) is used for the quarter trim, helping to block light for the rear seats.
| *1 | Rear Curtain Sub-assembly | *2 | Rear Window Curtain |
Sound absorbing and Vibration Damping Material
Instrument Panel
Noise absorption material and noise insulation material are positioned in various parts of the instrument panel to prevent engine noise and air conditioning noise from entering the cabin for quietness.*
*: Sound insulation materials differ depending on the model.
| *1 | Instrument Panel Cushion No. 1 | *2 | Instrument Panel Cushion No. 2 |
| *3 | Instrument Panel Under Silencer Pad No. 1 | *4 | Instrument Panel Cushion No. 3 |
Instrument Panel Reinforcement Assembly
A collar and bracket are provided for the instrument panel reinforcement assembly, blocking holes in the dash silencer and helping suppress engine noise penetration.
| *1 | Instrument Panel Reinforcement Assembly | *2 | Collar |
| *3 | Bracket | *4 | Dash Panel Silencer Assembly |
| *a | A - A Cross Section | - | - |
Roof Headlining / Body / Floor Mat
Sound insulation materials are optimally positioned over a wide area that includes the floor board, floor mat, door trim and ceiling, achieving a quiet interior atmosphere.*
*: Sound insulation materials differ depending on the model.
| *1 | Roof No. 1 Headlining | *2 | Roof Headlining Assembly Rear |
| *a | Noise Absorbing Felt (Polyethylene Terephthalate (PET)) | - | - |
| *1 | Front Pillar Garnish RH | *2 | Cowl Side Trim Board RH |
| *3 | Front Door Trim Board Sub-assembly RH | *4 | Front Door Scuff Plate RH |
| *5 | Center Pillar Garnish RH | *6 | Center Pillar Garnish Lower RH |
| *7 | Slide Door Trim Cover Upper RH | *8 | Roof Side Rail Garnish Assembly Front RH |
| *9 | Roof Side Rail Garnish Assembly Rear RH | *10 | Slide Door Window Garnish RH |
| *11 | Quarter Pillar Garnish RH (1) | *12 | Quarter Pillar Garnish RH (2) |
| *13 | Rear Pillar Garnish Upper RH | *14 | Slide Door Trim Board Assembly RH |
| *15 | Rear Door Scuff Plate RH | *16 | Side Trim Board Assembly RH |
| *17 | Quarter Trim Board Assembly RR RH | *18 | Front Pillar Garnish LH |
| *19 | Cowl Side Trim Board LH | *20 | Front Door Trim Board Sub-assembly LH |
| *21 | Front Door Scuff Plate LH | *22 | Roof Side Rail Garnish Assembly Front LH |
| *23 | Roof Side Rail Garnish Assembly Rear LH | *24 | Center Pillar Garnish LH |
| *25 | Quarter Pillar Garnish LH (1) | *26 | Quarter Pillar Garnish LH (2) |
| *27 | Rear Pillar Garnish Upper LH | *28 | Quarter Trim Panel Assembly LH |
| *29 | Side Trim Board Assembly LH | *30 | Quarter Trim Board Assembly RR LH |
| *a | Noise Absorbing Felt | *b | Noise Absorbing Pad |
| *c | Noise Absorbing Sheet | - | - |
| *1 | Rear Floor Mat | *2 | Front Floor Mat Assembly |
| *3 | Rear Floor Board Sub-assembly Upper No. 1 | *4 | Rear Floor Board Sub-assembly Upper No. 2 |
| *5 | Rear Floor Board Sub-assembly Upper No. 4 | *6 | Rear Floor Board Sub-assembly Upper No. 3 |
Safety Features
The end of the instrument panel has a concave design, providing sufficient distance from the windshield glass. In the event of a collision with a pedestrian, a crushable zone from the point of contact with the pedestrian's head, etc. to the end of the instrument panel is provided, helping reduce the extent of the pedestrian's injuries.
An enclosing structure is used to install the instrument panel to the cowl assembly. As a result, when a pedestrian's head, etc., impacts the vehicle, the instrument panel easily detaches from the cowl assembly, helping reduce the extent of the pedestrian's injuries.
| *1 | Instrument Panel | *2 | Windshield Glass |
| *3 | Cowl Assembly | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | Crushable Zone | *d | Enclosing Structure |
| *e | Impact Energy | *f | Drop Off |