Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR (w/ Urea SCR System)
RM35X0E _51 Engine / Hybrid System _079220 1GD-FTV EMISSION CONTROL _0384165 EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System) A

1GD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
A356209

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.


PROCEDURE

Hide 89425 1.REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust pipe or other high temperature components while the engine is hot.


a.
A440864

Disconnect the connector from the No. 4 exhaust gas temperature sensor.


b.
A440865

Detach the 2 clamps and disconnect the No. 4 exhaust gas temperature sensor from the sensor bracket.


c.
A440866

Using a 14 mm union nut wrench, remove the No. 4 exhaust gas temperature sensor from the center exhaust pipe assembly.