Home › Drivetrain › CLUTCH › CLUTCH ACCUMULATOR (for 7GR-FKS)
RM35X0E _52 Drivetrain _078837 CLUTCH _0382383 CLUTCH ACCUMULATOR(for 7GR-FKS) A

CLUTCH  CLUTCH ACCUMULATOR(for 7GR-FKS)  REMOVAL  


PROCEDURE

Hide 51406A 1.REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ No. 2 Engine Under Cover Sub-assembly)

Hide 52618 2.REMOVE LOWER FRONT BUMPER ABSORBER

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 51407A 4.REMOVE NO. 3 ENGINE UNDER COVER SUB-ASSEMBLY (w/ No. 3 Engine Under Cover Sub-assembly)

Hide 51773E 5.REMOVE STEP PLATE COVER RH (w/ Cover)

Hide 6.DRAIN CLUTCH FLUID

NOTICE:

Wash off clutch fluid immediately if it comes into contact with a painted surface.


Hide 7.REMOVE CLUTCH ACCUMULATOR HEAT INSULATOR

a.
C410612

Remove the 4 bolts and clutch accumulator heat insulator from the manual transmission assembly.


Hide 31349 8.REMOVE CLUTCH CABLE HEAT INSULATOR

a.
C410613

Remove the 2 bolts and clutch cable heat insulator from the manual transmission assembly.


Hide 31482D 9.REMOVE CLUTCH RELEASE CYLINDER TO ACCUMULATOR TUBE

a.
C410614

Using a union nut wrench, remove the clutch release cylinder to accumulator tube from the clutch release cylinder assembly and clutch accumulator assembly.

HINT:

Use a container to catch the fluid.



Hide 31490 10.REMOVE CLUTCH ACCUMULATOR ASSEMBLY

a.
C410538

Using a union nut wrench, disconnect the clutch release cylinder to flexible hose tube from the clutch accumulator assembly.

HINT:

Use a container to catch the fluid.



b.
C410539

Remove the 3 bolts and clutch accumulator assembly from the manual transmission assembly.