The rear speed sensor rotor is a component of the rear axle hub and bearing assembly. If the rear speed sensor rotor is malfunctioning, replace the rear axle hub and bearing assembly.
1.REMOVE REAR WHEEL
89545A
2.REMOVE REAR SPEED SENSOR
Remove the bolt and disconnect the connector.
Remove the bolt and separate the rear speed sensor.
Disengage the 3 clamps and separate the rear speed sensor.
Remove the bolt and separate the rear speed sensor from the rear axle hub and bearing assembly LH.
Disengage the 5 clamps and separate the rear speed sensor.
Disengage the 2 clamps and separate the rear speed sensor.
Remove the bolt and rear speed sensor from the rear axle hub and bearing assembly RH.