Home › Drivetrain › RC60J (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSMISSION SYSTEM (for 7GR-FKS)
RM35X0E _52 Drivetrain _078740 RC60J MANUAL TRANSMISSION / TRANSAXLE _0383349 MANUAL TRANSMISSION SYSTEM(for 7GR-FKS) U

RC60J MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSMISSION SYSTEM(for 7GR-FKS)  TERMINALS OF ECM  


ECM


A356006E05
0.635,0.656 1,0.844 0.365,0.188 1.771,0.646 2.135,0.833 0.365,0.188 2.99,0.646 3.354,0.833 0.365,0.188 3.99,0.646 4.354,0.833 0.365,0.188 5.052,0.646 5.417,0.833 0.365,0.188 6.188,0.646 6.552,0.833 0.365,0.188 0.719,0.667 1.063,0.885 0.344,0.219 10 false E1 1.865,0.656 2.177,0.854 0.313,0.198 10 false E2 3.094,0.656 3.406,0.854 0.313,0.198 10 false E3 4.094,0.656 4.406,0.854 0.313,0.198 10 false E4 5.156,0.656 5.469,0.854 0.313,0.198 10 false N1 6.292,0.656 6.604,0.854 0.313,0.198 10 false A1

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E1-12 (MTMS) - E3-1 (E1) B - W-B iMT switch signal Ignition switch ON and iMT switch pushed Below 1.5 V
Ignition switch ON and iMT switch not pushed 11 to 14 V
E2-21 (CLS) - E1-23 (ETHW) G - BR Clutch pedal stroke sensor assembly signal Ignition switch ON and clutch pedal fully released 0.96 to 1.04 V
·

Ignition switch ON

·

Not depressed → Fully depressed (Clutch pedal should be operated slowly)


Value changes progressively (Only increase)
E2-23 (VC) - E3-1 (E1) W - W-B Power supply for clutch pedal stroke sensor assembly Ignition switch ON 4.5 to 5.5 V
E4-29 (NIMO) - E3-1 (E1) W - W-B Transmission revolution sensor signal Engine idling and clutch pedal fully released Pulse generation
E4-30 (NIMB) - E3-1 (E1) R - W-B Power supply for transmission revolution sensor Ignition switch ON 11 to 14 V
N1-27 (CANH) - E3-1 (E1) G - W-B CAN communication line Ignition switch ON Pulse generation
N1-35 (CANL) - E3-1 (E1) W - W-B CAN communication line Ignition switch ON Pulse generation