Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR (w/ Urea SCR System)
RM35X0E _51 Engine / Hybrid System _079220 1GD-FTV EMISSION CONTROL _0384165 EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System) G

1GD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System)  INSPECTION  


PROCEDURE

Hide 89425B 1.INSPECT NO. 4 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 7894 to 12187 Ω


HINT:

The temperature indicated in "Condition" is the temperature of the No. 4 exhaust gas temperature sensor.


If the result is not as specified, replace the No. 4 exhaust gas temperature sensor.