Use the same procedure for the RHD and LHD vehicles.
The procedure listed below is for the LHD vehicles.
58902C
1.INSTALL CONSOLE BOX MOUNTING BRACKET SUB-ASSEMBLY
|
Bolt A |
|
Bolt B |
Install the console box mounting bracket sub-assembly with the 6 bolts.
| Item | Length |
|---|---|
| Bolt A | 20 mm (0.7874 in.) |
| Bolt B | 54 mm (2.1260 in.) |
58810J
2.INSTALL CONSOLE BOX ASSEMBLY
|
Install in this Direction |
Align the guide, attach the claw and install the console box assembly as shown in the illustration.
w/ Console Box:
Attach the wire harness clamp.
Install the 2 bolts.
58199D
3.INSTALL NO. 2 EXTINGUISHER BRACKET (w/o Console Box, w/ Fire Extinguisher)
Attach the guide to install the No. 2 extinguisher bracket with the 4 bolts.
58839A
4.INSTALL CONSOLE BOX HOLE COVER (w/o Console Box, w/o Fire Extinguisher)
Attach the guide and claw to install the console box hole cover.
58919B
5.INSTALL CONSOLE BOX PLATE (w/o Console Box)
Attach the guide to install the console box plate.
58820A
6.INSTALL CONSOLE COMPARTMENT BOX ASSEMBLY (w/ Console Box)
|
Install in this Direction |
Temporarily install the console compartment box assembly as shown in the illustration.
Connect the connector.
Install the 2 bolts.
Install the console compartment box assembly with the 4 bolts.
58815A
7.INSTALL CONSOLE BOX CARPET (w/ Console Box)
Install the console box carpet.
58825A
8.INSTALL CONSOLE BOX POCKET (w/ Console Box)
Install the console box pocket.
58904B
9.INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY (for Separate Seat Type)
|
Install in this Direction |
Attach the claw to install the parking brake hole cover sub-assembly as shown in the illustration.
58903A
10.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
|
Install in this Direction |
Attach the claw to install the console rear end panel sub-assembly as shown in the illustration.