Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › UREA INJECTOR
RM35X0E _51 Engine / Hybrid System _079220 1GD-FTV EMISSION CONTROL _0384130 UREA INJECTOR G

1GD-FTV EMISSION CONTROL  UREA INJECTOR  INSPECTION  


PROCEDURE

Hide 23203A 1.INSPECT UREA INJECTOR SET

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 11.6 to 12.4 Ω


If the result is not as specified, replace the urea injector set.