896B1
1.INSTALL UREA PUMP CONTROL ECU
Install the urea pump control ECU to the No. 1 urea pump control bracket with the 3 bolts.
Install the No. 1 urea pump control bracket to the body with the 2 bolts.
|
Move in this Direction |
Connect the connector to the urea pump control ECU, and then move the lever in the direction indicated by the arrow shown in the illustration to lock the connector.
When connecting a connector, make sure that dirt, water and other foreign matter is not stuck between the connector and urea pump control ECU.
89678B
2.INSTALL NO. 2 UREA PUMP CONTROL BRACKET
Attach the 2 clips and install the No. 2 urea pump control bracket to the No. 1 urea pump control bracket.
3.INSTALL FRONT SEAT ASSEMBLY LH
for Separate Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>INSTALLATION
for Fixed Bench Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Fixed Bench Seat Type)>INSTALLATION
for Sliding Bench Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Sliding Bench Seat Type)>INSTALLATION