CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | for LHD | *B | for RHD |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
for LHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Connect the instrument panel junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: w/o Stop and Start System *2: w/ Stop and Start System |
||||
| A-32 (IG) - Body ground | None - Body ground | Ignition power supply | Ignition switch ON | 11 to 14 V*1
10.5 to 16 V*2 |
| Ignition switch off | Below 1 V | |||
| A-31 (BECU) - Body ground | None - Body ground | Battery power supply | Always | 11 to 14 V |
| A-30 (ACC) - Body ground | None - Body ground | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | |||
| A-11 (GND1) - Body ground | None - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Measure the voltage and pulse according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: w/ Ignition Linked Automatic Door Unlock Function *2: w/ Step light, w/o Ignition Linked Automatic Door Unlock Function *3: w/ Immobiliser System, w/o Ignition Linked Automatic Door Unlock Function *4: w/ Slide Door LH *5: w/ Slide Door RH |
||||
| N19-1 (FLCY) - Body ground | R - Body ground | Front door courtesy light switch assembly LH input | Front door LH open | Below 1 V |
| Front door LH closed | 4.7 to 5.3 V | |||
| N19-6 (FRCY) - Body ground | R - Body ground | Front door courtesy light switch assembly RH input | Front door RH open | Below 1 V |
| Front door RH closed | 4.7 to 5.3 V | |||
| 3D-24 (LCTY) - Body ground*4 | LA-R - Body ground | Rear door courtesy light switch assembly LH input | Slide door LH open | Below 1 V |
| Slide door LH closed | 4.7 to 5.3 V | |||
| 3A-31 (RCTY) - Body ground*5 | LA-G - Body ground | Rear door courtesy light switch assembly RH input | Slide door RH open | Below 1 V |
| Slide door RH closed | 4.7 to 5.3 V | |||
| 3D-34 (BCTY) - Body ground | L - Body ground | Back door courtesy light switch input | Back door open | Below 1 V |
| Back door closed | 4.7 to 5.3 V | |||
| 3B-13 (LSFL) - Body ground | B - Body ground | Front door LH unlock detection switch input | Front door LH locked | Pulse generation |
| Front door LH unlocked | Below 1 V | |||
| 3B-12 (LSFR) - Body ground | B - Body ground | Front door RH unlock detection switch input | Front door RH locked | Pulse generation |
| Front door RH unlocked | Below 1 V | |||
| 3B-14 (LSWL) - Body ground*4 | L - Body ground | Slide door LH unlock detection switch input | Slide door LH locked | Pulse generation |
| Slide door LH unlocked | Below 1 V | |||
| N18-20 (LSWR) - Body ground*5 | L - Body ground | Slide door RH unlock detection switch input | Slide door RH locked | Pulse generation |
| Slide door RH unlocked | Below 1 V | |||
| N18-18 (ILEW) - Body ground*1 | B - Body ground | Room light switch input | Room light switch off | 11 to 14 V |
| Room light switch on | Below 1 V | |||
| N19-27 (LSWB) - Body ground | GR - Body ground | Back door unlock detection switch input | Back door locked | Pulse generation |
| Back door unlocked | Below 1 V | |||
| N18-5 (LCYL) - Body ground*2 | P - Body ground | Step light LH input | Step light LH on | Below 1 V |
| Step light LH off | 11 to 14 V | |||
| N18-18 (RCYL) - Body ground*2 | SB - Body ground | Step light RH input | Step light RH on | Below 1 V |
| Step light RH off | 11 to 14 V | |||
| 3B-9 - Body ground | B - Body ground | Interior lights drive output | DOME CUT relay off | 11 to 14 V |
| DOME CUT relay on | Below 1 V | |||
| 3D-19 - Body ground*3 | LA-B - Body ground | Interior lights drive output | DOME CUT relay off | 11 to 14 V |
| DOME CUT relay on | Below 1 V | |||
| 3A-53 - Body ground | LA-G - Body ground | Taillight signal | Ignition switch ON, light control switch TAIL | 11 to 14 V |
| Ignition switch ON, light control switch off | Below 1 V | |||
| 3D-22 - Body ground | LA-G - Body ground | Taillight signal | Ignition switch ON, light control switch TAIL | 11 to 14 V |
| Ignition switch ON, light control switch off | Below 1 V | |||