Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for 1GD-FTV)
RM35X0E _54 Brake _078668 BRAKE SYSTEM (OTHER) _0381545 VACUUM PUMP(for 1GD-FTV) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 1GD-FTV)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE END COVER

a.
C334233

Using a T30 "TORX" socket wrench, remove the 5 screws and end cover.

NOTICE:
·

Hold the pump so that the pump installation surface, fitting parts and oil pipe will not be damaged.

·

As the housing deforms when force is applied, do not clamp the housing with a tool such as a vise.

·

Securely fit the T30 "TORX" socket wrench to the screws.

·

Do not drop the end cover.

·

Do not damage the end cover.




b.
C334234C01
1.729,1.094 2.031,0.635 2.031,0.635 2.24,0.635 false 2.281,0.552 2.5,0.729 0.219,0.177 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the No. 1 O-ring.

NOTICE:

Do not damage the groove.



Hide 2.REMOVE VACUUM PUMP VANE

a.
C334235

Remove the vacuum pump vane together with the 2 vacuum pump vane caps.

NOTICE:
·

When reusing the vacuum pump vane and vacuum pump vane caps, make sure to make a note of the installation position and orientation.

·

Do not drop the vacuum pump vane or vacuum pump vane caps.




b.
C169339C11
0.573,1.552 0.573,1.885 0.573,1.885 1.042,1.885 false 2.698,0.656 2.698,0.292 2.698,0.292 2.208,0.292 false 1.969,1.26 1.969,1.594 1.969,1.594 2.292,1.594 false 1.104,1.823 1.313,1.99 0.208,0.167 10 false *1 2.344,1.521 2.542,1.698 0.198,0.177 10 false *2 1.99,0.208 2.177,0.375 0.188,0.167 10 false *1
*1 Vacuum Pump Vane Cap
*2 Vacuum Pump Vane


Remove the 2 vacuum pump vane caps from the vacuum pump vane.

NOTICE:
·

When reusing the vacuum pump vane and vacuum pump vane caps, make sure to make a note of the installation positions and orientation.

·

Do not drop the vacuum pump vane and vacuum pump vane caps.