FUNCTION
USB Audio System Function
The No. 1 stereo jack adapter assembly is equipped with a USB terminal. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions, is also possible to play MP3, WMA or AAC music files that are stored on a USB device. In addition, "iPod" control software is installed, allowing file selection from playlists and operation using shuffle mode.
Operation through the controls of a USB device or some "iPod" generation cannot be performed while it is connected.
USB Audio System Compatible Devices
USB Device
The following device formats can be used:
| Compatible USB device formats | ·
USB communication format: USB 2.0 FS (12MBPS) ·
File format: FAT16/32 (Windows) ·
Class: Mass storage class |
MP3 and WMA files written in any format other than those listed above may not play correctly, and their names and folder names may not be displayed correctly.
Items related to standards and limitations are as follows:
Maximum directory hierarchy: 8 levels
Maximum number of folders in device: 3000 (including the root folder)
Maximum number of files in device: 9999
Maximum number of files per folder: 255
"iPod"
"iPhone", "iPod", "iPod touch" and "iPod nano" are trademarks of Apple Inc., registered in the U.S. and other countries.
The following "iPhone", "iPod touch" and "iPod nano" devices can be used with this system.
Made for:
"iPhone 7"
"iPhone 7 Plus"
"iPhone SE"
"iPhone 6s"
"iPhone 6s Plus"
"iPhone 6"
"iPhone 6 Plus"
"iPhone 5s"
"iPhone 5c"
"iPhone 5"
"iPhone 4S"
"iPod touch" (6th generation)
"iPod touch" (5th generation)
"iPod nano" (7th generation)
Depending on differences between models or software versions etc., some models might be incompatible with this system.
"iPod video" is not supported.