Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type) › from 2021.07
NM35X0E _56 Audio / Visual / Telematics _078401 AUDIO / VIDEO _0491934 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) CO CONTROL F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  CONTROL  AUDIO CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with Wi-Fi communication function

*2: Models with Digital Audio Broadcast (DAB) tuner

*3: Models with voice recognition system

*4: Models with AUX function

*5: Models with CD player

*6: Models with DVD player

Audio Head Unit (Radio and Display Receiver Assembly)
·

Plays back audio from each audio source, such as radio, CD and Bluetooth audio.*5

·

Plays back audio from each audio source, such as radio, CD/DVD and Bluetooth audio.*6

·

Sends audio signals from each audio source to the speakers.

·

Sends each sound source and hands-free system status to the combination meter assembly.

·

Using the equipped 2.4 GHz frequency band wireless LAN, communicates via Wi-Fi with a wireless LAN access point, a tethering capable mobile phone or Wi-Fi mobile router.*1


Speaker Output the audio sounds.
Roof Antenna Pole Sub-assembly Receives radio broadcasting signals (AM/FM).
No. 1 Amplifier Antenna Assembly Amplifies radio broadcasting signals (AM/FM) from the radio antenna and sends them to the audio head unit.
Windshield Glass
·

DAB Antenna*2


Receives radio broadcasting signals (DAB).
Digital Audio Broadcasting Antenna Assembly*2 Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly.
Navigation Antenna Assembly
·

GPS Antenna


Receives signals from GPS satellites and transmits these signals to the audio head unit.
Steering Pad Switch Assembly Sends operation signals from switches such as the volume switch, mode switch, seek switch and voice switch, to the audio head unit.
Map Light Assembly
·

Telephone Microphone Assembly


·

Detects voice during hands-free conversations and voice commands*3.

·

Is installed in the roof headlining and converts sound waves to an electrical signal and sends it to the audio head unit.


No. 1 Stereo Jack Adapter Assembly
·

Sends audio signals to the radio and display receiver assembly when an auxiliary device is connected.*4

·

When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the audio head unit via USB.


Combination Meter Assembly
·

Displays various information and operation signals on the multi-information display sent from the audio head unit via local bus communication.

·

Sends the vehicle speed signal to the audio head unit.




DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.